Commit bad60e6f authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - PowerNV PCI hotplug support.
   - Lots more Power9 support.
   - eBPF JIT support on ppc64le.
   - Lots of cxl updates.
   - Boot code consolidation.

  Bug fixes:
   - Fix spin_unlock_wait() from Boqun Feng
   - Fix stack pointer corruption in __tm_recheckpoint() from Michael
     Neuling
   - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
   - mm: Ensure "special" zones are empty from Oliver O'Halloran
   - ftrace: Separate the heuristics for checking call sites from
     Michael Ellerman
   - modules: Never restore r2 for a mprofile-kernel style mcount() call
     from Michael Ellerman
   - Fix endianness when reading TCEs from Alexey Kardashevskiy
   - start rtasd before PCI probing from Greg Kurz
   - PCI: rpaphp: Fix slot registration for multiple slots under a PHB
     from Tyrel Datwyler
   - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev
     Bhattiprolu

  Cleanups & fixes:
   - Drop support for MPIC in pseries from Rashmica Gupta
   - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
   - Remove unused symbols in asm-offsets.c from Rashmica Gupta
   - Fix SRIOV not building without EEH enabled from Russell Currey
   - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann
   - Reduce log level of PCI I/O space warning from Benjamin
     Herrenschmidt
   - Add array bounds checking to crash_shutdown_handlers from Suraj
     Jitindar Singh
   - Avoid -maltivec when using clang integrated assembler from Anton
     Blanchard
   - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
   - Fix error return value in cmm_mem_going_offline() from Rasmus
     Villemoes
   - export cpu_to_core_id() from Mauricio Faria de Oliveira
   - Remove old symbols from defconfigs from Andrew Donnellan
   - Update obsolete comments in setup_32.c about entry conditions from
     Benjamin Herrenschmidt
   - Add comment explaining the purpose of setup_kdump_trampoline() from
     Benjamin Herrenschmidt
   - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin
     Hao
   - Remove RELOCATABLE_PPC32 from Kevin Hao
   - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh

  Minor cleanups & fixes:
   - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
     Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King,
     Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman,
     Michael Ellerman, Stephen Rothwell, Stewart Smith.

  Freescale updates from Scott:
   - "Highlights include more 8xx optimizations, device tree updates,
     and MVME7100 support."

  PowerNV PCI hotplug from Gavin Shan:
   - PCI: Add pcibios_setup_bridge()
   - Override pcibios_setup_bridge()
   - Remove PCI_RESET_DELAY_US
   - Move pnv_pci_ioda_setup_opal_tce_kill() around
   - Increase PE# capacity
   - Allocate PE# in reverse order
   - Create PEs in pcibios_setup_bridge()
   - Setup PE for root bus
   - Extend PCI bridge resources
   - Make pnv_ioda_deconfigure_pe() visible
   - Dynamically release PE
   - Update bridge windows on PCI plug
   - Delay populating pdn
   - Support PCI slot ID
   - Use PCI slot reset infrastructure
   - Introduce pnv_pci_get_slot_id()
   - Functions to get/set PCI slot state
   - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
   - Print correct PHB type names

  Power9 idle support from Shreyas B. Prabhu:
   - set power_save func after the idle states are initialized
   - Use PNV_THREAD_WINKLE macro while requesting for winkle
   - make hypervisor state restore a function
   - Rename idle_power7.S to idle_book3s.S
   - Rename reusable idle functions to hardware agnostic names
   - Make pnv_powersave_common more generic
   - abstraction for saving SPRs before entering deep idle states
   - Add platform support for stop instruction
   - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
   - cpuidle/powernv: cleanup cpuidle-powernv.c
   - cpuidle/powernv: Add support for POWER ISA v3 idle states
   - Use deepest stop state when cpu is offlined

  Power9 PMU from Madhavan Srinivasan:
   - factor out power8 pmu macros and defines
   - factor out power8 pmu functions
   - factor out power8 __init_pmu code
   - Add power9 event list macros for generic and cache events
   - Power9 PMU support
   - Export Power9 generic and cache events to sysfs

  Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
   - Add XICS emulation APIs
   - Move a few exception common handlers to make room
   - Add support for HV virtualization interrupts
   - Add mechanism to force a replay of interrupts
   - Add ICP OPAL backend
   - Discover IODA3 PHBs
   - pci: Remove obsolete SW invalidate
   - opal: Add real mode call wrappers
   - Rename TCE invalidation calls
   - Remove SWINV constants and obsolete TCE code
   - Rework accessing the TCE invalidate register
   - Fallback to OPAL for TCE invalidations
   - Use the device-tree to get available range of M64's
   - Check status of a PHB before using it
   - pci: Don't try to allocate resources that will be reassigned

  Other Power9:
   - Send SIGBUS on unaligned copy and paste from Chris Smart
   - Large Decrementer support from Oliver O'Halloran
   - Load Monitor Register Support from Jack Miller

  Performance improvements from Anton Blanchard:
   - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
   - Avoid load hit store in setup_sigcontext()
   - Remove assembly versions of strcpy, strcat, strlen and strcmp
   - Align hot loops of some string functions

  eBPF JIT from Naveen N. Rao:
   - Fix/enhance 32-bit Load Immediate implementation
   - Optimize 64-bit Immediate loads
   - Introduce rotate immediate instructions
   - A few cleanups
   - Isolate classic BPF JIT specifics into a separate header
   - Implement JIT compiler for extended BPF

  Operator Panel driver from Suraj Jitindar Singh:
   - devicetree/bindings: Add binding for operator panel on FSP machines
   - Add inline function to get rc from an ASYNC_COMP opal_msg
   - Add driver for operator panel on FSP machines

  Sparse fixes from Daniel Axtens:
   - make some things static
   - Introduce asm-prototypes.h
   - Include headers containing prototypes
   - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
   - kvm: Clarify __user annotations
   - Pass endianness to sparse
   - Make ppc_md.{halt, restart} __noreturn

  MM fixes & cleanups from Aneesh Kumar K.V:
   - radix: Update LPCR HR bit as per ISA
   - use _raw variant of page table accessors
   - Compile out radix related functions if RADIX_MMU is disabled
   - Clear top 16 bits of va only on older cpus
   - Print formation regarding the the MMU mode
   - hash: Update SDR1 size encoding as documented in ISA 3.0
   - radix: Update PID switch sequence
   - radix: Update machine call back to support new HCALL.
   - radix: Add LPID based tlb flush helpers
   - radix: Add a kernel command line to disable radix
   - Cleanup LPCR defines

  Boot code consolidation from Benjamin Herrenschmidt:
   - Move epapr_paravirt_early_init() to early_init_devtree()
   - cell: Don't use flat device-tree after boot
   - ge_imp3a: Don't use the flat device-tree after boot
   - mpc85xx_ds: Don't use the flat device-tree after boot
   - mpc85xx_rdb: Don't use the flat device-tree after boot
   - Don't test for machine type in rtas_initialize()
   - Don't test for machine type in smp_setup_cpu_maps()
   - dt: Add of_device_compatible_match()
   - Factor do_feature_fixup calls
   - Move 64-bit feature fixup earlier
   - Move 64-bit memory reserves to setup_arch()
   - Use a cachable DART
   - Move FW feature probing out of pseries probe()
   - Put exception configuration in a common place
   - Remove early allocation of the SMU command buffer
   - Move MMU backend selection out of platform code
   - pasemi: Remove IOBMAP allocation from platform probe()
   - mm/hash: Don't use machine_is() early during boot
   - Don't test for machine type to detect HEA special case
   - pmac: Remove spurrious machine type test
   - Move hash table ops to a separate structure
   - Ensure that ppc_md is empty before probing for machine type
   - Move 64-bit probe_machine() to later in the boot process
   - Move 32-bit probe() machine to later in the boot process
   - Get rid of ppc_md.init_early()
   - Move the boot time info banner to a separate function
   - Move setting of {i,d}cache_bsize to initialize_cache_info()
   - Move the content of setup_system() to setup_arch()
   - Move cache info inits to a separate function
   - Re-order the call to smp_setup_cpu_maps()
   - Re-order setup_panic()
   - Make a few boot functions __init
   - Merge 32-bit and 64-bit setup_arch()

  Other new features:
   - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
   - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
   - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
   - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
   - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
   - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
   - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
   - Add a parameter to disable 1TB segs from Oliver O'Halloran
   - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
   - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
   - pseries: Add pseries hotplug workqueue from John Allen
   - pseries: Add support for hotplug interrupt source from John Allen
   - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
   - pseries: Move property cloning into its own routine from Nathan Fontenot
   - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
   - pseries: Auto-online hotplugged memory from Nathan Fontenot
   - pseries: Remove call to memblock_add() from Nathan Fontenot

  cxl:
   - Add set and get private data to context struct from Michael Neuling
   - make base more explicitly non-modular from Paul Gortmaker
   - Use for_each_compatible_node() macro from Wei Yongjun
   - Frederic Barrat
   - Abstract the differences between the PSL and XSL
   - Make vPHB device node match adapter's
   - Philippe Bergheaud
   - Add mechanism for delivering AFU driver specific events
   - Ignore CAPI adapters misplaced in switched slots
   - Refine slice error debug messages
   - Andrew Donnellan
   - static-ify variables to fix sparse warnings
   - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
   - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
   - Add cxl_check_and_switch_mode() API to switch bi-modal cards
   - remove dead Kconfig options
   - fix potential NULL dereference in free_adapter()
   - Ian Munsie
   - Update process element after allocating interrupts
   - Add support for CAPP DMA mode
   - Fix allowing bogus AFU descriptors with 0 maximum processes
   - Fix allocating a minimum of 2 pages for the SPA
   - Fix bug where AFU disable operation had no effect
   - Workaround XSL bug that does not clear the RA bit after a reset
   - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
   - powerpc/powernv: Split cxl code out into a separate file
   - Add cxl_slot_is_supported API
   - Enable bus mastering for devices using CAPP DMA mode
   - Move cxl_afu_get / cxl_afu_put to base
   - Allow a default context to be associated with an external pci_dev
   - Do not create vPHB if there are no AFU configuration records
   - powerpc/powernv: Add support for the cxl kernel api on the real phb
   - Add support for using the kernel API with a real PHB
   - Add kernel APIs to get & set the max irqs per context
   - Add preliminary workaround for CX4 interrupt limitation
   - Add support for interrupts on the Mellanox CX4
   - Workaround PE=0 hardware limitation in Mellanox CX4
   - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n

  selftests:
   - Test unaligned copy and paste from Chris Smart
   - Load Monitor Register Tests from Jack Miller
   - Cyril Bur
   - exec() with suspended transaction
   - Use signed long to read perf_event_paranoid
   - Fix usage message in context_switch
   - Fix generation of vector instructions/types in context_switch
   - Michael Ellerman
   - Use "Delta" rather than "Error" in normal output
   - Import Anton's mmap & futex micro benchmarks
   - Add a test for PROT_SAO"

* tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits)
  powerpc/mm: Parenthesise IS_ENABLED() in if condition
  tty/hvc: Use opal irqchip interface if available
  tty/hvc: Use IRQF_SHARED for OPAL hvc consoles
  selftests/powerpc: exec() with suspended transaction
  powerpc: Improve comment explaining why we modify VRSAVE
  powerpc/mm: Drop unused externs for hpte_init_beat[_v3]()
  powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header
  powerpc/mm: Fix build break when PPC_NATIVE=n
  crypto: vmx - Convert to CPU feature based module autoloading
  powerpc: Add module autoloading based on CPU features
  powerpc/powernv/ioda: Fix endianness when reading TCEs
  powerpc/mm: Add memory barrier in __hugepte_alloc()
  powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call
  powerpc/ftrace: Separate the heuristics for checking call sites
  powerpc: Merge 32-bit and 64-bit setup_arch()
  powerpc/64: Make a few boot functions __init
  powerpc: Re-order setup_panic()
  powerpc: Re-order the call to smp_setup_cpu_maps()
  powerpc/32: Move cache info inits to a separate function
  powerpc/64: Move the content of setup_system() to setup_arch()
  ...
parents dd0f0cf5 719dbb2d
IBM OPAL Operator Panel Binding
-------------------------------
Required properties:
- compatible : Should be "ibm,opal-oppanel".
- #lines : Number of lines on the operator panel e.g. <0x2>.
- #length : Number of characters per line of the operator panel e.g. <0x10>.
Example:
oppanel {
compatible = "ibm,opal-oppanel";
#lines = <0x2>;
#length = <0x10>;
};
...@@ -2,7 +2,7 @@ IBM OPAL real-time clock ...@@ -2,7 +2,7 @@ IBM OPAL real-time clock
------------------------ ------------------------
Required properties: Required properties:
- comapatible: Should be "ibm,opal-rtc" - compatible: Should be "ibm,opal-rtc"
Optional properties: Optional properties:
- wakeup-source: Decides if the wakeup is supported or not - wakeup-source: Decides if the wakeup is supported or not
......
...@@ -41,3 +41,84 @@ Example: ...@@ -41,3 +41,84 @@ Example:
fsl,mdio-pin = <12>; fsl,mdio-pin = <12>;
fsl,mdc-pin = <13>; fsl,mdc-pin = <13>;
}; };
* HDLC
Currently defined compatibles:
- fsl,ucc-hdlc
Properties for fsl,ucc-hdlc:
- rx-clock-name
- tx-clock-name
Usage: required
Value type: <string>
Definition : Must be "brg1"-"brg16" for internal clock source,
Must be "clk1"-"clk24" for external clock source.
- fsl,tdm-interface
Usage: optional
Value type: <empty>
Definition : Specify that hdlc is based on tdm-interface
The property below is dependent on fsl,tdm-interface:
- fsl,rx-sync-clock
Usage: required
Value type: <string>
Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15".
- fsl,tx-sync-clock
Usage: required
Value type: <string>
Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15".
- fsl,tdm-framer-type
Usage: required for tdm interface
Value type: <string>
Definition : "e1" or "t1".Now e1 and t1 are used, other framer types
are not supported.
- fsl,tdm-id
Usage: required for tdm interface
Value type: <u32>
Definition : number of TDM ID
- fsl,tx-timeslot-mask
- fsl,rx-timeslot-mask
Usage: required for tdm interface
Value type: <u32>
Definition : time slot mask for TDM operation. Indicates which time
slots used for transmitting and receiving.
- fsl,siram-entry-id
Usage: required for tdm interface
Value type: <u32>
Definition : Must be 0,2,4...64. the number of TDM entry.
- fsl,tdm-internal-loopback
usage: optional for tdm interface
value type: <empty>
Definition : Internal loopback connecting on TDM layer.
Example for tdm interface:
ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk8";
tx-clock-name = "clk9";
fsl,rx-sync-clock = "rsync_pin";
fsl,tx-sync-clock = "tsync_pin";
fsl,tx-timeslot-mask = <0xfffffffe>;
fsl,rx-timeslot-mask = <0xfffffffe>;
fsl,tdm-framer-type = "e1";
fsl,tdm-id = <0>;
fsl,siram-entry-id = <0>;
fsl,tdm-interface;
};
Example for hdlc without tdm interface:
ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "brg1";
tx-clock-name = "brg1";
};
...@@ -69,6 +69,58 @@ Example: ...@@ -69,6 +69,58 @@ Example:
}; };
}; };
* Interrupt Controller (IC)
Required properties:
- compatible : should be "fsl,qe-ic".
- reg : Address range of IC register set.
- interrupts : interrupts generated by the device.
- interrupt-controller : this device is a interrupt controller.
Example:
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <95 2 0 0 94 2 0 0>;
};
* Serial Interface Block (SI)
The SI manages the routing of eight TDM lines to the QE block serial drivers
, the MCC and the UCCs, for receive and transmit.
Required properties:
- compatible : must be "fsl,<chip>-qe-si". For t1040, must contain
"fsl,t1040-qe-si".
- reg : Address range of SI register set.
Example:
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
* Serial Interface Block RAM(SIRAM)
store the routing entries of SI
Required properties:
- compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain
"fsl,t1040-qe-siram".
- reg : Address range of SI RAM.
Example:
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
* QE Firmware Node * QE Firmware Node
This node defines a firmware binary that is embedded in the device tree, for This node defines a firmware binary that is embedded in the device tree, for
......
* Serial
Required Properties:
compatible : must be "fsl,<chip>-ucc-uart". For t1040, must be
"fsl,t1040-ucc-uart".
port-number : port number of UCC-UART
tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source,
should be "clk1"-"clk28" for external clock source.
Example:
ucc_serial: ucc@2200 {
compatible = "fsl,t1040-ucc-uart";
port-number = <0>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
};
...@@ -931,9 +931,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ...@@ -931,9 +931,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
dhash_entries= [KNL] dhash_entries= [KNL]
Set number of hash buckets for dentry cache. Set number of hash buckets for dentry cache.
disable_1tb_segments [PPC]
Disables the use of 1TB hash page table segments. This
causes the kernel to fall back to 256MB segments which
can be useful when debugging issues that require an SLB
miss to occur.
disable= [IPV6] disable= [IPV6]
See Documentation/networking/ipv6.txt. See Documentation/networking/ipv6.txt.
disable_radix [PPC]
Disable RADIX MMU mode on POWER9
disable_cpu_apicid= [X86,APIC,SMP] disable_cpu_apicid= [X86,APIC,SMP]
Format: <int> Format: <int>
The number of initial APIC ID for the The number of initial APIC ID for the
......
...@@ -6948,6 +6948,7 @@ F: drivers/crypto/nx/ ...@@ -6948,6 +6948,7 @@ F: drivers/crypto/nx/
F: drivers/crypto/vmx/ F: drivers/crypto/vmx/
F: drivers/net/ethernet/ibm/ibmveth.* F: drivers/net/ethernet/ibm/ibmveth.*
F: drivers/net/ethernet/ibm/ibmvnic.* F: drivers/net/ethernet/ibm/ibmvnic.*
F: drivers/pci/hotplug/pnv_php.c
F: drivers/pci/hotplug/rpa* F: drivers/pci/hotplug/rpa*
F: drivers/scsi/ibmvscsi/ F: drivers/scsi/ibmvscsi/
N: opal N: opal
...@@ -9214,6 +9215,12 @@ F: drivers/firmware/psci.c ...@@ -9214,6 +9215,12 @@ F: drivers/firmware/psci.c
F: include/linux/psci.h F: include/linux/psci.h
F: include/uapi/linux/psci.h F: include/uapi/linux/psci.h
POWERNV OPERATOR PANEL LCD DISPLAY DRIVER
M: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
L: linuxppc-dev@lists.ozlabs.org
S: Maintained
F: drivers/char/powernv-op-panel.c
PNP SUPPORT PNP SUPPORT
M: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> M: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
S: Maintained S: Maintained
......
...@@ -127,7 +127,8 @@ config PPC ...@@ -127,7 +127,8 @@ config PPC
select IRQ_FORCED_THREADING select IRQ_FORCED_THREADING
select HAVE_RCU_TABLE_FREE if SMP select HAVE_RCU_TABLE_FREE if SMP
select HAVE_SYSCALL_TRACEPOINTS select HAVE_SYSCALL_TRACEPOINTS
select HAVE_CBPF_JIT if CPU_BIG_ENDIAN select HAVE_CBPF_JIT if !PPC64
select HAVE_EBPF_JIT if PPC64
select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_JUMP_LABEL
select ARCH_HAVE_NMI_SAFE_CMPXCHG select ARCH_HAVE_NMI_SAFE_CMPXCHG
select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_HAS_GCOV_PROFILE_ALL
...@@ -163,6 +164,8 @@ config PPC ...@@ -163,6 +164,8 @@ config PPC
select ARCH_HAS_UBSAN_SANITIZE_ALL select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS
select GENERIC_CPU_AUTOPROBE
select HAVE_VIRT_CPU_ACCOUNTING
config GENERIC_CSUM config GENERIC_CSUM
def_bool CPU_LITTLE_ENDIAN def_bool CPU_LITTLE_ENDIAN
...@@ -456,6 +459,29 @@ config KEXEC ...@@ -456,6 +459,29 @@ config KEXEC
interface is strongly in flux, so no good recommendation can be interface is strongly in flux, so no good recommendation can be
made. made.
config RELOCATABLE
bool "Build a relocatable kernel"
depends on (PPC64 && !COMPILE_TEST) || (FLATMEM && (44x || FSL_BOOKE))
select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running at the
location the kernel is loaded at. For ppc32, there is no any
alignment restrictions, and this feature is a superset of
DYNAMIC_MEMSTART and hence overrides it. For ppc64, we should use
16k-aligned base address. The kernel is linked as a
position-independent executable (PIE) and contains dynamic relocations
which are processed early in the bootup process.
One use is for the kexec on panic case where the recovery kernel
must live at a different physical address than the primary
kernel.
Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
it has been loaded at and the compile time physical addresses
CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
setting can still be useful to bootwrappers that need to know the
load address of the kernel (eg. u-boot/mkimage).
config CRASH_DUMP config CRASH_DUMP
bool "Build a kdump crash kernel" bool "Build a kdump crash kernel"
depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP) depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
...@@ -948,29 +974,6 @@ config DYNAMIC_MEMSTART ...@@ -948,29 +974,6 @@ config DYNAMIC_MEMSTART
This option is overridden by CONFIG_RELOCATABLE This option is overridden by CONFIG_RELOCATABLE
config RELOCATABLE
bool "Build a relocatable kernel"
depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE)
select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running at the
location the kernel is loaded at, without any alignment restrictions.
This feature is a superset of DYNAMIC_MEMSTART and hence overrides it.
One use is for the kexec on panic case where the recovery kernel
must live at a different physical address than the primary
kernel.
Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
it has been loaded at and the compile time physical addresses
CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
setting can still be useful to bootwrappers that need to know the
load address of the kernel (eg. u-boot/mkimage).
config RELOCATABLE_PPC32
def_bool y
depends on PPC32 && RELOCATABLE
config PAGE_OFFSET_BOOL config PAGE_OFFSET_BOOL
bool "Set custom page offset address" bool "Set custom page offset address"
depends on ADVANCED_OPTIONS depends on ADVANCED_OPTIONS
...@@ -1053,24 +1056,14 @@ config CONSISTENT_SIZE ...@@ -1053,24 +1056,14 @@ config CONSISTENT_SIZE
config PIN_TLB config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)" bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx depends on ADVANCED_OPTIONS && 8xx
config PIN_TLB_IMMR
bool "Pinned TLB for IMMR"
depends on PIN_TLB
default y
endmenu endmenu
if PPC64 if PPC64
config RELOCATABLE
bool "Build a relocatable kernel"
depends on !COMPILE_TEST
select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running anywhere
in the RMA (real memory area) at any 16k-aligned base address.
The kernel is linked as a position-independent executable (PIE)
and contains dynamic relocations which are processed early
in the bootup process.
One use is for the kexec on panic case where the recovery kernel
must live at a different physical address than the primary
kernel.
# This value must have zeroes in the bottom 60 bits otherwise lots will break # This value must have zeroes in the bottom 60 bits otherwise lots will break
config PAGE_OFFSET config PAGE_OFFSET
hex hex
......
...@@ -149,14 +149,14 @@ config PPC_EARLY_DEBUG_BOOTX ...@@ -149,14 +149,14 @@ config PPC_EARLY_DEBUG_BOOTX
config PPC_EARLY_DEBUG_LPAR config PPC_EARLY_DEBUG_LPAR
bool "LPAR HV Console" bool "LPAR HV Console"
depends on PPC_PSERIES depends on PPC_PSERIES && HVC_CONSOLE
help help
Select this to enable early debugging for a machine with a HVC Select this to enable early debugging for a machine with a HVC
console on vterm 0. console on vterm 0.
config PPC_EARLY_DEBUG_LPAR_HVSI config PPC_EARLY_DEBUG_LPAR_HVSI
bool "LPAR HVSI Console" bool "LPAR HVSI Console"
depends on PPC_PSERIES depends on PPC_PSERIES && HVC_CONSOLE
help help
Select this to enable early debugging for a machine with a HVSI Select this to enable early debugging for a machine with a HVSI
console on a specified vterm. console on a specified vterm.
...@@ -212,7 +212,6 @@ config PPC_EARLY_DEBUG_40x ...@@ -212,7 +212,6 @@ config PPC_EARLY_DEBUG_40x
config PPC_EARLY_DEBUG_CPM config PPC_EARLY_DEBUG_CPM
bool "Early serial debugging for Freescale CPM-based serial ports" bool "Early serial debugging for Freescale CPM-based serial ports"
depends on SERIAL_CPM depends on SERIAL_CPM
select PIN_TLB if PPC_8xx
help help
Select this to enable early debugging for Freescale chips Select this to enable early debugging for Freescale chips
using a CPM-based serial port. This assumes that the bootwrapper using a CPM-based serial port. This assumes that the bootwrapper
......
...@@ -181,6 +181,11 @@ KBUILD_CFLAGS += -pipe -Iarch/$(ARCH) $(CFLAGS-y) ...@@ -181,6 +181,11 @@ KBUILD_CFLAGS += -pipe -Iarch/$(ARCH) $(CFLAGS-y)
CPP = $(CC) -E $(KBUILD_CFLAGS) CPP = $(CC) -E $(KBUILD_CFLAGS)
CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__ CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
ifdef CONFIG_CPU_BIG_ENDIAN
CHECKFLAGS += -D__BIG_ENDIAN__
else
CHECKFLAGS += -D__LITTLE_ENDIAN__
endif
KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
...@@ -221,7 +226,7 @@ KBUILD_CFLAGS += -mno-sched-epilog ...@@ -221,7 +226,7 @@ KBUILD_CFLAGS += -mno-sched-epilog
endif endif
cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec cpu-as-$(CONFIG_ALTIVEC) += $(call as-option,-Wa$(comma)-maltivec)
cpu-as-$(CONFIG_E200) += -Wa,-me200 cpu-as-$(CONFIG_E200) += -Wa,-me200
KBUILD_AFLAGS += $(cpu-as-y) KBUILD_AFLAGS += $(cpu-as-y)
......
...@@ -70,7 +70,7 @@ $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o): \ ...@@ -70,7 +70,7 @@ $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o): \
libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
libfdtheader := fdt.h libfdt.h libfdt_internal.h libfdtheader := fdt.h libfdt.h libfdt_internal.h
$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \ $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o): \
$(addprefix $(obj)/,$(libfdtheader)) $(addprefix $(obj)/,$(libfdtheader))
src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
...@@ -78,7 +78,7 @@ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \ ...@@ -78,7 +78,7 @@ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \ ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c stdlib.c \ gunzip_util.c elf_util.c $(zlib) devtree.c stdlib.c \
oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \ oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \
uartlite.c mpc52xx-psc.c uartlite.c mpc52xx-psc.c opal.c opal-calls.S
src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c
...@@ -113,6 +113,7 @@ src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c ...@@ -113,6 +113,7 @@ src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
src-wlib := $(sort $(src-wlib-y)) src-wlib := $(sort $(src-wlib-y))
src-plat := $(sort $(src-plat-y)) src-plat := $(sort $(src-plat-y))
...@@ -296,6 +297,9 @@ image-$(CONFIG_TQM8560) += cuImage.tqm8560 ...@@ -296,6 +297,9 @@ image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548 image-$(CONFIG_SBC8548) += cuImage.sbc8548
image-$(CONFIG_KSI8560) += cuImage.ksi8560 image-$(CONFIG_KSI8560) += cuImage.ksi8560
# Board ports in arch/powerpc/platform/86xx/Kconfig
image-$(CONFIG_MVME7100) += dtbImage.mvme7100
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter image-$(CONFIG_STORCENTER) += cuImage.storcenter
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
......
...@@ -51,6 +51,7 @@ aliases { ...@@ -51,6 +51,7 @@ aliases {
serial2 = &serial2; serial2 = &serial2;
serial3 = &serial3; serial3 = &serial3;
pci0 = &pci0; pci0 = &pci0;
usb0 = &usb0;
dma0 = &dma0; dma0 = &dma0;
dma1 = &dma1; dma1 = &dma1;
sdhc = &sdhc; sdhc = &sdhc;
......
...@@ -51,6 +51,7 @@ aliases { ...@@ -51,6 +51,7 @@ aliases {
serial2 = &serial2; serial2 = &serial2;
serial3 = &serial3; serial3 = &serial3;
pci0 = &pci0; pci0 = &pci0;
usb0 = &usb0;
dma0 = &dma0; dma0 = &dma0;
dma1 = &dma1; dma1 = &dma1;
sdhc = &sdhc; sdhc = &sdhc;
......
...@@ -106,6 +106,43 @@ sata@220000 { ...@@ -106,6 +106,43 @@ sata@220000 {
sata@221000 { sata@221000 {
status = "disabled"; status = "disabled";
}; };
fman0: fman@400000 {
enet0: ethernet@e0000 {
phy-connection-type = "sgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
mdio0: mdio@e1120 {
front_phy: ethernet-phy@11 {
reg = <0x11>;
};
};
enet1: ethernet@e2000 {
phy-connection-type = "sgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
enet2: ethernet@e4000 {
status = "disabled";
};
enet3: ethernet@e6000 {
status = "disabled";
};
enet4: ethernet@e8000 {
phy-handle = <&front_phy>;
phy-connection-type = "rgmii";
};
enet5: ethernet@f0000 {
status = "disabled";
};
};
}; };
rio: rapidio@ffe0c0000 { rio: rapidio@ffe0c0000 {
......
/*
* Device tree source for the Emerson/Artesyn MVME7100
*
* Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
*
* Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
/include/ "mpc8641si-pre.dtsi"
/ {
model = "MVME7100";
compatible = "artesyn,MVME7100";
memory {
device_type = "memory";
reg = <0x00000000 0x80000000>;
};
soc: soc@f1000000 {
ranges = <0x00000000 0xf1000000 0x00100000>;
i2c@3000 {
hwmon@4c {
compatible = "dallas,max6649";
reg = <0x4c>;
};
rtc@68 {
status = "disabled";
};
};
enet0: ethernet@24000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
mdio@24520 {
phy0: ethernet-phy@1 {
reg = <1>;
};
phy1: ethernet-phy@2 {
reg = <2>;
};
phy2: ethernet-phy@3 {
reg = <3>;
};
phy3: ethernet-phy@4 {
reg = <4>;
};
};
enet1: ethernet@25000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
mdio@25520 {
status = "disabled";
};
enet2: ethernet@26000 {
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
mdio@26520 {
status = "disabled";
};
enet3: ethernet@27000 {
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};
mdio@27520 {
status = "disabled";
};
serial1: serial@4600 {
status = "disabled";
};
};
lbc: localbus@f1005000 {
reg = <0xf1005000 0x1000>;
ranges = <0 0 0xf8000000 0x08000000 // NOR Flash (128MB)
2 0 0xf2030000 0x00010000 // NAND Flash (8GB)
3 0 0xf2400000 0x00080000 // MRAM (512KB)
4 0 0xf2000000 0x00010000 // BCSR
5 0 0xf2010000 0x00010000>; // QUART
bcsr@4,0 {
compatible = "artesyn,mvme7100-bcsr";
reg = <4 0 0x10000>;
};
serial@5,1000 {
device_type = "serial";
compatible = "ns16550";
reg = <5 0x1000 0x100>;
clock-frequency = <1843200>;
interrupts = <11 1 0 0>;
};
serial@5,2000 {
device_type = "serial";
compatible = "ns16550";
reg = <5 0x2000 0x100>;
clock-frequency = <1843200>;
interrupts = <11 1 0 0>;
};
serial@5,3000 {
device_type = "serial";
compatible = "ns16550";
reg = <5 0x3000 0x100>;
clock-frequency = <1843200>;
interrupts = <11 1 0 0>;
};
serial@5,4000 {
device_type = "serial";
compatible = "ns16550";
reg = <5 0x4000 0x100>;
clock-frequency = <1843200>;
interrupts = <11 1 0 0>;
};
};
pci0: pcie@f1008000 {
status = "disabled";
};
pci1: pcie@f1009000 {
status = "disabled";
};
chosen {
linux,stdout-path = &serial0;
};
};
/include/ "mpc8641si-post.dtsi"
...@@ -32,7 +32,7 @@ ...@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/ */
usb@210000 { usb0: usb@210000 {
compatible = "fsl-usb2-dr"; compatible = "fsl-usb2-dr";
reg = <0x210000 0x1000>; reg = <0x210000 0x1000>;
#address-cells = <1>; #address-cells = <1>;
......
...@@ -607,7 +607,7 @@ sdhc@114000 { ...@@ -607,7 +607,7 @@ sdhc@114000 {
/include/ "qoriq-gpio-3.dtsi" /include/ "qoriq-gpio-3.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 { usb0: usb@210000 {
compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph"; compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
fsl,iommu-parent = <&pamu0>; fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
phy_type = "utmi"; phy_type = "utmi";
...@@ -615,7 +615,7 @@ usb0: usb@210000 { ...@@ -615,7 +615,7 @@ usb0: usb@210000 {
}; };
/include/ "qoriq-usb2-dr-0.dtsi" /include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 { usb1: usb@211000 {
compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
fsl,iommu-parent = <&pamu0>; fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
dr_mode = "host"; dr_mode = "host";
...@@ -673,3 +673,48 @@ mdio@fd000 { ...@@ -673,3 +673,48 @@ mdio@fd000 {
}; };
}; };
}; };
&qe {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
fsl,qe-num-riscs = <1>;
fsl,qe-num-snums = <28>;
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
};
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
ucc@2200 {
cell-index = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x6000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x6000>;
};
};
};
...@@ -212,4 +212,42 @@ pcie@0 { ...@@ -212,4 +212,42 @@ pcie@0 {
0 0x00010000>; 0 0x00010000>;
}; };
}; };
qe: qe@ffe140000 {
ranges = <0x0 0xf 0xfe140000 0x40000>;
reg = <0xf 0xfe140000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
ucc_hdlc: ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk8";
tx-clock-name = "clk9";
fsl,rx-sync-clock = "rsync_pin";
fsl,tx-sync-clock = "tsync_pin";
fsl,tx-timeslot-mask = <0xfffffffe>;
fsl,rx-timeslot-mask = <0xfffffffe>;
fsl,tdm-framer-type = "e1";
fsl,tdm-id = <0>;
fsl,siram-entry-id = <0>;
fsl,tdm-interface;
};
ucc_serial: ucc@2200 {
compatible = "fsl,t1040-ucc-uart";
port-number = <0>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
};
};
}; };
...@@ -366,4 +366,42 @@ pcie@0 { ...@@ -366,4 +366,42 @@ pcie@0 {
0 0x00010000>; 0 0x00010000>;
}; };
}; };
qe: qe@ffe140000 {
ranges = <0x0 0xf 0xfe140000 0x40000>;
reg = <0xf 0xfe140000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
ucc_hdlc: ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk8";
tx-clock-name = "clk9";
fsl,rx-sync-clock = "rsync_pin";
fsl,tx-sync-clock = "tsync_pin";
fsl,tx-timeslot-mask = <0xfffffffe>;
fsl,rx-timeslot-mask = <0xfffffffe>;
fsl,tdm-framer-type = "e1";
fsl,tdm-id = <0>;
fsl,siram-entry-id = <0>;
fsl,tdm-interface;
};
ucc_serial: ucc@2200 {
compatible = "fsl,t1040-ucc-uart";
port-number = <0>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
};
};
}; };
...@@ -222,4 +222,42 @@ pcie@0 { ...@@ -222,4 +222,42 @@ pcie@0 {
0 0x00010000>; 0 0x00010000>;
}; };
}; };
qe: qe@ffe140000 {
ranges = <0x0 0xf 0xfe140000 0x40000>;
reg = <0xf 0xfe140000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
ucc_hdlc: ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk8";
tx-clock-name = "clk9";
fsl,rx-sync-clock = "rsync_pin";
fsl,tx-sync-clock = "tsync_pin";
fsl,tx-timeslot-mask = <0xfffffffe>;
fsl,rx-timeslot-mask = <0xfffffffe>;
fsl,tdm-framer-type = "e1";
fsl,tdm-id = <0>;
fsl,siram-entry-id = <0>;
fsl,tdm-interface;
};
ucc_serial: ucc@2200 {
compatible = "fsl,t1040-ucc-uart";
port-number = <0>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
};
};
}; };
...@@ -56,6 +56,8 @@ aliases { ...@@ -56,6 +56,8 @@ aliases {
pci1 = &pci1; pci1 = &pci1;
pci2 = &pci2; pci2 = &pci2;
pci3 = &pci3; pci3 = &pci3;
usb0 = &usb0;
usb1 = &usb1;
dma0 = &dma0; dma0 = &dma0;
dma1 = &dma1; dma1 = &dma1;
dma2 = &dma2; dma2 = &dma2;
......
#include "ppc_asm.h"
.text
.globl _zimage_start
_zimage_start:
mfmsr r10
rlwinm r10,r10,0,~(1<<15) /* Clear MSR_EE */
sync
mtmsr r10
isync
b _zimage_start_lib
/*
* Motload compatibility for the Emerson/Artesyn MVME7100
*
* Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
*
* Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include "ops.h"
#include "stdio.h"
#include "cuboot.h"
#define TARGET_86xx
#define TARGET_HAS_ETH1
#define TARGET_HAS_ETH2
#define TARGET_HAS_ETH3
#include "ppcboot.h"
static bd_t bd;
BSS_STACK(16384);
static void mvme7100_fixups(void)
{
void *devp;
unsigned long busfreq = bd.bi_busfreq * 1000000;
dt_fixup_cpu_clocks(bd.bi_intfreq * 1000000, busfreq / 4, busfreq);
devp = finddevice("/soc@f1000000");
if (devp)
setprop(devp, "bus-frequency", &busfreq, sizeof(busfreq));
devp = finddevice("/soc/serial@4500");
if (devp)
setprop(devp, "clock-frequency", &busfreq, sizeof(busfreq));
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr);
dt_fixup_mac_address_by_alias("ethernet3", bd.bi_enet3addr);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
CUBOOT_INIT();
fdt_init(_dtb_start);
serial_console_init();
platform_ops.fixups = mvme7100_fixups;
}
/*
* Copyright (c) 2016 IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "ppc_asm.h"
#include "../include/asm/opal-api.h"
.text
#define OPAL_CALL(name, token) \
.globl name; \
name: \
li r0, token; \
b opal_call;
opal_call:
mflr r11
std r11,16(r1)
mfcr r12
stw r12,8(r1)
mr r13,r2
/* Set opal return address */
ld r11,opal_return@got(r2)
mtlr r11
mfmsr r12
/* switch to BE when we enter OPAL */
li r11,MSR_LE
andc r12,r12,r11
mtspr SPRN_HSRR1,r12
/* load the opal call entry point and base */
ld r11,opal@got(r2)
ld r12,8(r11)
ld r2,0(r11)
mtspr SPRN_HSRR0,r12
hrfid
opal_return:
FIXUP_ENDIAN
mr r2,r13;
lwz r11,8(r1);
ld r12,16(r1)
mtcr r11;
mtlr r12
blr
OPAL_CALL(opal_console_write, OPAL_CONSOLE_WRITE);
OPAL_CALL(opal_console_read, OPAL_CONSOLE_READ);
OPAL_CALL(opal_console_write_buffer_space, OPAL_CONSOLE_WRITE_BUFFER_SPACE);
OPAL_CALL(opal_poll_events, OPAL_POLL_EVENTS);
OPAL_CALL(opal_console_flush, OPAL_CONSOLE_FLUSH);
/*
* Copyright (c) 2016 IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include "ops.h"
#include "stdio.h"
#include "io.h"
#include <libfdt.h>
#include "../include/asm/opal-api.h"
#ifdef __powerpc64__
/* Global OPAL struct used by opal-call.S */
struct opal {
u64 base;
u64 entry;
} opal;
static u32 opal_con_id;
int64_t opal_console_write(int64_t term_number, u64 *length, const u8 *buffer);
int64_t opal_console_read(int64_t term_number, uint64_t *length, u8 *buffer);
int64_t opal_console_write_buffer_space(uint64_t term_number, uint64_t *length);
int64_t opal_console_flush(uint64_t term_number);
int64_t opal_poll_events(uint64_t *outstanding_event_mask);
static int opal_con_open(void)
{
return 0;
}
static void opal_con_putc(unsigned char c)
{
int64_t rc;
uint64_t olen, len;
do {
rc = opal_console_write_buffer_space(opal_con_id, &olen);
len = be64_to_cpu(olen);
if (rc)
return;
opal_poll_events(NULL);
} while (len < 1);
olen = cpu_to_be64(1);
opal_console_write(opal_con_id, &olen, &c);
}
static void opal_con_close(void)
{
opal_console_flush(opal_con_id);
}
static void opal_init(void)
{
void *opal_node;
opal_node = finddevice("/ibm,opal");
if (!opal_node)
return;
if (getprop(opal_node, "opal-base-address", &opal.base, sizeof(u64)) < 0)
return;
opal.base = be64_to_cpu(opal.base);
if (getprop(opal_node, "opal-entry-address", &opal.entry, sizeof(u64)) < 0)
return;
opal.entry = be64_to_cpu(opal.entry);
}
int opal_console_init(void *devp, struct serial_console_data *scdp)
{
opal_init();
if (devp) {
int n = getprop(devp, "reg", &opal_con_id, sizeof(u32));
if (n != sizeof(u32))
return -1;
opal_con_id = be32_to_cpu(opal_con_id);
} else
opal_con_id = 0;
scdp->open = opal_con_open;
scdp->putc = opal_con_putc;
scdp->close = opal_con_close;
return 0;
}
#else
int opal_console_init(void *devp, struct serial_console_data *scdp)
{
return -1;
}
#endif /* __powerpc64__ */
...@@ -89,6 +89,7 @@ int mpsc_console_init(void *devp, struct serial_console_data *scdp); ...@@ -89,6 +89,7 @@ int mpsc_console_init(void *devp, struct serial_console_data *scdp);
int cpm_console_init(void *devp, struct serial_console_data *scdp); int cpm_console_init(void *devp, struct serial_console_data *scdp);
int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp); int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp);
int uartlite_console_init(void *devp, struct serial_console_data *scdp); int uartlite_console_init(void *devp, struct serial_console_data *scdp);
int opal_console_init(void *devp, struct serial_console_data *scdp);
void *simple_alloc_init(char *base, unsigned long heap_size, void *simple_alloc_init(char *base, unsigned long heap_size,
unsigned long granularity, unsigned long max_allocs); unsigned long granularity, unsigned long max_allocs);
extern void flush_cache(void *, unsigned long); extern void flush_cache(void *, unsigned long);
......
...@@ -61,6 +61,10 @@ ...@@ -61,6 +61,10 @@
#define SPRN_TBRL 268 #define SPRN_TBRL 268
#define SPRN_TBRU 269 #define SPRN_TBRU 269
#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */
#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
#define MSR_LE 0x0000000000000001
#define FIXUP_ENDIAN \ #define FIXUP_ENDIAN \
tdi 0, 0, 0x48; /* Reverse endian of b . + 8 */ \ tdi 0, 0, 0x48; /* Reverse endian of b . + 8 */ \
......
...@@ -43,7 +43,7 @@ typedef struct bd_info { ...@@ -43,7 +43,7 @@ typedef struct bd_info {
unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */
#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ #if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
defined(TARGET_83xx) defined(TARGET_83xx) || defined(TARGET_86xx)
unsigned long bi_immr_base; /* base of IMMR register */ unsigned long bi_immr_base; /* base of IMMR register */
#endif #endif
#if defined(TARGET_PPC_MPC52xx) #if defined(TARGET_PPC_MPC52xx)
......
...@@ -132,6 +132,8 @@ int serial_console_init(void) ...@@ -132,6 +132,8 @@ int serial_console_init(void)
else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") || else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") ||
dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a")) dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a"))
rc = uartlite_console_init(devp, &serial_cd); rc = uartlite_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "ibm,opal-console-raw"))
rc = opal_console_init(devp, &serial_cd);
/* Add other serial console driver calls here */ /* Add other serial console driver calls here */
......
...@@ -12,6 +12,16 @@ typedef short s16; ...@@ -12,6 +12,16 @@ typedef short s16;
typedef int s32; typedef int s32;
typedef long long s64; typedef long long s64;
/* required for opal-api.h */
typedef u8 uint8_t;
typedef u16 uint16_t;
typedef u32 uint32_t;
typedef u64 uint64_t;
typedef s8 int8_t;
typedef s16 int16_t;
typedef s32 int32_t;
typedef s64 int64_t;
#define min(x,y) ({ \ #define min(x,y) ({ \
typeof(x) _x = (x); \ typeof(x) _x = (x); \
typeof(y) _y = (y); \ typeof(y) _y = (y); \
......
...@@ -302,6 +302,11 @@ mvme5100) ...@@ -302,6 +302,11 @@ mvme5100)
platformo="$object/fixed-head.o $object/mvme5100.o" platformo="$object/fixed-head.o $object/mvme5100.o"
binary=y binary=y
;; ;;
mvme7100)
platformo="$object/motload-head.o $object/mvme7100.o"
link_address='0x4000000'
binary=y
;;
esac esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext" vmz="$tmpdir/`basename \"$kernel\"`.$ext"
......
...@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -20,7 +20,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -20,7 +20,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -32,8 +32,6 @@ CONFIG_SCSI_SAS_ATTRS=y ...@@ -32,8 +32,6 @@ CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_USB_SUPPORT is not set # CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT4_FS=y CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
...@@ -44,7 +42,6 @@ CONFIG_NLS_CODEPAGE_437=y ...@@ -44,7 +42,6 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y CONFIG_NLS_UTF8=y
CONFIG_AVERAGE=y
CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_BUGVERBOSE is not set
......
...@@ -20,7 +20,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -20,7 +20,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -27,7 +27,6 @@ CONFIG_IP_MULTICAST=y ...@@ -27,7 +27,6 @@ CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
CONFIG_NETFILTER=y CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_FILTER=m
......
...@@ -18,7 +18,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -18,7 +18,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -32,7 +32,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -32,7 +32,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS=y
...@@ -110,10 +109,9 @@ CONFIG_MMC=y ...@@ -110,10 +109,9 @@ CONFIG_MMC=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_DNOTIFY is not set # CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set # CONFIG_INOTIFY_USER is not set
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
......
...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -49,7 +49,7 @@ CONFIG_SENSORS_AD7414=y ...@@ -49,7 +49,7 @@ CONFIG_SENSORS_AD7414=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_CRAMFS=y CONFIG_CRAMFS=y
......
...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -30,7 +30,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -30,7 +30,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS=y
...@@ -71,10 +70,9 @@ CONFIG_USB_OHCI_HCD=y ...@@ -71,10 +70,9 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_CRAMFS=y CONFIG_CRAMFS=y
......
...@@ -19,7 +19,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -19,7 +19,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
...@@ -43,7 +42,6 @@ CONFIG_BLK_DEV_SD=y ...@@ -43,7 +42,6 @@ CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SG=y
CONFIG_FUSION=y CONFIG_FUSION=y
CONFIG_FUSION_SAS=y CONFIG_FUSION_SAS=y
CONFIG_I2O=y
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
CONFIG_IBM_EMAC=y CONFIG_IBM_EMAC=y
CONFIG_IBM_EMAC_RXB=256 CONFIG_IBM_EMAC_RXB=256
......
...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
...@@ -76,8 +75,7 @@ CONFIG_LOGO=y ...@@ -76,8 +75,7 @@ CONFIG_LOGO=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1307=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
......
...@@ -32,7 +32,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -32,7 +32,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
...@@ -56,10 +55,9 @@ CONFIG_SERIAL_OF_PLATFORM=y ...@@ -56,10 +55,9 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_THERMAL=y CONFIG_THERMAL=y
# CONFIG_USB_SUPPORT is not set # CONFIG_USB_SUPPORT is not set
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_CRAMFS=y CONFIG_CRAMFS=y
......
...@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -22,7 +22,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -22,7 +22,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
...@@ -41,7 +40,6 @@ CONFIG_BLK_DEV_SD=y ...@@ -41,7 +40,6 @@ CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SG=y
CONFIG_FUSION=y CONFIG_FUSION=y
CONFIG_FUSION_SAS=y CONFIG_FUSION_SAS=y
CONFIG_I2O=y
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
CONFIG_IBM_EMAC=y CONFIG_IBM_EMAC=y
CONFIG_IBM_EMAC_RXB=256 CONFIG_IBM_EMAC_RXB=256
......
...@@ -26,7 +26,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -26,7 +26,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
...@@ -85,9 +84,8 @@ CONFIG_RTC_DRV_M41T80_WDT=y ...@@ -85,9 +84,8 @@ CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_REISERFS_FS=y CONFIG_REISERFS_FS=y
CONFIG_AUTOFS4_FS=y CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y CONFIG_ISO9660_FS=y
......
...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y CONFIG_CONNECTOR=y
......
...@@ -26,7 +26,6 @@ CONFIG_IP_MULTICAST=y ...@@ -26,7 +26,6 @@ CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
CONFIG_NETFILTER=y CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_FILTER=m
......
...@@ -23,7 +23,6 @@ CONFIG_UNIX=y ...@@ -23,7 +23,6 @@ CONFIG_UNIX=y
CONFIG_INET=y CONFIG_INET=y
CONFIG_IP_PNP=y CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_NETFILTER=y CONFIG_NETFILTER=y
CONFIG_VLAN_8021Q=y CONFIG_VLAN_8021Q=y
...@@ -73,9 +72,7 @@ CONFIG_LEDS_GPIO=y ...@@ -73,9 +72,7 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_MSDOS_FS=y CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
......
...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y ...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -61,8 +60,7 @@ CONFIG_USB_STORAGE=y ...@@ -61,8 +60,7 @@ CONFIG_USB_STORAGE=y
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_MSDOS_FS=y CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
......
...@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y ...@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -53,8 +52,7 @@ CONFIG_I2C_MPC=y ...@@ -53,8 +52,7 @@ CONFIG_I2C_MPC=y
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y ...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -73,8 +72,7 @@ CONFIG_RTC_DRV_DS1307=y ...@@ -73,8 +72,7 @@ CONFIG_RTC_DRV_DS1307=y
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_MSDOS_FS=y CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
......
...@@ -34,7 +34,6 @@ CONFIG_IP_PNP_BOOTP=y ...@@ -34,7 +34,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set # CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
...@@ -74,8 +73,7 @@ CONFIG_RTC_DRV_PCF8563=m ...@@ -74,8 +73,7 @@ CONFIG_RTC_DRV_PCF8563=m
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=m CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m CONFIG_EXT4_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_DNOTIFY is not set # CONFIG_DNOTIFY is not set
CONFIG_VFAT_FS=m CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850 CONFIG_FAT_DEFAULT_CODEPAGE=850
......
...@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y ...@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -75,8 +74,7 @@ CONFIG_RTC_DRV_DS1374=y ...@@ -75,8 +74,7 @@ CONFIG_RTC_DRV_DS1374=y
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_MSDOS_FS=y CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
......
...@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y ...@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -63,8 +62,7 @@ CONFIG_USB_EHCI_FSL=y ...@@ -63,8 +62,7 @@ CONFIG_USB_EHCI_FSL=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS1374=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS=y
......
...@@ -28,7 +28,6 @@ CONFIG_IP_PNP=y ...@@ -28,7 +28,6 @@ CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_TIPC=y CONFIG_TIPC=y
CONFIG_BRIDGE=m CONFIG_BRIDGE=m
......
...@@ -23,7 +23,6 @@ CONFIG_IP_PNP=y ...@@ -23,7 +23,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -79,8 +78,7 @@ CONFIG_RTC_CLASS=y ...@@ -79,8 +78,7 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1307=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS=y
......
...@@ -23,7 +23,6 @@ CONFIG_IP_PNP=y ...@@ -23,7 +23,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -77,8 +76,7 @@ CONFIG_RTC_CLASS=y ...@@ -77,8 +76,7 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1307=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS=y
......
...@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y ...@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -52,8 +51,7 @@ CONFIG_WATCHDOG=y ...@@ -52,8 +51,7 @@ CONFIG_WATCHDOG=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS1374=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y ...@@ -26,7 +26,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -64,8 +63,7 @@ CONFIG_USB_STORAGE=y ...@@ -64,8 +63,7 @@ CONFIG_USB_STORAGE=y
CONFIG_MMC=y CONFIG_MMC=y
CONFIG_MMC_SPI=y CONFIG_MMC_SPI=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_MSDOS_FS=y CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
......
...@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y ...@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -75,8 +74,7 @@ CONFIG_RTC_CLASS=y ...@@ -75,8 +74,7 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1307=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_MSDOS_FS=y CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
......
...@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y ...@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -66,8 +65,7 @@ CONFIG_RTC_CLASS=y ...@@ -66,8 +65,7 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1307=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_MSDOS_FS=y CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
......
...@@ -25,7 +25,6 @@ CONFIG_IP_PNP=y ...@@ -25,7 +25,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -51,8 +50,7 @@ CONFIG_WATCHDOG=y ...@@ -51,8 +50,7 @@ CONFIG_WATCHDOG=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS1374=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -25,7 +25,6 @@ CONFIG_IP_PNP=y ...@@ -25,7 +25,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -57,8 +56,7 @@ CONFIG_WATCHDOG=y ...@@ -57,8 +56,7 @@ CONFIG_WATCHDOG=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS1374=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y ...@@ -24,7 +24,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y CONFIG_MTD=y
...@@ -65,8 +64,7 @@ CONFIG_LOGO=y ...@@ -65,8 +64,7 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_USB_SUPPORT is not set # CONFIG_USB_SUPPORT is not set
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS=y
......
...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y ...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -50,8 +49,7 @@ CONFIG_I2C_CHARDEV=y ...@@ -50,8 +49,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y CONFIG_I2C_MPC=y
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -24,7 +24,6 @@ CONFIG_SYN_COOKIES=y ...@@ -24,7 +24,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -77,8 +76,7 @@ CONFIG_USB_MON=y ...@@ -77,8 +76,7 @@ CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_FSL=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y ...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -65,9 +64,7 @@ CONFIG_USB_EHCI_HCD=y ...@@ -65,9 +64,7 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -165,10 +165,8 @@ CONFIG_FSL_DMA=y ...@@ -165,10 +165,8 @@ CONFIG_FSL_DMA=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT4_FS=y CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_FUSE_FS=y CONFIG_FUSE_FS=y
CONFIG_ISO9660_FS=y CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y CONFIG_JOLIET=y
......
...@@ -64,7 +64,6 @@ CONFIG_IP_PIMSM_V2=y ...@@ -64,7 +64,6 @@ CONFIG_IP_PIMSM_V2=y
CONFIG_INET_AH=y CONFIG_INET_AH=y
CONFIG_INET_ESP=y CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y CONFIG_INET_IPCOMP=y
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y CONFIG_IPV6=y
CONFIG_IP_SCTP=m CONFIG_IP_SCTP=m
CONFIG_TIPC=y CONFIG_TIPC=y
...@@ -189,7 +188,7 @@ CONFIG_RTC_DRV_DS3232=y ...@@ -189,7 +188,7 @@ CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_CMOS=y
CONFIG_UIO=y CONFIG_UIO=y
CONFIG_STAGING=y CONFIG_STAGING=y
CONFIG_CLK_PPC_CORENET=y CONFIG_CLK_QORIQ=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_NTFS_FS=y CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
......
...@@ -21,7 +21,6 @@ CONFIG_IP_PNP=y ...@@ -21,7 +21,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -49,8 +48,7 @@ CONFIG_SERIAL_CPM=y ...@@ -49,8 +48,7 @@ CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y ...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -41,8 +40,7 @@ CONFIG_SERIAL_8250_CONSOLE=y ...@@ -41,8 +40,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set # CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -21,7 +21,6 @@ CONFIG_IP_PNP=y ...@@ -21,7 +21,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -44,8 +43,7 @@ CONFIG_SERIAL_CPM=y ...@@ -44,8 +43,7 @@ CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -23,7 +23,6 @@ CONFIG_IP_PNP=y ...@@ -23,7 +23,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
...@@ -46,8 +45,7 @@ CONFIG_SERIAL_8250_CONSOLE=y ...@@ -46,8 +45,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set # CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
......
...@@ -20,7 +20,6 @@ CONFIG_IP_PNP=y ...@@ -20,7 +20,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
......
...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y ...@@ -22,7 +22,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_CAN=y CONFIG_CAN=y
CONFIG_MTD=y CONFIG_MTD=y
...@@ -79,8 +78,7 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y ...@@ -79,8 +78,7 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS=y
......
...@@ -17,7 +17,6 @@ CONFIG_UNIX=y ...@@ -17,7 +17,6 @@ CONFIG_UNIX=y
CONFIG_INET=y CONFIG_INET=y
CONFIG_IP_PNP=y CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_NETFILTER=y CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_IPTABLES=m
...@@ -53,8 +52,7 @@ CONFIG_AGP=m ...@@ -53,8 +52,7 @@ CONFIG_AGP=m
CONFIG_DRM=m CONFIG_DRM=m
CONFIG_SOUND=m CONFIG_SOUND=m
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_AUTOFS4_FS=y CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=m CONFIG_ISO9660_FS=m
CONFIG_UDF_FS=m CONFIG_UDF_FS=m
......
...@@ -20,7 +20,6 @@ CONFIG_IP_PNP=y ...@@ -20,7 +20,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_MTD=y CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y
...@@ -50,8 +49,7 @@ CONFIG_I2C_MPC=y ...@@ -50,8 +49,7 @@ CONFIG_I2C_MPC=y
CONFIG_HWMON_DEBUG_CHIP=y CONFIG_HWMON_DEBUG_CHIP=y
CONFIG_SENSORS_LM75=y CONFIG_SENSORS_LM75=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS=y
......
...@@ -20,7 +20,6 @@ CONFIG_IP_PNP=y ...@@ -20,7 +20,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_MTD=y CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y
...@@ -52,8 +51,7 @@ CONFIG_I2C_MPC=y ...@@ -52,8 +51,7 @@ CONFIG_I2C_MPC=y
CONFIG_HWMON_DEBUG_CHIP=y CONFIG_HWMON_DEBUG_CHIP=y
CONFIG_SENSORS_LM75=y CONFIG_SENSORS_LM75=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS=y
......
...@@ -28,7 +28,6 @@ CONFIG_IP_PNP=y ...@@ -28,7 +28,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment