Commit be9755f9 authored by Sunil Goutham's avatar Sunil Goutham Committed by Greg Kroah-Hartman

net: thunderx: Fix link status reporting

[ Upstream commit 3f4c68cf ]

Check for SMU RX local/remote faults along with SPU LINK
status. Otherwise at times link is UP at our end but DOWN
at link partner's side. Also due to an issue in BGX it's
rarely seen that initialization doesn't happen properly
and SMU RX reports faults with everything fine at SPU.
This patch tries to reinitialize LMAC to fix it.

Also fixed LMAC disable sequence to properly bring down link.
Signed-off-by: default avatarSunil Goutham <sgoutham@cavium.com>
Signed-off-by: default avatarTao Wang <tao.wang@cavium.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c5852a85
...@@ -549,7 +549,9 @@ static int bgx_xaui_check_link(struct lmac *lmac) ...@@ -549,7 +549,9 @@ static int bgx_xaui_check_link(struct lmac *lmac)
} }
/* Clear rcvflt bit (latching high) and read it back */ /* Clear rcvflt bit (latching high) and read it back */
bgx_reg_modify(bgx, lmacid, BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT); if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT)
bgx_reg_modify(bgx, lmacid,
BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT);
if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) { if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) {
dev_err(&bgx->pdev->dev, "Receive fault, retry training\n"); dev_err(&bgx->pdev->dev, "Receive fault, retry training\n");
if (bgx->use_training) { if (bgx->use_training) {
...@@ -568,13 +570,6 @@ static int bgx_xaui_check_link(struct lmac *lmac) ...@@ -568,13 +570,6 @@ static int bgx_xaui_check_link(struct lmac *lmac)
return -1; return -1;
} }
/* Wait for MAC RX to be ready */
if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_RX_CTL,
SMU_RX_CTL_STATUS, true)) {
dev_err(&bgx->pdev->dev, "SMU RX link not okay\n");
return -1;
}
/* Wait for BGX RX to be idle */ /* Wait for BGX RX to be idle */
if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_RX_IDLE, false)) { if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_RX_IDLE, false)) {
dev_err(&bgx->pdev->dev, "SMU RX not idle\n"); dev_err(&bgx->pdev->dev, "SMU RX not idle\n");
...@@ -587,29 +582,30 @@ static int bgx_xaui_check_link(struct lmac *lmac) ...@@ -587,29 +582,30 @@ static int bgx_xaui_check_link(struct lmac *lmac)
return -1; return -1;
} }
if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) { /* Clear receive packet disable */
dev_err(&bgx->pdev->dev, "Receive fault\n");
return -1;
}
/* Receive link is latching low. Force it high and verify it */
bgx_reg_modify(bgx, lmacid, BGX_SPUX_STATUS1, SPU_STATUS1_RCV_LNK);
if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_STATUS1,
SPU_STATUS1_RCV_LNK, false)) {
dev_err(&bgx->pdev->dev, "SPU receive link down\n");
return -1;
}
cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_MISC_CONTROL); cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_MISC_CONTROL);
cfg &= ~SPU_MISC_CTL_RX_DIS; cfg &= ~SPU_MISC_CTL_RX_DIS;
bgx_reg_write(bgx, lmacid, BGX_SPUX_MISC_CONTROL, cfg); bgx_reg_write(bgx, lmacid, BGX_SPUX_MISC_CONTROL, cfg);
return 0;
/* Check for MAC RX faults */
cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_RX_CTL);
/* 0 - Link is okay, 1 - Local fault, 2 - Remote fault */
cfg &= SMU_RX_CTL_STATUS;
if (!cfg)
return 0;
/* Rx local/remote fault seen.
* Do lmac reinit to see if condition recovers
*/
bgx_lmac_xaui_init(bgx, lmacid, bgx->lmac_type);
return -1;
} }
static void bgx_poll_for_link(struct work_struct *work) static void bgx_poll_for_link(struct work_struct *work)
{ {
struct lmac *lmac; struct lmac *lmac;
u64 link; u64 spu_link, smu_link;
lmac = container_of(work, struct lmac, dwork.work); lmac = container_of(work, struct lmac, dwork.work);
...@@ -619,8 +615,11 @@ static void bgx_poll_for_link(struct work_struct *work) ...@@ -619,8 +615,11 @@ static void bgx_poll_for_link(struct work_struct *work)
bgx_poll_reg(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1, bgx_poll_reg(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1,
SPU_STATUS1_RCV_LNK, false); SPU_STATUS1_RCV_LNK, false);
link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1); spu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1);
if (link & SPU_STATUS1_RCV_LNK) { smu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SMUX_RX_CTL);
if ((spu_link & SPU_STATUS1_RCV_LNK) &&
!(smu_link & SMU_RX_CTL_STATUS)) {
lmac->link_up = 1; lmac->link_up = 1;
if (lmac->bgx->lmac_type == BGX_MODE_XLAUI) if (lmac->bgx->lmac_type == BGX_MODE_XLAUI)
lmac->last_speed = 40000; lmac->last_speed = 40000;
...@@ -634,9 +633,15 @@ static void bgx_poll_for_link(struct work_struct *work) ...@@ -634,9 +633,15 @@ static void bgx_poll_for_link(struct work_struct *work)
} }
if (lmac->last_link != lmac->link_up) { if (lmac->last_link != lmac->link_up) {
if (lmac->link_up) {
if (bgx_xaui_check_link(lmac)) {
/* Errors, clear link_up state */
lmac->link_up = 0;
lmac->last_speed = SPEED_UNKNOWN;
lmac->last_duplex = DUPLEX_UNKNOWN;
}
}
lmac->last_link = lmac->link_up; lmac->last_link = lmac->link_up;
if (lmac->link_up)
bgx_xaui_check_link(lmac);
} }
queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2); queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2);
...@@ -708,7 +713,7 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid) ...@@ -708,7 +713,7 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid) static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid)
{ {
struct lmac *lmac; struct lmac *lmac;
u64 cmrx_cfg; u64 cfg;
lmac = &bgx->lmac[lmacid]; lmac = &bgx->lmac[lmacid];
if (lmac->check_link) { if (lmac->check_link) {
...@@ -717,9 +722,33 @@ static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid) ...@@ -717,9 +722,33 @@ static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid)
destroy_workqueue(lmac->check_link); destroy_workqueue(lmac->check_link);
} }
cmrx_cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); /* Disable packet reception */
cmrx_cfg &= ~(1 << 15); cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG);
bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cmrx_cfg); cfg &= ~CMR_PKT_RX_EN;
bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg);
/* Give chance for Rx/Tx FIFO to get drained */
bgx_poll_reg(bgx, lmacid, BGX_CMRX_RX_FIFO_LEN, (u64)0x1FFF, true);
bgx_poll_reg(bgx, lmacid, BGX_CMRX_TX_FIFO_LEN, (u64)0x3FFF, true);
/* Disable packet transmission */
cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG);
cfg &= ~CMR_PKT_TX_EN;
bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg);
/* Disable serdes lanes */
if (!lmac->is_sgmii)
bgx_reg_modify(bgx, lmacid,
BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER);
else
bgx_reg_modify(bgx, lmacid,
BGX_GMP_PCS_MRX_CTL, PCS_MRX_CTL_PWR_DN);
/* Disable LMAC */
cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG);
cfg &= ~CMR_EN;
bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg);
bgx_flush_dmac_addrs(bgx, lmacid); bgx_flush_dmac_addrs(bgx, lmacid);
if ((bgx->lmac_type != BGX_MODE_XFI) && if ((bgx->lmac_type != BGX_MODE_XFI) &&
......
...@@ -41,6 +41,7 @@ ...@@ -41,6 +41,7 @@
#define BGX_CMRX_RX_STAT10 0xC0 #define BGX_CMRX_RX_STAT10 0xC0
#define BGX_CMRX_RX_BP_DROP 0xC8 #define BGX_CMRX_RX_BP_DROP 0xC8
#define BGX_CMRX_RX_DMAC_CTL 0x0E8 #define BGX_CMRX_RX_DMAC_CTL 0x0E8
#define BGX_CMRX_RX_FIFO_LEN 0x108
#define BGX_CMR_RX_DMACX_CAM 0x200 #define BGX_CMR_RX_DMACX_CAM 0x200
#define RX_DMACX_CAM_EN BIT_ULL(48) #define RX_DMACX_CAM_EN BIT_ULL(48)
#define RX_DMACX_CAM_LMACID(x) (x << 49) #define RX_DMACX_CAM_LMACID(x) (x << 49)
...@@ -50,6 +51,7 @@ ...@@ -50,6 +51,7 @@
#define BGX_CMR_CHAN_MSK_AND 0x450 #define BGX_CMR_CHAN_MSK_AND 0x450
#define BGX_CMR_BIST_STATUS 0x460 #define BGX_CMR_BIST_STATUS 0x460
#define BGX_CMR_RX_LMACS 0x468 #define BGX_CMR_RX_LMACS 0x468
#define BGX_CMRX_TX_FIFO_LEN 0x518
#define BGX_CMRX_TX_STAT0 0x600 #define BGX_CMRX_TX_STAT0 0x600
#define BGX_CMRX_TX_STAT1 0x608 #define BGX_CMRX_TX_STAT1 0x608
#define BGX_CMRX_TX_STAT2 0x610 #define BGX_CMRX_TX_STAT2 0x610
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment