Commit b71818cb authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Maxime Ripard

arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks

A few clocks from the CCU were exported later, and references to them in
the device tree were using raw numbers.

Now that the DT binding header changes are in as well, switch to the
macros for more clarity.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
parent 765866ed
...@@ -590,7 +590,7 @@ pio: pinctrl@1c20800 { ...@@ -590,7 +590,7 @@ pio: pinctrl@1c20800 {
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 58>, <&osc24M>, <&rtc 0>; clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc"; clock-names = "apb", "hosc", "losc";
gpio-controller; gpio-controller;
#gpio-cells = <3>; #gpio-cells = <3>;
...@@ -1091,7 +1091,7 @@ hdmi_phy: hdmi-phy@1ef0000 { ...@@ -1091,7 +1091,7 @@ hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun50i-a64-hdmi-phy"; compatible = "allwinner,sun50i-a64-hdmi-phy";
reg = <0x01ef0000 0x10000>; reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
<&ccu 7>; <&ccu CLK_PLL_VIDEO0>;
clock-names = "bus", "mod", "pll-0"; clock-names = "bus", "mod", "pll-0";
resets = <&ccu RST_BUS_HDMI0>; resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy"; reset-names = "phy";
...@@ -1121,7 +1121,8 @@ r_intc: interrupt-controller@1f00c00 { ...@@ -1121,7 +1121,8 @@ r_intc: interrupt-controller@1f00c00 {
r_ccu: clock@1f01400 { r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu"; compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>; reg = <0x01f01400 0x100>;
clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>; clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph"; clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>; #clock-cells = <1>;
#reset-cells = <1>; #reset-cells = <1>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment