Commit bea238f6 authored by Rajashekhara, Sudhakar's avatar Rajashekhara, Sudhakar Committed by Kevin Hilman

davinci: Move the da830/omap-l137 #defines to header file

With the introduction of TI da850/omap-l138, some of the macros
defined for da830/omap-l137 will be needed in da850 source file.
So, move the common macros to da8xx.h header file.

Also, modify the macro names from DA830_... to DA8XX_.
Signed-off-by: default avatarSudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: default avatarKevin Hilman <khilman@deeprootsystems.com>
parent 1c92a554
......@@ -27,14 +27,6 @@
#include "clock.h"
#include "mux.h"
#define DA830_PSC0_BASE 0x01c10000
#define DA830_PLL0_BASE 0x01c11000
#define DA830_JTAG_ID_REG 0x01c14018
#define DA830_TIMER64P0_BASE 0x01c20000
#define DA830_TIMER64P1_BASE 0x01c21000
#define DA830_GPIO_BASE 0x01e26000
#define DA830_PSC1_BASE 0x01e27000
/* Offsets of the 8 compare registers on the da830 */
#define DA830_CMP12_0 0x60
#define DA830_CMP12_1 0x64
......@@ -49,7 +41,7 @@
static struct pll_data pll0_data = {
.num = 1,
.phys_base = DA830_PLL0_BASE,
.phys_base = DA8XX_PLL0_BASE,
.flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
};
......@@ -1174,8 +1166,8 @@ static struct map_desc da830_io_desc[] = {
};
static void __iomem *da830_psc_bases[] = {
IO_ADDRESS(DA830_PSC0_BASE),
IO_ADDRESS(DA830_PSC1_BASE),
IO_ADDRESS(DA8XX_PSC0_BASE),
IO_ADDRESS(DA8XX_PSC1_BASE),
};
/* Contents of JTAG ID register used to identify exact cpu type */
......@@ -1191,14 +1183,14 @@ static struct davinci_id da830_ids[] = {
static struct davinci_timer_instance da830_timer_instance[2] = {
{
.base = IO_ADDRESS(DA830_TIMER64P0_BASE),
.base = IO_ADDRESS(DA8XX_TIMER64P0_BASE),
.bottom_irq = IRQ_DA8XX_TINT12_0,
.top_irq = IRQ_DA8XX_TINT34_0,
.cmp_off = DA830_CMP12_0,
.cmp_irq = IRQ_DA830_T12CMPINT0_0,
},
{
.base = IO_ADDRESS(DA830_TIMER64P1_BASE),
.base = IO_ADDRESS(DA8XX_TIMER64P1_BASE),
.bottom_irq = IRQ_DA8XX_TINT12_1,
.top_irq = IRQ_DA8XX_TINT34_1,
.cmp_off = DA830_CMP12_0,
......@@ -1220,7 +1212,7 @@ static struct davinci_timer_info da830_timer_info = {
static struct davinci_soc_info davinci_soc_info_da830 = {
.io_desc = da830_io_desc,
.io_desc_num = ARRAY_SIZE(da830_io_desc),
.jtag_id_base = IO_ADDRESS(DA830_JTAG_ID_REG),
.jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG),
.ids = da830_ids,
.ids_num = ARRAY_SIZE(da830_ids),
.cpu_clks = da830_clks,
......@@ -1234,7 +1226,7 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
.intc_irq_prios = da830_default_priorities,
.intc_irq_num = DA830_N_CP_INTC_IRQ,
.timer_info = &da830_timer_info,
.gpio_base = IO_ADDRESS(DA830_GPIO_BASE),
.gpio_base = IO_ADDRESS(DA8XX_GPIO_BASE),
.gpio_num = 128,
.gpio_irq = IRQ_DA8XX_GPIO0,
.serial_dev = &da8xx_serial_device,
......
......@@ -29,6 +29,14 @@
#define DA8XX_BOOT_CFG_BASE (IO_PHYS + 0x14000)
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
#define DA8XX_JTAG_ID_REG 0x01c14018
#define DA8XX_TIMER64P0_BASE 0x01c20000
#define DA8XX_TIMER64P1_BASE 0x01c21000
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_PSC1_BASE 0x01e27000
void __init da830_init(void);
int da8xx_register_edma(void);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment