ARM: dts: AM33XX: Rename I2C and GPIO nodes

Rename I2C and GPIO nodes according to AM33XX TRM. According to
AM33XX TRM device instances are starting from "0" like i2c0, i2c1
and i2c3.
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
[panto@antoniou-consulting.com: initial patch by pantelis's]
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>

arch/arm/boot/dts/am335x-bone.dts

@@ -43,7 +43,7 @@ uart1: serial@44e09000 {
 			status = "okay";
 		};
 
-		i2c1: i2c@44e0b000 {
+		i2c0: i2c@44e0b000 {
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -59,27 +59,27 @@ leds {
 
 		led@2 {
 			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio2 21 0>;
+			gpios = <&gpio1 21 0>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led@3 {
 			label = "beaglebone:green:mmc0";
-			gpios = <&gpio2 22 0>;
+			gpios = <&gpio1 22 0>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led@4 {
 			label = "beaglebone:green:usr2";
-			gpios = <&gpio2 23 0>;
+			gpios = <&gpio1 23 0>;
 			default-state = "off";
 		};
 
 		led@5 {
 			label = "beaglebone:green:usr3";
-			gpios = <&gpio2 24 0>;
+			gpios = <&gpio1 24 0>;
 			default-state = "off";
 		};
 	};

arch/arm/boot/dts/am335x-evm.dts

@@ -51,7 +51,7 @@ uart1: serial@44e09000 {
 			status = "okay";
 		};
 
-		i2c1: i2c@44e0b000 {
+		i2c0: i2c@44e0b000 {
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -60,7 +60,7 @@ tps: tps@2d {
 			};
 		};
 
-		i2c2: i2c@4802a000 {
+		i2c1: i2c@4802a000 {
 			status = "okay";
 			clock-frequency = <100000>;
 
@@ -123,12 +123,12 @@ matrix_keypad: matrix_keypad@0 {
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
 
-		row-gpios = <&gpio2 25 0	/* Bank1, pin25 */
-			     &gpio2 26 0	/* Bank1, pin26 */
-			     &gpio2 27 0>;	/* Bank1, pin27 */
+		row-gpios = <&gpio1 25 0	/* Bank1, pin25 */
+			     &gpio1 26 0	/* Bank1, pin26 */
+			     &gpio1 27 0>;	/* Bank1, pin27 */
 
-		col-gpios = <&gpio2 21 0	/* Bank1, pin21 */
-			     &gpio2 22 0>;	/* Bank1, pin22 */
+		col-gpios = <&gpio1 21 0	/* Bank1, pin21 */
+			     &gpio1 22 0>;	/* Bank1, pin22 */
 
 		linux,keymap = <0x0000008b	/* MENU */
 				0x0100009e	/* BACK */
@@ -147,14 +147,14 @@ gpio_keys: volume_keys@0 {
 		switch@9 {
 			label = "volume-up";
 			linux,code = <115>;
-			gpios = <&gpio1 2 1>;
+			gpios = <&gpio0 2 1>;
 			gpio-key,wakeup;
 		};
 
 		switch@10 {
 			label = "volume-down";
 			linux,code = <114>;
-			gpios = <&gpio1 3 1>;
+			gpios = <&gpio0 3 1>;
 			gpio-key,wakeup;
 		};
 	};

arch/arm/boot/dts/am335x-evmsk.dts

@@ -58,7 +58,7 @@ uart1: serial@44e09000 {
 			status = "okay";
 		};
 
-		i2c1: i2c@44e0b000 {
+		i2c0: i2c@44e0b000 {
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -115,26 +115,26 @@ leds {
 
 		led@1 {
 			label = "evmsk:green:usr0";
-			gpios = <&gpio2 4 0>;
+			gpios = <&gpio1 4 0>;
 			default-state = "off";
 		};
 
 		led@2 {
 			label = "evmsk:green:usr1";
-			gpios = <&gpio2 5 0>;
+			gpios = <&gpio1 5 0>;
 			default-state = "off";
 		};
 
 		led@3 {
 			label = "evmsk:green:mmc0";
-			gpios = <&gpio2 6 0>;
+			gpios = <&gpio1 6 0>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led@4 {
 			label = "evmsk:green:heartbeat";
-			gpios = <&gpio2 7 0>;
+			gpios = <&gpio1 7 0>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
@@ -148,26 +148,26 @@ gpio_buttons: gpio_buttons@0 {
 		switch@1 {
 			label = "button0";
 			linux,code = <0x100>;
-			gpios = <&gpio3 3 0>;
+			gpios = <&gpio2 3 0>;
 		};
 
 		switch@2 {
 			label = "button1";
 			linux,code = <0x101>;
-			gpios = <&gpio3 2 0>;
+			gpios = <&gpio2 2 0>;
 		};
 
 		switch@3 {
 			label = "button2";
 			linux,code = <0x102>;
-			gpios = <&gpio1 30 0>;
+			gpios = <&gpio0 30 0>;
 			gpio-key,wakeup;
 		};
 
 		switch@4 {
 			label = "button3";
 			linux,code = <0x103>;
-			gpios = <&gpio3 5 0>;
+			gpios = <&gpio2 5 0>;
 		};
 	};
 };

arch/arm/boot/dts/am33xx.dtsi

@@ -87,7 +87,7 @@ intc: interrupt-controller@48200000 {
 			reg = <0x48200000 0x1000>;
 		};
 
-		gpio1: gpio@44e07000 {
+		gpio0: gpio@44e07000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio1";
 			gpio-controller;
@@ -98,7 +98,7 @@ gpio1: gpio@44e07000 {
 			interrupts = <96>;
 		};
 
-		gpio2: gpio@4804c000 {
+		gpio1: gpio@4804c000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio2";
 			gpio-controller;
@@ -109,7 +109,7 @@ gpio2: gpio@4804c000 {
 			interrupts = <98>;
 		};
 
-		gpio3: gpio@481ac000 {
+		gpio2: gpio@481ac000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio3";
 			gpio-controller;
@@ -120,7 +120,7 @@ gpio3: gpio@481ac000 {
 			interrupts = <32>;
 		};
 
-		gpio4: gpio@481ae000 {
+		gpio3: gpio@481ae000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio4";
 			gpio-controller;
@@ -185,7 +185,7 @@ uart6: serial@481aa000 {
 			status = "disabled";
 		};
 
-		i2c1: i2c@44e0b000 {
+		i2c0: i2c@44e0b000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -195,7 +195,7 @@ i2c1: i2c@44e0b000 {
 			status = "disabled";
 		};
 
-		i2c2: i2c@4802a000 {
+		i2c1: i2c@4802a000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -205,7 +205,7 @@ i2c2: i2c@4802a000 {
 			status = "disabled";
 		};
 
-		i2c3: i2c@4819c000 {
+		i2c2: i2c@4819c000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;