Commit bb29ab86 authored by Jens Taprogge's avatar Jens Taprogge Committed by Greg Kroah-Hartman

Staging: ipack/bridges/tpci200: change tpci200_slot->*_phys type.

Previously the *_phys fields were of type ipack_addr_space, which use
void pointers to refer to memory addresses.  Since the *_phys fields
refer to unmapped memory, this is not correct.  Introduce a new struct
ipack_region (which uses phys_addr_t to refer to the start of a region)
and use that as a replacement for struct ipack_addr_space.

struct ipack_region is defined in ipack.h because it is planned to later
expose the physical addressed to the IPack Module drivers.
Signed-off-by: default avatarJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: default avatarSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b412e893
......@@ -89,13 +89,13 @@ static void tpci200_unregister(struct tpci200_board *tpci200)
pci_dev_put(tpci200->info->pdev);
for (i = 0; i < TPCI200_NB_SLOT; i++) {
tpci200->slots[i].io_phys.address = NULL;
tpci200->slots[i].io_phys.start = 0;
tpci200->slots[i].io_phys.size = 0;
tpci200->slots[i].id_phys.address = NULL;
tpci200->slots[i].id_phys.start = 0;
tpci200->slots[i].id_phys.size = 0;
tpci200->slots[i].int_phys.address = NULL;
tpci200->slots[i].int_phys.start = 0;
tpci200->slots[i].int_phys.size = 0;
tpci200->slots[i].mem_phys.address = NULL;
tpci200->slots[i].mem_phys.start = 0;
tpci200->slots[i].mem_phys.size = 0;
}
}
......@@ -241,8 +241,8 @@ static int tpci200_register(struct tpci200_board *tpci200)
{
int i;
int res;
unsigned long ioidint_base;
unsigned long mem_base;
phys_addr_t ioidint_base;
phys_addr_t mem_base;
unsigned short slot_ctrl;
if (pci_enable_device(tpci200->info->pdev) < 0)
......@@ -308,23 +308,20 @@ static int tpci200_register(struct tpci200_board *tpci200)
/* Set all slot physical address space */
for (i = 0; i < TPCI200_NB_SLOT; i++) {
tpci200->slots[i].io_phys.address =
(void __iomem *)ioidint_base +
tpci200->slots[i].io_phys.start = ioidint_base +
TPCI200_IO_SPACE_OFF + TPCI200_IO_SPACE_GAP*i;
tpci200->slots[i].io_phys.size = TPCI200_IO_SPACE_SIZE;
tpci200->slots[i].id_phys.address =
(void __iomem *)ioidint_base +
tpci200->slots[i].id_phys.start = ioidint_base +
TPCI200_ID_SPACE_OFF + TPCI200_ID_SPACE_GAP*i;
tpci200->slots[i].id_phys.size = TPCI200_ID_SPACE_SIZE;
tpci200->slots[i].int_phys.address =
(void __iomem *)ioidint_base +
tpci200->slots[i].int_phys.start = ioidint_base +
TPCI200_INT_SPACE_OFF + TPCI200_INT_SPACE_GAP * i;
tpci200->slots[i].int_phys.size = TPCI200_INT_SPACE_SIZE;
tpci200->slots[i].mem_phys.address =
(void __iomem *)mem_base + TPCI200_MEM8_GAP*i;
tpci200->slots[i].mem_phys.start = mem_base +
TPCI200_MEM8_GAP * i;
tpci200->slots[i].mem_phys.size = TPCI200_MEM8_SIZE;
writew(slot_ctrl, &tpci200->info->interface_regs->control[i]);
......@@ -419,11 +416,11 @@ static int tpci200_slot_unmap_space(struct ipack_device *dev, int space)
}
static int tpci200_slot_map_space(struct ipack_device *dev,
unsigned int memory_size, int space)
ssize_t memory_size, int space)
{
int res = 0;
unsigned int size_to_map;
void __iomem *phys_address;
size_t size_to_map;
phys_addr_t phys_address;
struct ipack_addr_space *virt_addr_space;
struct tpci200_board *tpci200;
......@@ -445,7 +442,7 @@ static int tpci200_slot_map_space(struct ipack_device *dev,
}
virt_addr_space = &dev->io_space;
phys_address = tpci200->slots[dev->slot].io_phys.address;
phys_address = tpci200->slots[dev->slot].io_phys.start;
size_to_map = tpci200->slots[dev->slot].io_phys.size;
break;
case IPACK_ID_SPACE:
......@@ -458,7 +455,7 @@ static int tpci200_slot_map_space(struct ipack_device *dev,
}
virt_addr_space = &dev->id_space;
phys_address = tpci200->slots[dev->slot].id_phys.address;
phys_address = tpci200->slots[dev->slot].id_phys.start;
size_to_map = tpci200->slots[dev->slot].id_phys.size;
break;
case IPACK_INT_SPACE:
......@@ -471,7 +468,7 @@ static int tpci200_slot_map_space(struct ipack_device *dev,
}
virt_addr_space = &dev->int_space;
phys_address = tpci200->slots[dev->slot].int_phys.address;
phys_address = tpci200->slots[dev->slot].int_phys.start;
size_to_map = tpci200->slots[dev->slot].int_phys.size;
break;
case IPACK_MEM_SPACE:
......@@ -486,14 +483,14 @@ static int tpci200_slot_map_space(struct ipack_device *dev,
if (memory_size > tpci200->slots[dev->slot].mem_phys.size) {
dev_err(&dev->dev,
"Slot [%d:%d] request is 0x%X memory, only 0x%X available !\n",
"Slot [%d:%d] request is 0x%zX memory, only 0x%zX available !\n",
dev->bus->bus_nr, dev->slot, memory_size,
tpci200->slots[dev->slot].mem_phys.size);
res = -EINVAL;
goto out_unlock;
}
phys_address = tpci200->slots[dev->slot].mem_phys.address;
phys_address = tpci200->slots[dev->slot].mem_phys.start;
size_to_map = memory_size;
break;
default:
......
......@@ -137,11 +137,11 @@ struct slot_irq {
*
*/
struct tpci200_slot {
struct slot_irq *irq;
struct ipack_addr_space io_phys;
struct ipack_addr_space id_phys;
struct ipack_addr_space int_phys;
struct ipack_addr_space mem_phys;
struct slot_irq *irq;
struct ipack_region io_phys;
struct ipack_region id_phys;
struct ipack_region int_phys;
struct ipack_region mem_phys;
};
/**
......
......@@ -49,6 +49,13 @@ struct ipack_addr_space {
unsigned int size;
};
/**
*/
struct ipack_region {
phys_addr_t start;
size_t size;
};
/**
* struct ipack_device
*
......@@ -124,7 +131,7 @@ struct ipack_driver {
* @reset_timeout: Resets the state returned by get_timeout.
*/
struct ipack_bus_ops {
int (*map_space) (struct ipack_device *dev, unsigned int memory_size, int space);
int (*map_space) (struct ipack_device *dev, ssize_t memory_size, int space);
int (*unmap_space) (struct ipack_device *dev, int space);
int (*request_irq) (struct ipack_device *dev,
irqreturn_t (*handler)(void *), void *arg);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment