Commit bb03ed21 authored by Takashi Iwai's avatar Takashi Iwai

ALSA: hda - Update BCLK also at hotplug for i915 HSW/BDW

The recent bug report suggests that BCLK setup for i915 HSW/BDW needs
to be updated at each HDMI hotplug, not only at initialization and
resume.  That is, we need to update HSW_EM4 and HSW_EM5 registers at
ELD notification, too.  Otherwise the HDMI audio may be out of sync
and played in a wrong pitch.

However, the HDA codec driver has no access to the controller
registers, and currently the code managing these registers is in
hda_intel.c, i.e. local to the controller driver.  For allowing the
explicit BCLK update from the codec driver, as in this patch, the
former haswell_set_bclk() in hda_intel.c is moved to hdac_i915.c and
exposed as snd_hdac_i915_set_bclk().  This is called from both the HDA
controller driver and intel_pin_eld_notify() in HDMI codec driver.

Along with this change, snd_hdac_get_display_clk() gets dropped as
it's no longer used.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91410
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 037e1197
......@@ -9,7 +9,7 @@
#ifdef CONFIG_SND_HDA_I915
int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable);
int snd_hdac_display_power(struct hdac_bus *bus, bool enable);
int snd_hdac_get_display_clk(struct hdac_bus *bus);
void snd_hdac_i915_set_bclk(struct hdac_bus *bus);
int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid, int rate);
int snd_hdac_acomp_get_eld(struct hdac_bus *bus, hda_nid_t nid,
bool *audio_enabled, char *buffer, int max_bytes);
......@@ -25,9 +25,8 @@ static inline int snd_hdac_display_power(struct hdac_bus *bus, bool enable)
{
return 0;
}
static inline int snd_hdac_get_display_clk(struct hdac_bus *bus)
static inline void snd_hdac_i915_set_bclk(struct hdac_bus *bus)
{
return 0;
}
static inline int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid,
int rate)
......
......@@ -20,6 +20,7 @@
#include <sound/core.h>
#include <sound/hdaudio.h>
#include <sound/hda_i915.h>
#include <sound/hda_register.h>
static struct i915_audio_component *hdac_acomp;
......@@ -97,26 +98,65 @@ int snd_hdac_display_power(struct hdac_bus *bus, bool enable)
}
EXPORT_SYMBOL_GPL(snd_hdac_display_power);
#define CONTROLLER_IN_GPU(pci) (((pci)->device == 0x0a0c) || \
((pci)->device == 0x0c0c) || \
((pci)->device == 0x0d0c) || \
((pci)->device == 0x160c))
/**
* snd_hdac_get_display_clk - Get CDCLK in kHz
* snd_hdac_i915_set_bclk - Reprogram BCLK for HSW/BDW
* @bus: HDA core bus
*
* This function is supposed to be used only by a HD-audio controller
* driver that needs the interaction with i915 graphics.
* Intel HSW/BDW display HDA controller is in GPU. Both its power and link BCLK
* depends on GPU. Two Extended Mode registers EM4 (M value) and EM5 (N Value)
* are used to convert CDClk (Core Display Clock) to 24MHz BCLK:
* BCLK = CDCLK * M / N
* The values will be lost when the display power well is disabled and need to
* be restored to avoid abnormal playback speed.
*
* This function queries CDCLK value in kHz from the graphics driver and
* returns the value. A negative code is returned in error.
* Call this function at initializing and changing power well, as well as
* at ELD notifier for the hotplug.
*/
int snd_hdac_get_display_clk(struct hdac_bus *bus)
void snd_hdac_i915_set_bclk(struct hdac_bus *bus)
{
struct i915_audio_component *acomp = bus->audio_component;
struct pci_dev *pci = to_pci_dev(bus->dev);
int cdclk_freq;
unsigned int bclk_m, bclk_n;
if (!acomp || !acomp->ops || !acomp->ops->get_cdclk_freq)
return; /* only for i915 binding */
if (!CONTROLLER_IN_GPU(pci))
return; /* only HSW/BDW */
cdclk_freq = acomp->ops->get_cdclk_freq(acomp->dev);
switch (cdclk_freq) {
case 337500:
bclk_m = 16;
bclk_n = 225;
break;
case 450000:
default: /* default CDCLK 450MHz */
bclk_m = 4;
bclk_n = 75;
break;
case 540000:
bclk_m = 4;
bclk_n = 90;
break;
case 675000:
bclk_m = 8;
bclk_n = 225;
break;
}
if (!acomp || !acomp->ops)
return -ENODEV;
return acomp->ops->get_cdclk_freq(acomp->dev);
snd_hdac_chip_writew(bus, HSW_EM4, bclk_m);
snd_hdac_chip_writew(bus, HSW_EM5, bclk_n);
}
EXPORT_SYMBOL_GPL(snd_hdac_get_display_clk);
EXPORT_SYMBOL_GPL(snd_hdac_i915_set_bclk);
/* There is a fixed mapping between audio pin node and display port
* on current Intel platforms:
......
......@@ -857,50 +857,6 @@ static int param_set_xint(const char *val, const struct kernel_param *kp)
#define azx_del_card_list(chip) /* NOP */
#endif /* CONFIG_PM */
/* Intel HSW/BDW display HDA controller is in GPU. Both its power and link BCLK
* depends on GPU. Two Extended Mode registers EM4 (M value) and EM5 (N Value)
* are used to convert CDClk (Core Display Clock) to 24MHz BCLK:
* BCLK = CDCLK * M / N
* The values will be lost when the display power well is disabled and need to
* be restored to avoid abnormal playback speed.
*/
static void haswell_set_bclk(struct hda_intel *hda)
{
struct azx *chip = &hda->chip;
int cdclk_freq;
unsigned int bclk_m, bclk_n;
if (!hda->need_i915_power)
return;
cdclk_freq = snd_hdac_get_display_clk(azx_bus(chip));
switch (cdclk_freq) {
case 337500:
bclk_m = 16;
bclk_n = 225;
break;
case 450000:
default: /* default CDCLK 450MHz */
bclk_m = 4;
bclk_n = 75;
break;
case 540000:
bclk_m = 4;
bclk_n = 90;
break;
case 675000:
bclk_m = 8;
bclk_n = 225;
break;
}
azx_writew(chip, HSW_EM4, bclk_m);
azx_writew(chip, HSW_EM5, bclk_n);
}
#if defined(CONFIG_PM_SLEEP) || defined(SUPPORT_VGA_SWITCHEROO)
/*
* power management
......@@ -958,7 +914,7 @@ static int azx_resume(struct device *dev)
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL
&& hda->need_i915_power) {
snd_hdac_display_power(azx_bus(chip), true);
haswell_set_bclk(hda);
snd_hdac_i915_set_bclk(azx_bus(chip));
}
if (chip->msi)
if (pci_enable_msi(pci) < 0)
......@@ -1058,7 +1014,7 @@ static int azx_runtime_resume(struct device *dev)
bus = azx_bus(chip);
if (hda->need_i915_power) {
snd_hdac_display_power(bus, true);
haswell_set_bclk(hda);
snd_hdac_i915_set_bclk(bus);
} else {
/* toggle codec wakeup bit for STATESTS read */
snd_hdac_set_codec_wakeup(bus, true);
......@@ -1796,12 +1752,8 @@ static int azx_first_init(struct azx *chip)
/* initialize chip */
azx_init_pci(chip);
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
struct hda_intel *hda;
hda = container_of(chip, struct hda_intel, chip);
haswell_set_bclk(hda);
}
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
snd_hdac_i915_set_bclk(bus);
hda_intel_init_chip(chip, (probe_only[dev] & 2) == 0);
......
......@@ -2232,6 +2232,7 @@ static void intel_pin_eld_notify(void *audio_ptr, int port)
if (atomic_read(&(codec)->core.in_pm))
return;
snd_hdac_i915_set_bclk(&codec->bus->core);
check_presence_and_report(codec, pin_nid);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment