Commit bc43cee8 authored by Robin Murphy's avatar Robin Murphy Committed by Heiko Stuebner

arm64: dts: rockchip: Update nanopi4 phy reset properties

Use the now-preferred generic phy reset properties instead of the
dwmac-specific ones.
Signed-off-by: default avatarRobin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/4d16c24ae3651a2119cf5bb1213f46a9fce4b39a.1570444773.git.robin.murphy@arm.comSigned-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent f94ffd95
...@@ -152,9 +152,6 @@ &gmac { ...@@ -152,9 +152,6 @@ &gmac {
phy-handle = <&rtl8211e>; phy-handle = <&rtl8211e>;
phy-mode = "rgmii"; phy-mode = "rgmii";
phy-supply = <&vcc3v3_s3>; phy-supply = <&vcc3v3_s3>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>;
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
tx_delay = <0x28>; tx_delay = <0x28>;
rx_delay = <0x11>; rx_delay = <0x11>;
status = "okay"; status = "okay";
...@@ -168,6 +165,9 @@ rtl8211e: phy@1 { ...@@ -168,6 +165,9 @@ rtl8211e: phy@1 {
reg = <1>; reg = <1>;
interrupt-parent = <&gpio3>; interrupt-parent = <&gpio3>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <30000>;
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
}; };
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment