Commit b7e968da authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Greg Kroah-Hartman

MIPS: ralink: Remove unused rt*_wdt_reset functions

commit 886f9c69 upstream.

All pointers to these functions were removed, so now they produce
warnings:

arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function]

This removes the functions. If we need them again, the patch can be
reverted later.

Fixes: f576fb6a ("MIPS: ralink: cleanup the soc specific pinmux data")
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Cc: John Crispin <john@phrozen.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15044/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent dd2419e1
......@@ -40,16 +40,6 @@ static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
{ 0 }
};
static void rt288x_wdt_reset(void)
{
u32 t;
/* enable WDT reset output on pin SRAM_CS_N */
t = rt_sysc_r32(SYSC_REG_CLKCFG);
t |= CLKCFG_SRAM_CS_N_WDT;
rt_sysc_w32(t, SYSC_REG_CLKCFG);
}
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, wmac_rate = 40000000;
......
......@@ -89,17 +89,6 @@ static struct rt2880_pmx_group rt5350_pinmux_data[] = {
{ 0 }
};
static void rt305x_wdt_reset(void)
{
u32 t;
/* enable WDT reset output on pin SRAM_CS_N */
t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT <<
RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT;
rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
}
static unsigned long rt5350_get_mem_size(void)
{
void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
......
......@@ -63,16 +63,6 @@ static struct rt2880_pmx_group rt3883_pinmux_data[] = {
{ 0 }
};
static void rt3883_wdt_reset(void)
{
u32 t;
/* enable WDT reset output on GPIO 2 */
t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
}
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, sys_rate;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment