Commit bd796809 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by David S. Miller

pch_gbe: remove inline keyword for exported functions

There is no much sense to mark functions inline that are going to be used in
the other compile modules.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b8553b89
......@@ -19,6 +19,7 @@
*/
#include "pch_gbe.h"
#include "pch_gbe_phy.h"
#include "pch_gbe_api.h"
/* bus type values */
#define pch_gbe_bus_type_unknown 0
......@@ -112,7 +113,7 @@ static void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw)
* 0: Successfully
* ENOSYS: Function is not registered
*/
inline s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
{
if (!hw->reg) {
pr_err("ERROR: Registers not mapped\n");
......@@ -126,7 +127,7 @@ inline s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
* pch_gbe_hal_get_bus_info - Obtain bus information for adapter
* @hw: Pointer to the HW structure
*/
inline void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
{
if (!hw->func->get_bus_info)
pr_err("ERROR: configuration\n");
......@@ -141,7 +142,7 @@ inline void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
* 0: Successfully
* ENOSYS: Function is not registered
*/
inline s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
{
if (!hw->func->init_hw) {
pr_err("ERROR: configuration\n");
......@@ -159,7 +160,7 @@ inline s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
* 0: Successfully
* Negative value: Failed
*/
inline s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset,
s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset,
u16 *data)
{
if (!hw->func->read_phy_reg)
......@@ -176,7 +177,7 @@ inline s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset,
* 0: Successfully
* Negative value: Failed
*/
inline s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
u16 data)
{
if (!hw->func->write_phy_reg)
......@@ -188,7 +189,7 @@ inline s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
* pch_gbe_hal_phy_hw_reset - Hard PHY reset
* @hw: Pointer to the HW structure
*/
inline void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
{
if (!hw->func->reset_phy)
pr_err("ERROR: configuration\n");
......@@ -200,7 +201,7 @@ inline void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
* pch_gbe_hal_phy_sw_reset - Soft PHY reset
* @hw: Pointer to the HW structure
*/
inline void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
{
if (!hw->func->sw_reset_phy)
pr_err("ERROR: configuration\n");
......@@ -215,7 +216,7 @@ inline void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
* 0: Successfully
* ENOSYS: Function is not registered
*/
inline s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw)
s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw)
{
if (!hw->func->read_mac_addr) {
pr_err("ERROR: configuration\n");
......@@ -228,7 +229,7 @@ inline s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw)
* pch_gbe_hal_power_up_phy - Power up PHY
* @hw: Pointer to the HW structure
*/
inline void pch_gbe_hal_power_up_phy(struct pch_gbe_hw *hw)
void pch_gbe_hal_power_up_phy(struct pch_gbe_hw *hw)
{
if (hw->func->power_up_phy)
hw->func->power_up_phy(hw);
......@@ -238,7 +239,7 @@ inline void pch_gbe_hal_power_up_phy(struct pch_gbe_hw *hw)
* pch_gbe_hal_power_down_phy - Power down PHY
* @hw: Pointer to the HW structure
*/
inline void pch_gbe_hal_power_down_phy(struct pch_gbe_hw *hw)
void pch_gbe_hal_power_down_phy(struct pch_gbe_hw *hw)
{
if (hw->func->power_down_phy)
hw->func->power_down_phy(hw);
......
......@@ -287,7 +287,7 @@ static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
return copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)) ? -EFAULT : 0;
}
inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw)
static inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw)
{
iowrite32(0x01, &hw->reg->MAC_ADDR_LOAD);
}
......
......@@ -235,7 +235,7 @@ void pch_gbe_phy_power_down(struct pch_gbe_hw *hw)
* pch_gbe_phy_set_rgmii - RGMII interface setting
* @hw: Pointer to the HW structure
*/
inline void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
{
pch_gbe_phy_sw_reset(hw);
}
......@@ -270,5 +270,4 @@ void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
pch_gbe_phy_read_reg_miic(hw, PHY_PHYSP_CONTROL, &mii_reg);
mii_reg |= PHYSP_CTRL_ASSERT_CRS_TX;
pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL, mii_reg);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment