Commit b7056bc1 authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Paul Mundt

sh: modify to enable boot for EcoVec24

Signed-off-by: default avatarKuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent b37c7c66
......@@ -19,14 +19,14 @@
#include <cpu/sh7724.h>
/*
* Area Address Interface size BusWidth
* 0 0x0000_0000 ~ 0x03FF_FFFF FROM 64MB 16bit
* 1 0x0400_0000 ~ 0x07FF_FFFF Internal I/O 64MB 16/32bit
* 2 0x0800_0000 ~ 0x0BFF_FFFF DRAM 2 64MB 32bit
* 3 0x0C00_0000 ~ 0x0FFF_FFFF DRAM 3 64MB 32bit
* 4 0x1000_0000 ~ 0x13FF_FFFF DRAM 4 64MB 32bit
* 5 0x1400_0000 ~ 0x17FF_FFFF DRAM 5 64MB 32bit
* 6 0x1800_0000 ~ 0x1BFF_FFFF MFI 64MB 16bit
* Address Interface BusWidth
*-----------------------------------------
* 0x0000_0000 uboot 16bit
* 0x0004_0000 Linux romImage 16bit
* 0x0014_0000 MTD for Linux 16bit
* 0x0400_0000 Internal I/O 16/32bit
* 0x0800_0000 DRAM 32bit
* 0x1800_0000 MFI 16bit
*/
/* Heartbeat */
......@@ -58,14 +58,10 @@ static struct platform_device heartbeat_device = {
/* MTD */
static struct mtd_partition nor_flash_partitions[] = {
{
.name = "uboot",
.name = "boot loader",
.offset = 0,
.size = (256 * 1024),
.size = (5 * 1024 * 1024),
.mask_flags = MTD_CAP_ROM,
}, {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = (2 * 1024 * 1024),
}, {
.name = "free-area",
.offset = MTDPART_OFS_APPEND,
......@@ -107,17 +103,16 @@ static int __init devices_setup(void)
/* enable SCIFA0 */
gpio_request(GPIO_FN_SCIF0_TXD, NULL);
gpio_request(GPIO_FN_SCIF0_RXD, NULL);
gpio_request(GPIO_FN_SCIF0_SCK, NULL);
/* enable debug LED */
gpio_request(GPIO_PTG0, NULL);
gpio_request(GPIO_PTG1, NULL);
gpio_request(GPIO_PTG2, NULL);
gpio_request(GPIO_PTG3, NULL);
gpio_direction_output(GPIO_PTT0, 0);
gpio_direction_output(GPIO_PTT1, 0);
gpio_direction_output(GPIO_PTT2, 0);
gpio_direction_output(GPIO_PTT3, 0);
gpio_direction_output(GPIO_PTG0, 0);
gpio_direction_output(GPIO_PTG1, 0);
gpio_direction_output(GPIO_PTG2, 0);
gpio_direction_output(GPIO_PTG3, 0);
return platform_add_devices(ecovec_devices,
ARRAY_SIZE(ecovec_devices));
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc6
# Tue Aug 18 11:32:44 2009
# Linux kernel version: 2.6.31-rc7
# Wed Aug 26 09:09:07 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
......@@ -151,7 +151,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
CONFIG_FREEZER=y
#
# System type
......@@ -185,6 +185,7 @@ CONFIG_ARCH_SHMOBILE=y
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
......@@ -314,7 +315,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=tty0, console=ttySC3,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
#
# Bus options
......@@ -333,7 +334,13 @@ CONFIG_BINFMT_ELF=y
#
# Power management options (EXPERIMENTAL)
#
# CONFIG_PM is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
......@@ -641,7 +648,7 @@ CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SH_ETH=y
CONFIG_SMC91X=y
# CONFIG_SMC91X is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
......@@ -1048,6 +1055,7 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment