Commit bed6d27b authored by Hugo Grostabussiat's avatar Hugo Grostabussiat Committed by Mauro Carvalho Chehab

media: usbtv: Enforce standard for color decoding

Depending on the chosen standard, configure the decoder to use the
appropriate color encoding standard (PAL-like, NTSC-like or SECAM).

Until now, the decoder was not configured for a specific color standard,
making it autodetect the color encoding.

While this may sound fine, it potentially causes the wrong image tuning
parameters to be applied (e.g. tuning parameters for NTSC are applied to
a PAL source), and may confuse users about what the actual standard is
in use.

This commit explicitly configures the color standard the decoder will
use, making it visually obvious if a wrong standard was chosen.
Signed-off-by: default avatarHugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: default avatarHans Verkuil <hansverk@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent a8b48e22
......@@ -121,6 +121,25 @@ static int usbtv_select_input(struct usbtv *usbtv, int input)
return ret;
}
static uint16_t usbtv_norm_to_16f_reg(v4l2_std_id norm)
{
/* NTSC M/M-JP/M-KR */
if (norm & V4L2_STD_NTSC)
return 0x00b8;
/* PAL BG/DK/H/I */
if (norm & V4L2_STD_PAL)
return 0x00ee;
/* SECAM B/D/G/H/K/K1/L/Lc */
if (norm & V4L2_STD_SECAM)
return 0x00ff;
if (norm & V4L2_STD_NTSC_443)
return 0x00a8;
if (norm & (V4L2_STD_PAL_M | V4L2_STD_PAL_60))
return 0x00bc;
/* Fallback to automatic detection for other standards */
return 0x0000;
}
static int usbtv_select_norm(struct usbtv *usbtv, v4l2_std_id norm)
{
int ret;
......@@ -154,7 +173,7 @@ static int usbtv_select_norm(struct usbtv *usbtv, v4l2_std_id norm)
{ USBTV_BASE + 0x0263, 0x0017 },
{ USBTV_BASE + 0x0266, 0x0016 },
{ USBTV_BASE + 0x0267, 0x0036 },
/* Epilog */
/* End image tuning */
{ USBTV_BASE + 0x024e, 0x0002 },
{ USBTV_BASE + 0x024f, 0x0002 },
};
......@@ -182,7 +201,7 @@ static int usbtv_select_norm(struct usbtv *usbtv, v4l2_std_id norm)
{ USBTV_BASE + 0x0263, 0x001c },
{ USBTV_BASE + 0x0266, 0x0011 },
{ USBTV_BASE + 0x0267, 0x0005 },
/* Epilog */
/* End image tuning */
{ USBTV_BASE + 0x024e, 0x0002 },
{ USBTV_BASE + 0x024f, 0x0002 },
};
......@@ -210,7 +229,7 @@ static int usbtv_select_norm(struct usbtv *usbtv, v4l2_std_id norm)
{ USBTV_BASE + 0x0263, 0x0021 },
{ USBTV_BASE + 0x0266, 0x0016 },
{ USBTV_BASE + 0x0267, 0x0036 },
/* Epilog */
/* End image tuning */
{ USBTV_BASE + 0x024e, 0x0002 },
{ USBTV_BASE + 0x024f, 0x0002 },
};
......@@ -218,12 +237,28 @@ static int usbtv_select_norm(struct usbtv *usbtv, v4l2_std_id norm)
ret = usbtv_configure_for_norm(usbtv, norm);
if (!ret) {
if (norm & V4L2_STD_525_60)
/* Masks for norms using a NTSC or PAL color encoding. */
static const v4l2_std_id ntsc_mask =
V4L2_STD_NTSC | V4L2_STD_NTSC_443;
static const v4l2_std_id pal_mask =
V4L2_STD_PAL | V4L2_STD_PAL_60 | V4L2_STD_PAL_M;
if (norm & ntsc_mask)
ret = usbtv_set_regs(usbtv, ntsc, ARRAY_SIZE(ntsc));
else if (norm & V4L2_STD_PAL)
else if (norm & pal_mask)
ret = usbtv_set_regs(usbtv, pal, ARRAY_SIZE(pal));
else if (norm & V4L2_STD_SECAM)
ret = usbtv_set_regs(usbtv, secam, ARRAY_SIZE(secam));
else
ret = -EINVAL;
}
if (!ret) {
/* Configure the decoder for the color standard */
const u16 cfg[][2] = {
{ USBTV_BASE + 0x016f, usbtv_norm_to_16f_reg(norm) }
};
ret = usbtv_set_regs(usbtv, cfg, ARRAY_SIZE(cfg));
}
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment