Commit beb5818b authored by Linus Walleij's avatar Linus Walleij

ARM: integrator: move AP timer to clocksource

This moves the timer/clocksource implementation for the
Integrator/AP down to drivers/clocksource and augments the
driver a little to use CLOCKSOURCE_OF_DECLARE(). Remove
the static mapping of the timer blocks while we're at it.

Tested on the Integrator/AP.
Acked-by: default avatarThomas Gleixner <tglx@linutronix.de>
Acked-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 9713497b
...@@ -27,13 +27,9 @@ ...@@ -27,13 +27,9 @@
#include <linux/syscore_ops.h> #include <linux/syscore_ops.h>
#include <linux/amba/bus.h> #include <linux/amba/bus.h>
#include <linux/amba/kmi.h> #include <linux/amba/kmi.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/irqchip.h> #include <linux/irqchip.h>
#include <linux/mtd/physmap.h> #include <linux/mtd/physmap.h>
#include <linux/clk.h>
#include <linux/platform_data/clk-integrator.h> #include <linux/platform_data/clk-integrator.h>
#include <linux/of_irq.h> #include <linux/of_irq.h>
#include <linux/of_address.h> #include <linux/of_address.h>
...@@ -41,8 +37,6 @@ ...@@ -41,8 +37,6 @@
#include <linux/stat.h> #include <linux/stat.h>
#include <linux/sys_soc.h> #include <linux/sys_soc.h>
#include <linux/termios.h> #include <linux/termios.h>
#include <linux/sched_clock.h>
#include <linux/clk-provider.h>
#include <asm/hardware/arm_timer.h> #include <asm/hardware/arm_timer.h>
#include <asm/setup.h> #include <asm/setup.h>
...@@ -89,11 +83,6 @@ static void __iomem *ebi_base; ...@@ -89,11 +83,6 @@ static void __iomem *ebi_base;
static struct map_desc ap_io_desc[] __initdata __maybe_unused = { static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
{ {
.virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_IC_BASE), .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_IC_BASE), .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
.length = SZ_4K, .length = SZ_4K,
...@@ -257,188 +246,10 @@ struct amba_pl010_data ap_uart_data = { ...@@ -257,188 +246,10 @@ struct amba_pl010_data ap_uart_data = {
.set_mctrl = integrator_uart_set_mctrl, .set_mctrl = integrator_uart_set_mctrl,
}; };
/*
* Where is the timer (VA)?
*/
#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
static unsigned long timer_reload;
static u64 notrace integrator_read_sched_clock(void)
{
return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE);
}
static void integrator_clocksource_init(unsigned long inrate,
void __iomem *base)
{
u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
unsigned long rate = inrate;
if (rate >= 1500000) {
rate /= 16;
ctrl |= TIMER_CTRL_DIV16;
}
writel(0xffff, base + TIMER_LOAD);
writel(ctrl, base + TIMER_CTRL);
clocksource_mmio_init(base + TIMER_VALUE, "timer2",
rate, 200, 16, clocksource_mmio_readl_down);
sched_clock_register(integrator_read_sched_clock, 16, rate);
}
static void __iomem * clkevt_base;
/*
* IRQ handler for the timer
*/
static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
/* clear the interrupt */
writel(1, clkevt_base + TIMER_INTCLR);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
{
u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
/* Disable timer */
writel(ctrl, clkevt_base + TIMER_CTRL);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* Enable the timer and start the periodic tick */
writel(timer_reload, clkevt_base + TIMER_LOAD);
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
writel(ctrl, clkevt_base + TIMER_CTRL);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Leave the timer disabled, .set_next_event will enable it */
ctrl &= ~TIMER_CTRL_PERIODIC;
writel(ctrl, clkevt_base + TIMER_CTRL);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_RESUME:
default:
/* Just leave in disabled state */
break;
}
}
static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
{
unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
writel(next, clkevt_base + TIMER_LOAD);
writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
return 0;
}
static struct clock_event_device integrator_clockevent = {
.name = "timer1",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = clkevt_set_mode,
.set_next_event = clkevt_set_next_event,
.rating = 300,
};
static struct irqaction integrator_timer_irq = {
.name = "timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = integrator_timer_interrupt,
.dev_id = &integrator_clockevent,
};
static void integrator_clockevent_init(unsigned long inrate,
void __iomem *base, int irq)
{
unsigned long rate = inrate;
unsigned int ctrl = 0;
clkevt_base = base;
/* Calculate and program a divisor */
if (rate > 0x100000 * HZ) {
rate /= 256;
ctrl |= TIMER_CTRL_DIV256;
} else if (rate > 0x10000 * HZ) {
rate /= 16;
ctrl |= TIMER_CTRL_DIV16;
}
timer_reload = rate / HZ;
writel(ctrl, clkevt_base + TIMER_CTRL);
setup_irq(irq, &integrator_timer_irq);
clockevents_config_and_register(&integrator_clockevent,
rate,
1,
0xffffU);
}
void __init ap_init_early(void) void __init ap_init_early(void)
{ {
} }
static void __init ap_of_timer_init(void)
{
struct device_node *node;
const char *path;
void __iomem *base;
int err;
int irq;
struct clk *clk;
unsigned long rate;
of_clk_init(NULL);
err = of_property_read_string(of_aliases,
"arm,timer-primary", &path);
if (WARN_ON(err))
return;
node = of_find_node_by_path(path);
base = of_iomap(node, 0);
if (WARN_ON(!base))
return;
clk = of_clk_get(node, 0);
BUG_ON(IS_ERR(clk));
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
writel(0, base + TIMER_CTRL);
integrator_clocksource_init(rate, base);
err = of_property_read_string(of_aliases,
"arm,timer-secondary", &path);
if (WARN_ON(err))
return;
node = of_find_node_by_path(path);
base = of_iomap(node, 0);
if (WARN_ON(!base))
return;
irq = irq_of_parse_and_map(node, 0);
clk = of_clk_get(node, 0);
BUG_ON(IS_ERR(clk));
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
writel(0, base + TIMER_CTRL);
integrator_clockevent_init(rate, base, irq);
}
static void __init ap_init_irq_of(void) static void __init ap_init_irq_of(void)
{ {
cm_init(); cm_init();
...@@ -553,7 +364,6 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") ...@@ -553,7 +364,6 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
.map_io = ap_map_io, .map_io = ap_map_io,
.init_early = ap_init_early, .init_early = ap_init_early,
.init_irq = ap_init_irq_of, .init_irq = ap_init_irq_of,
.init_time = ap_of_timer_init,
.init_machine = ap_init_of, .init_machine = ap_init_of,
.restart = integrator_restart, .restart = integrator_restart,
.dt_compat = ap_dt_board_compat, .dt_compat = ap_dt_board_compat,
......
...@@ -45,4 +45,5 @@ obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o ...@@ -45,4 +45,5 @@ obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o
obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
/*
* Integrator/AP timer driver
* Copyright (C) 2000-2003 Deep Blue Solutions Ltd
* Copyright (c) 2014, Linaro Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/clk.h>
#include <linux/clocksource.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/sched_clock.h>
#include <asm/hardware/arm_timer.h>
static void __iomem * sched_clk_base;
static u64 notrace integrator_read_sched_clock(void)
{
return -readl(sched_clk_base + TIMER_VALUE);
}
static void integrator_clocksource_init(unsigned long inrate,
void __iomem *base)
{
u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
unsigned long rate = inrate;
if (rate >= 1500000) {
rate /= 16;
ctrl |= TIMER_CTRL_DIV16;
}
writel(0xffff, base + TIMER_LOAD);
writel(ctrl, base + TIMER_CTRL);
clocksource_mmio_init(base + TIMER_VALUE, "timer2",
rate, 200, 16, clocksource_mmio_readl_down);
sched_clk_base = base;
sched_clock_register(integrator_read_sched_clock, 16, rate);
}
static unsigned long timer_reload;
static void __iomem * clkevt_base;
/*
* IRQ handler for the timer
*/
static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
/* clear the interrupt */
writel(1, clkevt_base + TIMER_INTCLR);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
{
u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
/* Disable timer */
writel(ctrl, clkevt_base + TIMER_CTRL);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* Enable the timer and start the periodic tick */
writel(timer_reload, clkevt_base + TIMER_LOAD);
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
writel(ctrl, clkevt_base + TIMER_CTRL);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Leave the timer disabled, .set_next_event will enable it */
ctrl &= ~TIMER_CTRL_PERIODIC;
writel(ctrl, clkevt_base + TIMER_CTRL);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_RESUME:
default:
/* Just leave in disabled state */
break;
}
}
static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
{
unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
writel(next, clkevt_base + TIMER_LOAD);
writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
return 0;
}
static struct clock_event_device integrator_clockevent = {
.name = "timer1",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = clkevt_set_mode,
.set_next_event = clkevt_set_next_event,
.rating = 300,
};
static struct irqaction integrator_timer_irq = {
.name = "timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = integrator_timer_interrupt,
.dev_id = &integrator_clockevent,
};
static void integrator_clockevent_init(unsigned long inrate,
void __iomem *base, int irq)
{
unsigned long rate = inrate;
unsigned int ctrl = 0;
clkevt_base = base;
/* Calculate and program a divisor */
if (rate > 0x100000 * HZ) {
rate /= 256;
ctrl |= TIMER_CTRL_DIV256;
} else if (rate > 0x10000 * HZ) {
rate /= 16;
ctrl |= TIMER_CTRL_DIV16;
}
timer_reload = rate / HZ;
writel(ctrl, clkevt_base + TIMER_CTRL);
setup_irq(irq, &integrator_timer_irq);
clockevents_config_and_register(&integrator_clockevent,
rate,
1,
0xffffU);
}
static void __init integrator_ap_timer_init_of(struct device_node *node)
{
const char *path;
void __iomem *base;
int err;
int irq;
struct clk *clk;
unsigned long rate;
struct device_node *pri_node;
struct device_node *sec_node;
base = of_io_request_and_map(node, 0, "integrator-timer");
if (!base)
return;
clk = of_clk_get(node, 0);
if (IS_ERR(clk)) {
pr_err("No clock for %s\n", node->name);
return;
}
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
writel(0, base + TIMER_CTRL);
err = of_property_read_string(of_aliases,
"arm,timer-primary", &path);
if (WARN_ON(err))
return;
pri_node = of_find_node_by_path(path);
err = of_property_read_string(of_aliases,
"arm,timer-secondary", &path);
if (WARN_ON(err))
return;
sec_node = of_find_node_by_path(path);
if (node == pri_node) {
/* The primary timer lacks IRQ, use as clocksource */
integrator_clocksource_init(rate, base);
return;
}
if (node == sec_node) {
/* The secondary timer will drive the clock event */
irq = irq_of_parse_and_map(node, 0);
integrator_clockevent_init(rate, base, irq);
return;
}
pr_info("Timer @%p unused\n", base);
clk_disable_unprepare(clk);
}
CLOCKSOURCE_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer",
integrator_ap_timer_init_of);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment