Skip to content

L
linux
Commit b906faf7 authored by Sean Wang's avatar Sean Wang Committed by Linus Walleij
Browse files
Options

pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c 

This patch adds members sz_reg fixed in struct mtk_pin_field_calc

- The 'fixed' is used to represent the consecutive pins share the same
bits within the same register with the 1st pin so that it can largely
reduce the entry size a bit.

- The 'sz_reg' is used to indicate the range of bits we use in a register
  that may vary by SoC

The above changes make the code more generic and this is useful as there
might be other existing or future chips all use the same logic to access
their register set and then being a little more abstract could help in the
long run.
Signed-off-by: default avatarRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent e78d57b2
Hide whitespace changes
Inline Side-by-side
Showing with 126 additions and 126 deletions
drivers/pinctrl/mediatek/pinctrl-mt7622.c
View file @ b906faf7
......@@ -9,159 +9,129 @@
#include "pinctrl-moore.h"
static const struct mtk_pin_field_calc mt7622_pin_mode_range[] = {
{0, 0, 0x320, 0x10, 16, 4},
{1, 4, 0x3a0, 0x10, 16, 4},
{5, 5, 0x320, 0x10, 0, 4},
{6, 6, 0x300, 0x10, 4, 4},
{7, 7, 0x300, 0x10, 4, 4},
{8, 9, 0x350, 0x10, 20, 4},
{10, 10, 0x300, 0x10, 8, 4},
{11, 11, 0x300, 0x10, 8, 4},
{12, 12, 0x300, 0x10, 8, 4},
{13, 13, 0x300, 0x10, 8, 4},
{14, 15, 0x320, 0x10, 4, 4},
{16, 17, 0x320, 0x10, 20, 4},
{18, 21, 0x310, 0x10, 16, 4},
{22, 22, 0x380, 0x10, 16, 4},
{23, 23, 0x300, 0x10, 24, 4},
{24, 24, 0x300, 0x10, 24, 4},
{25, 25, 0x300, 0x10, 12, 4},
{25, 25, 0x300, 0x10, 12, 4},
{26, 26, 0x300, 0x10, 12, 4},
{27, 27, 0x300, 0x10, 12, 4},
{28, 28, 0x300, 0x10, 12, 4},
{29, 29, 0x300, 0x10, 12, 4},
{30, 30, 0x300, 0x10, 12, 4},
{31, 31, 0x300, 0x10, 12, 4},
{32, 32, 0x300, 0x10, 12, 4},
{33, 33, 0x300, 0x10, 12, 4},
{34, 34, 0x300, 0x10, 12, 4},
{35, 35, 0x300, 0x10, 12, 4},
{36, 36, 0x300, 0x10, 12, 4},
{37, 37, 0x300, 0x10, 20, 4},
{38, 38, 0x300, 0x10, 20, 4},
{39, 39, 0x300, 0x10, 20, 4},
{40, 40, 0x300, 0x10, 20, 4},
{41, 41, 0x300, 0x10, 20, 4},
{42, 42, 0x300, 0x10, 20, 4},
{43, 43, 0x300, 0x10, 20, 4},
{44, 44, 0x300, 0x10, 20, 4},
{45, 46, 0x300, 0x10, 20, 4},
{47, 47, 0x300, 0x10, 20, 4},
{48, 48, 0x300, 0x10, 20, 4},
{49, 49, 0x300, 0x10, 20, 4},
{50, 50, 0x300, 0x10, 20, 4},
{51, 70, 0x330, 0x10, 4, 4},
{71, 71, 0x300, 0x10, 16, 4},
{72, 72, 0x300, 0x10, 16, 4},
{73, 76, 0x310, 0x10, 0, 4},
{77, 77, 0x320, 0x10, 28, 4},
{78, 78, 0x320, 0x10, 12, 4},
{79, 82, 0x3a0, 0x10, 0, 4},
{83, 83, 0x350, 0x10, 28, 4},
{84, 84, 0x330, 0x10, 0, 4},
{85, 90, 0x360, 0x10, 4, 4},
{91, 94, 0x390, 0x10, 16, 4},
{95, 97, 0x380, 0x10, 20, 4},
{98, 101, 0x390, 0x10, 0, 4},
{102, 102, 0x360, 0x10, 0, 4},
PIN_FIELD(0, 0, 0x320, 0x10, 16, 4),
PIN_FIELD(1, 4, 0x3a0, 0x10, 16, 4),
PIN_FIELD(5, 5, 0x320, 0x10, 0, 4),
PINS_FIELD(6, 7, 0x300, 0x10, 4, 4),
PIN_FIELD(8, 9, 0x350, 0x10, 20, 4),
PINS_FIELD(10, 13, 0x300, 0x10, 8, 4),
PIN_FIELD(14, 15, 0x320, 0x10, 4, 4),
PIN_FIELD(16, 17, 0x320, 0x10, 20, 4),
PIN_FIELD(18, 21, 0x310, 0x10, 16, 4),
PIN_FIELD(22, 22, 0x380, 0x10, 16, 4),
PINS_FIELD(23, 24, 0x300, 0x10, 24, 4),
PINS_FIELD(25, 36, 0x300, 0x10, 12, 4),
PINS_FIELD(37, 50, 0x300, 0x10, 20, 4),
PIN_FIELD(51, 70, 0x330, 0x10, 4, 4),
PINS_FIELD(71, 72, 0x300, 0x10, 16, 4),
PIN_FIELD(73, 76, 0x310, 0x10, 0, 4),
PIN_FIELD(77, 77, 0x320, 0x10, 28, 4),
PIN_FIELD(78, 78, 0x320, 0x10, 12, 4),
PIN_FIELD(79, 82, 0x3a0, 0x10, 0, 4),
PIN_FIELD(83, 83, 0x350, 0x10, 28, 4),
PIN_FIELD(84, 84, 0x330, 0x10, 0, 4),
PIN_FIELD(85, 90, 0x360, 0x10, 4, 4),
PIN_FIELD(91, 94, 0x390, 0x10, 16, 4),
PIN_FIELD(95, 97, 0x380, 0x10, 20, 4),
PIN_FIELD(98, 101, 0x390, 0x10, 0, 4),
PIN_FIELD(102, 102, 0x360, 0x10, 0, 4),
};
static const struct mtk_pin_field_calc mt7622_pin_dir_range[] = {
{0, 102, 0x0, 0x10, 0, 1},
PIN_FIELD(0, 102, 0x0, 0x10, 0, 1),
};
static const struct mtk_pin_field_calc mt7622_pin_di_range[] = {
{0, 102, 0x200, 0x10, 0, 1},
PIN_FIELD(0, 102, 0x200, 0x10, 0, 1),
};
static const struct mtk_pin_field_calc mt7622_pin_do_range[] = {
{0, 102, 0x100, 0x10, 0, 1},
PIN_FIELD(0, 102, 0x100, 0x10, 0, 1),
};
static const struct mtk_pin_field_calc mt7622_pin_sr_range[] = {
{0, 31, 0x910, 0x10, 0, 1},
{32, 50, 0xa10, 0x10, 0, 1},
{51, 70, 0x810, 0x10, 0, 1},
{71, 72, 0xb10, 0x10, 0, 1},
{73, 86, 0xb10, 0x10, 4, 1},
{87, 90, 0xc10, 0x10, 0, 1},
{91, 102, 0xb10, 0x10, 18, 1},
PIN_FIELD(0, 31, 0x910, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa10, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x810, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb10, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb10, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc10, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb10, 0x10, 18, 1),
};
static const struct mtk_pin_field_calc mt7622_pin_smt_range[] = {
{0, 31, 0x920, 0x10, 0, 1},
{32, 50, 0xa20, 0x10, 0, 1},
{51, 70, 0x820, 0x10, 0, 1},
{71, 72, 0xb20, 0x10, 0, 1},
{73, 86, 0xb20, 0x10, 4, 1},
{87, 90, 0xc20, 0x10, 0, 1},
{91, 102, 0xb20, 0x10, 18, 1},
PIN_FIELD(0, 31, 0x920, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa20, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x820, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb20, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb20, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc20, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb20, 0x10, 18, 1),
};
static const struct mtk_pin_field_calc mt7622_pin_pu_range[] = {
{0, 31, 0x930, 0x10, 0, 1},
{32, 50, 0xa30, 0x10, 0, 1},
{51, 70, 0x830, 0x10, 0, 1},
{71, 72, 0xb30, 0x10, 0, 1},
{73, 86, 0xb30, 0x10, 4, 1},
{87, 90, 0xc30, 0x10, 0, 1},
{91, 102, 0xb30, 0x10, 18, 1},
PIN_FIELD(0, 31, 0x930, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa30, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x830, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb30, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb30, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc30, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb30, 0x10, 18, 1),
};
static const struct mtk_pin_field_calc mt7622_pin_pd_range[] = {
{0, 31, 0x940, 0x10, 0, 1},
{32, 50, 0xa40, 0x10, 0, 1},
{51, 70, 0x840, 0x10, 0, 1},
{71, 72, 0xb40, 0x10, 0, 1},
{73, 86, 0xb40, 0x10, 4, 1},
{87, 90, 0xc40, 0x10, 0, 1},
{91, 102, 0xb40, 0x10, 18, 1},
PIN_FIELD(0, 31, 0x940, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa40, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x840, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb40, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb40, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc40, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb40, 0x10, 18, 1),
};
static const struct mtk_pin_field_calc mt7622_pin_e4_range[] = {
{0, 31, 0x960, 0x10, 0, 1},
{32, 50, 0xa60, 0x10, 0, 1},
{51, 70, 0x860, 0x10, 0, 1},
{71, 72, 0xb60, 0x10, 0, 1},
{73, 86, 0xb60, 0x10, 4, 1},
{87, 90, 0xc60, 0x10, 0, 1},
{91, 102, 0xb60, 0x10, 18, 1},
PIN_FIELD(0, 31, 0x960, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa60, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x860, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb60, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb60, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc60, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb60, 0x10, 18, 1),
};
static const struct mtk_pin_field_calc mt7622_pin_e8_range[] = {
{0, 31, 0x970, 0x10, 0, 1},
{32, 50, 0xa70, 0x10, 0, 1},
{51, 70, 0x870, 0x10, 0, 1},
{71, 72, 0xb70, 0x10, 0, 1},
{73, 86, 0xb70, 0x10, 4, 1},
{87, 90, 0xc70, 0x10, 0, 1},
{91, 102, 0xb70, 0x10, 18, 1},
PIN_FIELD(0, 31, 0x970, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa70, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x870, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb70, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb70, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc70, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb70, 0x10, 18, 1),
};
static const struct mtk_pin_field_calc mt7622_pin_tdsel_range[] = {
{0, 31, 0x980, 0x4, 0, 4},
{32, 50, 0xa80, 0x4, 0, 4},
{51, 70, 0x880, 0x4, 0, 4},
{71, 72, 0xb80, 0x4, 0, 4},
{73, 86, 0xb80, 0x4, 16, 4},
{87, 90, 0xc80, 0x4, 0, 4},
{91, 102, 0xb88, 0x4, 8, 4},
PIN_FIELD(0, 31, 0x980, 0x4, 0, 4),
PIN_FIELD(32, 50, 0xa80, 0x4, 0, 4),
PIN_FIELD(51, 70, 0x880, 0x4, 0, 4),
PIN_FIELD(71, 72, 0xb80, 0x4, 0, 4),
PIN_FIELD(73, 86, 0xb80, 0x4, 16, 4),
PIN_FIELD(87, 90, 0xc80, 0x4, 0, 4),
PIN_FIELD(91, 102, 0xb88, 0x4, 8, 4),
};
static const struct mtk_pin_field_calc mt7622_pin_rdsel_range[] = {
{0, 31, 0x990, 0x4, 0, 6},
{32, 50, 0xa90, 0x4, 0, 6},
{51, 58, 0x890, 0x4, 0, 6},
{59, 60, 0x894, 0x4, 28, 6},
{61, 62, 0x894, 0x4, 16, 6},
{63, 66, 0x898, 0x4, 8, 6},
{67, 68, 0x89c, 0x4, 12, 6},
{69, 70, 0x89c, 0x4, 0, 6},
{71, 72, 0xb90, 0x4, 0, 6},
{73, 86, 0xb90, 0x4, 24, 6},
{87, 90, 0xc90, 0x4, 0, 6},
{91, 102, 0xb9c, 0x4, 12, 6},
PIN_FIELD(0, 31, 0x990, 0x4, 0, 6),
PIN_FIELD(32, 50, 0xa90, 0x4, 0, 6),
PIN_FIELD(51, 58, 0x890, 0x4, 0, 6),
PIN_FIELD(59, 60, 0x894, 0x4, 28, 6),
PIN_FIELD(61, 62, 0x894, 0x4, 16, 6),
PIN_FIELD(63, 66, 0x898, 0x4, 8, 6),
PIN_FIELD(67, 68, 0x89c, 0x4, 12, 6),
PIN_FIELD(69, 70, 0x89c, 0x4, 0, 6),
PIN_FIELD(71, 72, 0xb90, 0x4, 0, 6),
PIN_FIELD(73, 86, 0xb90, 0x4, 24, 6),
PIN_FIELD(87, 90, 0xc90, 0x4, 0, 6),
PIN_FIELD(91, 102, 0xb9c, 0x4, 12, 6),
};
static const struct mtk_pin_reg_calc mt7622_reg_cals[PINCTRL_PIN_REG_MAX] = {
......
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
View file @ b906faf7
......@@ -54,19 +54,24 @@ static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw, int pin,
return -EINVAL;
}
/* Caculated bits as the overall offset the pin is located at */
bits = c->s_bit + (pin - c->s_pin) * (c->x_bits);
/* Calculated bits as the overall offset the pin is located at,
* if c->fixed is held, that determines the all the pins in the
* range use the same field with the s_pin.
*/
bits = c->fixed ? c->s_bit : c->s_bit + (pin - c->s_pin) * (c->x_bits);
/* Fill pfd from bits and 32-bit register applied is assumed */
pfd->offset = c->s_addr + c->x_addrs * (bits / 32);
pfd->bitpos = bits % 32;
/* Fill pfd from bits. For example 32-bit register applied is assumed
* when c->sz_reg is equal to 32.
*/
pfd->offset = c->s_addr + c->x_addrs * (bits / c->sz_reg);
pfd->bitpos = bits % c->sz_reg;
pfd->mask = (1 << c->x_bits) - 1;
/* pfd->next is used for indicating that bit wrapping-around happens
* which requires the manipulation for bit 0 starting in the next
* register to form the complete field read/write.
*/
pfd->next = pfd->bitpos + c->x_bits - 1 > 31 ? c->x_addrs : 0;
pfd->next = pfd->bitpos + c->x_bits > c->sz_reg ? c->x_addrs : 0;
return 0;
}
......
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
View file @ b906faf7
......@@ -15,6 +15,26 @@
#define MTK_DISABLE 0
#define MTK_ENABLE 1
#define PIN_FIELD_CALC(_s_pin, _e_pin, _s_addr, _x_addrs, _s_bit, \
_x_bits, _sz_reg, _fixed) { \
.s_pin = _s_pin, \
.e_pin = _e_pin, \
.s_addr = _s_addr, \
.x_addrs = _x_addrs, \
.s_bit = _s_bit, \
.x_bits = _x_bits, \
.sz_reg = _sz_reg, \
.fixed = _fixed, \
}
#define PIN_FIELD(_s_pin, _e_pin, _s_addr, _x_addrs, _s_bit, _x_bits) \
PIN_FIELD_CALC(_s_pin, _e_pin, _s_addr, _x_addrs, _s_bit, \
_x_bits, 32, 0)
#define PINS_FIELD(_s_pin, _e_pin, _s_addr, _x_addrs, _s_bit, _x_bits) \
PIN_FIELD_CALC(_s_pin, _e_pin, _s_addr, _x_addrs, _s_bit, \
_x_bits, 32, 1)
/* List these attributes which could be modified for the pin */
enum {
PINCTRL_PIN_REG_MODE,
......@@ -57,6 +77,9 @@ struct mtk_pin_field {
* @s_bit: the start bit for the first register within the range
* @x_bits: the bit distance between two consecutive pins within
* the range
* @sz_reg: the size of bits in a register
* @fixed: the consecutive pins share the same bits with the 1st
* pin
*/
struct mtk_pin_field_calc {
u16 s_pin;
......@@ -65,6 +88,8 @@ struct mtk_pin_field_calc {
u8 x_addrs;
u8 s_bit;
u8 x_bits;
u8 sz_reg;
u8 fixed;
};
/* struct mtk_pin_reg_calc - the structure that holds all ranges used to
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7