dt-bindings: Convert Faraday FTIDE010 to DT schema

This uses the new pata-common.yaml schema to
convert the Faraday FTIDE010 to DT schema.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/ata/faraday,ftide010.txt

-* Faraday Technology FTIDE010 PATA controller
-
-This controller is the first Faraday IDE interface block, used in the
-StorLink SL2312 and SL3516, later known as the Cortina Systems Gemini
-platform. The controller can do PIO modes 0 through 4, Multi-word DMA
-(MWDM)modes 0 through 2 and Ultra DMA modes 0 through 6.
-
-On the Gemini platform, this PATA block is accompanied by a PATA to
-SATA bridge in order to support SATA. This is why a phandle to that
-controller is compulsory on that platform.
-
-The timing properties are unique per-SoC, not per-board.
-
-Required properties:
-- compatible: should be one of
-  "cortina,gemini-pata", "faraday,ftide010"
-  "faraday,ftide010"
-- interrupts: interrupt for the block
-- reg: registers and size for the block
-
-Optional properties:
-- clocks: a SoC clock running the peripheral.
-- clock-names: should be set to "PCLK" for the peripheral clock.
-
-Required properties for "cortina,gemini-pata" compatible:
-- sata: a phande to the Gemini PATA to SATA bridge, see
-  cortina,gemini-sata-bridge.txt for details.
-
-Example:
-
-ata@63000000 {
-	compatible = "cortina,gemini-pata", "faraday,ftide010";
-	reg = <0x63000000 0x100>;
-	interrupts = <4 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&gcc GEMINI_CLK_GATE_IDE>;
-	clock-names = "PCLK";
-	sata = <&sata>;
-};

Documentation/devicetree/bindings/ata/faraday,ftide010.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/faraday,ftide010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTIDE010 PATA controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This controller is the first Faraday IDE interface block, used in the
+  StorLink SL3512 and SL3516, later known as the Cortina Systems Gemini
+  platform. The controller can do PIO modes 0 through 4, Multi-word DMA
+  (MWDM) modes 0 through 2 and Ultra DMA modes 0 through 6.
+
+  On the Gemini platform, this PATA block is accompanied by a PATA to
+  SATA bridge in order to support SATA. This is why a phandle to that
+  controller is compulsory on that platform.
+
+  The timing properties are unique per-SoC, not per-board.
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftide010
+      - items:
+        - const: cortina,gemini-pata
+        - const: faraday,ftide010
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    const: PCLK
+
+  sata:
+    description:
+      phandle to the Gemini PATA to SATA bridge, if available
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: pata-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cortina,gemini-pata
+
+    then:
+      required:
+        - sata
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+
+    ide@63000000 {
+      compatible = "cortina,gemini-pata", "faraday,ftide010";
+      reg = <0x63000000 0x100>;
+      interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&gcc GEMINI_CLK_GATE_IDE>;
+      clock-names = "PCLK";
+      sata = <&sata>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ide-port@0 {
+        reg = <0>;
+      };
+      ide-port@1 {
+        reg = <1>;
+      };
+    };
+
+...