ASoC: arizona: Add signal activity output for DRC

When doing signal activity detection, the only output from the DRC will
often be a GPIO pin. This patch adds a signal activity output that is
activated when a GPIO is configured to output the DRC signal activity
detection.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

sound/soc/codecs/arizona.c

@@ -19,6 +19,7 @@
 #include <sound/tlv.h>
 
 #include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/gpio.h>
 #include <linux/mfd/arizona/registers.h>
 
 #include "arizona.h"
@@ -223,6 +224,38 @@ int arizona_init_spk(struct snd_soc_codec *codec)
 }
 EXPORT_SYMBOL_GPL(arizona_init_spk);
 
+int arizona_init_gpio(struct snd_soc_codec *codec)
+{
+	struct arizona_priv *priv = snd_soc_codec_get_drvdata(codec);
+	struct arizona *arizona = priv->arizona;
+	int i;
+
+	switch (arizona->type) {
+	case WM5110:
+		snd_soc_dapm_disable_pin(&codec->dapm, "DRC2 Signal Activity");
+	}
+
+	snd_soc_dapm_disable_pin(&codec->dapm, "DRC1 Signal Activity");
+
+	for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
+		switch (arizona->pdata.gpio_defaults[i] & ARIZONA_GPN_FN_MASK) {
+		case ARIZONA_GP_FN_DRC1_SIGNAL_DETECT:
+			snd_soc_dapm_enable_pin(&codec->dapm,
+						"DRC1 Signal Activity");
+			break;
+		case ARIZONA_GP_FN_DRC2_SIGNAL_DETECT:
+			snd_soc_dapm_enable_pin(&codec->dapm,
+						"DRC2 Signal Activity");
+			break;
+		default:
+			break;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(arizona_init_gpio);
+
 const char *arizona_mixer_texts[ARIZONA_NUM_MIXER_INPUTS] = {
 	"None",
 	"Tone Generator 1",

sound/soc/codecs/arizona.h

@@ -242,6 +242,7 @@ extern int arizona_set_fll(struct arizona_fll *fll, int source,
 			   unsigned int Fref, unsigned int Fout);
 
 extern int arizona_init_spk(struct snd_soc_codec *codec);
+extern int arizona_init_gpio(struct snd_soc_codec *codec);
 
 extern int arizona_init_dai(struct arizona_priv *priv, int dai);
 

sound/soc/codecs/wm5102.c

@@ -998,6 +998,8 @@ SND_SOC_DAPM_INPUT("IN2R"),
 SND_SOC_DAPM_INPUT("IN3L"),
 SND_SOC_DAPM_INPUT("IN3R"),
 
+SND_SOC_DAPM_OUTPUT("DRC1 Signal Activity"),
+
 SND_SOC_DAPM_PGA_E("IN1L PGA", ARIZONA_INPUT_ENABLES, ARIZONA_IN1L_ENA_SHIFT,
 		   0, NULL, 0, arizona_in_ev,
 		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD |
@@ -1614,6 +1616,9 @@ static const struct snd_soc_dapm_route wm5102_dapm_routes[] = {
 	{ "SPKDAT1R", NULL, "OUT5R" },
 
 	{ "MICSUPP", NULL, "SYSCLK" },
+
+	{ "DRC1 Signal Activity", NULL, "DRC1L" },
+	{ "DRC1 Signal Activity", NULL, "DRC1R" },
 };
 
 static int wm5102_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
@@ -1781,6 +1786,7 @@ static int wm5102_codec_probe(struct snd_soc_codec *codec)
 		return ret;
 
 	arizona_init_spk(codec);
+	arizona_init_gpio(codec);
 
 	snd_soc_dapm_disable_pin(&codec->dapm, "HAPTICS");
 

sound/soc/codecs/wm5110.c

@@ -432,6 +432,9 @@ SND_SOC_DAPM_INPUT("IN3R"),
 SND_SOC_DAPM_INPUT("IN4L"),
 SND_SOC_DAPM_INPUT("IN4R"),
 
+SND_SOC_DAPM_OUTPUT("DRC1 Signal Activity"),
+SND_SOC_DAPM_OUTPUT("DRC2 Signal Activity"),
+
 SND_SOC_DAPM_PGA_E("IN1L PGA", ARIZONA_INPUT_ENABLES, ARIZONA_IN1L_ENA_SHIFT,
 		   0, NULL, 0, arizona_in_ev,
 		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD |
@@ -1006,6 +1009,11 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = {
 	{ "SPKDAT2R", NULL, "OUT6R" },
 
 	{ "MICSUPP", NULL, "SYSCLK" },
+
+	{ "DRC1 Signal Activity", NULL, "DRC1L" },
+	{ "DRC1 Signal Activity", NULL, "DRC1R" },
+	{ "DRC2 Signal Activity", NULL, "DRC2L" },
+	{ "DRC2 Signal Activity", NULL, "DRC2R" },
 };
 
 static int wm5110_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
@@ -1170,6 +1178,7 @@ static int wm5110_codec_probe(struct snd_soc_codec *codec)
 		return ret;
 
 	arizona_init_spk(codec);
+	arizona_init_gpio(codec);
 
 	snd_soc_dapm_disable_pin(&codec->dapm, "HAPTICS");