Merge tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few small, driver specific bug fixes, nothing exciting here but all
  needed if you happen to be using the affected hardware."

* tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: palmas: fix regmap offsets for enable/disable
  regulator: tps6524x: Fix get_voltage_sel for fixed voltage
  regulator: tps65023: Fix mask for LDOs output voltage select control

drivers/regulator/palmas-regulator.c

@@ -673,7 +673,9 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 			pmic->desc[id].ops = &palmas_ops_smps10;
 			pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
 			pmic->desc[id].vsel_mask = SMPS10_VSEL;
-			pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS;
+			pmic->desc[id].enable_reg =
+					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+							PALMAS_SMPS10_STATUS);
 			pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
 		}
 
@@ -739,7 +741,8 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 
 		pmic->desc[id].type = REGULATOR_VOLTAGE;
 		pmic->desc[id].owner = THIS_MODULE;
-		pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr;
+		pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+						palmas_regs_info[id].ctrl_addr);
 		pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
 
 		if (pdata && pdata->reg_data)

drivers/regulator/tps65023-regulator.c

@@ -71,7 +71,7 @@
 
 /* LDO_CTRL bitfields */
 #define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id)	((ldo_id)*4)
-#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id)	(0x0F << ((ldo_id)*4))
+#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id)	(0x07 << ((ldo_id)*4))
 
 /* Number of step-down converters available */
 #define TPS65023_NUM_DCDC		3

drivers/regulator/tps6524x-regulator.c

@@ -482,7 +482,7 @@ static int get_voltage_sel(struct regulator_dev *rdev)
 	info	= &supply_info[rdev_get_id(rdev)];
 
 	if (info->flags & FIXED_VOLTAGE)
-		return info->fixed_voltage;
+		return 0;
 
 	ret = read_field(hw, &info->voltage);
 	if (ret < 0)