Staging: et131x: tidy eeprom code up

Turn this one into something resembling a clean Linux driver
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/et131x/et1310_eeprom.h

@@ -61,12 +61,46 @@
 
 #include "et1310_address_map.h"
 
+/*
+ * EEPROM Defines
+ */
+
+/* LBCIF Register Groups (addressed via 32-bit offsets) */
+#define LBCIF_DWORD0_GROUP       0xAC
+#define LBCIF_DWORD1_GROUP       0xB0
+
+/* LBCIF Registers (addressed via 8-bit offsets) */
+#define LBCIF_ADDRESS_REGISTER   0xAC
+#define LBCIF_DATA_REGISTER      0xB0
+#define LBCIF_CONTROL_REGISTER   0xB1
+#define LBCIF_STATUS_REGISTER    0xB2
+
+/* LBCIF Control Register Bits */
+#define LBCIF_CONTROL_SEQUENTIAL_READ   0x01
+#define LBCIF_CONTROL_PAGE_WRITE        0x02
+#define LBCIF_CONTROL_EEPROM_RELOAD     0x08
+#define LBCIF_CONTROL_TWO_BYTE_ADDR     0x20
+#define LBCIF_CONTROL_I2C_WRITE         0x40
+#define LBCIF_CONTROL_LBCIF_ENABLE      0x80
+
+/* LBCIF Status Register Bits */
+#define LBCIF_STATUS_PHY_QUEUE_AVAIL    0x01
+#define LBCIF_STATUS_I2C_IDLE           0x02
+#define LBCIF_STATUS_ACK_ERROR          0x04
+#define LBCIF_STATUS_GENERAL_ERROR      0x08
+#define LBCIF_STATUS_CHECKSUM_ERROR     0x40
+#define LBCIF_STATUS_EEPROM_PRESENT     0x80
+
+/* Miscellaneous Constraints */
+#define MAX_NUM_REGISTER_POLLS          1000
+#define MAX_NUM_WRITE_RETRIES           2
+
 /* Forward declaration of the private adapter structure */
 struct et131x_adapter;
 
-int EepromWriteByte(struct et131x_adapter *adapter, u32 unAddress,
+int eeprom_write(struct et131x_adapter *adapter, u32 unAddress,
 			u8 bData);
-int EepromReadByte(struct et131x_adapter *adapter, u32 unAddress,
+int eeprom_read(struct et131x_adapter *adapter, u32 unAddress,
 			u8 *pbData);
 
 #endif /* _ET1310_EEPROM_H_ */

drivers/staging/et131x/et131x_initpci.c

@@ -199,7 +199,7 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
 			 * corruption seen with 1310 B Silicon
 			 */
 			for (nLoop = 0; nLoop < 3; nLoop++) {
-				EepromWriteByte(adapter, nLoop, temp[nLoop]);
+				eeprom_write(adapter, nLoop, temp[nLoop]);
 			}
 		}
 
@@ -219,8 +219,8 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
 	/* Read the EEPROM for information regarding LED behavior. Refer to
 	 * ET1310_phy.c, et131x_xcvr_init(), for its use.
 	 */
-	EepromReadByte(adapter, 0x70, &adapter->eepromData[0]);
-	EepromReadByte(adapter, 0x71, &adapter->eepromData[1]);
+	eeprom_read(adapter, 0x70, &adapter->eepromData[0]);
+	eeprom_read(adapter, 0x71, &adapter->eepromData[1]);
 
 	if (adapter->eepromData[0] != 0xcd)
 		/* Disable all optional features */