Merge tag 'zynqmp-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx into next/dt

arm: dts: zynqmp: DT changes for v4.19

- Use serdev for BT in zcu100
- Remove ep108
- Fix gpio-keys binding
- Add suport for Ultra96

* tag 'zynqmp-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx:
  arm64: dts: zynqmp: Add support for Avnet Ultra96 rev1 board
  arm64: dts: zynqmp: Remove #address/#size-cells from gpio-keys
  arm64: dts: zynqmp: Remove ep108 board
  arm64: dts: zynqmp: Use serdev for zcu100 BT
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/xilinx/Makefile

 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += avnet-ultra96-rev1.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb

arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Avnet Ultra96 rev1
+ *
+ * (C) Copyright 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp-zcu100-revC.dts"
+
+/ {
+	model = "Avnet Ultra96 Rev1";
+	compatible = "avnet,ultra96-rev1", "avnet,ultra96",
+		     "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100",
+		     "xlnx,zynqmp";
+};

arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi

-// SPDX-License-Identifier: GPL-2.0+
-/*
- * clock specification for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/ {
-	misc_clk: misc_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	i2c_clk: i2c_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0x0>;
-		clock-frequency = <111111111>;
-	};
-
-	sata_clk: sata_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <75000000>;
-	};
-
-	clk100: clk100 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	clk600: clk600 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <600000000>;
-	};
-};
-
-&can0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&can1 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&fpd_dma_chan1 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan2 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan3 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan4 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan5 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan6 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan7 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan8 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&gem0 {
-	clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
-};
-
-&gpio {
-	clocks = <&misc_clk>;
-};
-
-&i2c0 {
-	clocks = <&i2c_clk>;
-};
-
-&i2c1 {
-	clocks = <&i2c_clk>;
-};
-
-&sata {
-	clocks = <&sata_clk>;
-};
-
-&sdhci0 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&sdhci1 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&spi0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&spi1 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&uart0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&usb0 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&usb1 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&watchdog0 {
-	clocks= <&misc_clk>;
-};

arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts

-// SPDX-License-Identifier: GPL-2.0+
-/*
- * dts file for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "zynqmp.dtsi"
-#include "zynqmp-ep108-clk.dtsi"
-
-/ {
-	model = "ZynqMP EP108";
-
-	aliases {
-		mmc0 = &sdhci0;
-		mmc1 = &sdhci1;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-};
-
-&can0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&gem0 {
-	status = "okay";
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
-	phy0: phy@0 {
-		reg = <0>;
-		max-speed = <100>;
-	};
-};
-
-&gpio {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-	eeprom@55 {
-		compatible = "atmel,24c64";
-		reg = <0x55>;
-	};
-};
-
-&sata {
-	status = "okay";
-	ceva,broken-gen2;
-	/* SATA Phy OOB timing settings */
-	ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-	ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-	ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-	ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-	ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-	ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-	ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-	ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-};
-
-&sdhci0 {
-	status = "okay";
-	bus-width = <8>;
-};
-
-&sdhci1 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-	num-cs = <1>;
-	spi0_flash0: spi0_flash0@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-
-		spi0_flash0@0 {
-			label = "spi0_flash0";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	num-cs = <1>;
-	spi1_flash0: spi1_flash0@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-
-		spi1_flash0@0 {
-			label = "spi1_flash0";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "peripheral";
-	maximum-speed = "high-speed";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-	maximum-speed = "high-speed";
-};
-
-&watchdog0 {
-	status = "okay";
-};

arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts

@@ -44,8 +44,6 @@ memory@0 {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw4 {
 			label = "sw4";
@@ -89,12 +87,6 @@ vbus_det { /* U5 USB5744 VBUS detection via MIO25 */
 			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-
-		bt_power {
-			label = "bt_power";
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
 	};
 
 	wmmcsdio_fixed: fixedregulator-mmcsdio {
@@ -267,6 +259,10 @@ &spi1 { /* High Speed connector */
 
 &uart0 {
 	status = "okay";
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &uart1 {

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts

@@ -41,8 +41,6 @@ memory@0 {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw19 {
 			label = "sw19";

arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts

@@ -41,8 +41,6 @@ memory@0 {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw19 {
 			label = "sw19";

arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts

@@ -41,8 +41,6 @@ memory@0 {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw19 {
 			label = "sw19";