s390/dump: Remove CONFIG_ZFCPDUMP

Currently there are two s390 kernel dump config options "CONFIG_ZFCPDUMP"
and "CONFIG_CRASH_DUMP". In order to keep things simple and because the
"CONFIG_ZFCPDUMP" option already has a dependency to "CONFIG_CRASH_DUMP"
remove the CONFIG_ZFCPDUMP option.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Documentation/s390/zfcpdump.txt

@@ -21,7 +21,7 @@ standalone dump format. It can be used in the same way as e.g. /dev/mem. The
 dump format defines a 4K header followed by plain uncompressed memory. The
 register sets are stored in the prefix pages of the respective cpus. To build a
 dump enabled kernel with the zcore driver, the kernel config option
-CONFIG_ZFCPDUMP has to be set. When reading from "zcore/mem", the part of
+CONFIG_CRASH_DUMP has to be set. When reading from "zcore/mem", the part of
 memory, which has been saved by hardware is read by the driver via the SCLP
 hardware interface. The second part is just copied from the non overwritten real
 memory.
@@ -32,7 +32,7 @@ SCSI disk.
 
 To build a zfcpdump kernel use the following settings in your kernel
 configuration:
- * CONFIG_ZFCPDUMP=y
+ * CONFIG_CRASH_DUMP=y
  * Enable ZFCP driver
  * Enable SCSI driver
  * Enable ext2 and ext3 filesystems

arch/s390/Kconfig

@@ -593,21 +593,14 @@ config CRASH_DUMP
 	bool "kernel crash dumps"
 	depends on 64BIT && SMP
 	select KEXEC
-	select ZFCPDUMP
 	help
 	  Generate crash dump after being started by kexec.
 	  Crash dump kernels are loaded in the main kernel with kexec-tools
 	  into a specially reserved region and then later executed after
 	  a crash by kdump/kexec.
-	  For more details see Documentation/kdump/kdump.txt
-
-config ZFCPDUMP
-	def_bool n
-	prompt "zfcpdump support"
-	depends on 64BIT && SMP
-	help
-	  Select this option if you want to build an zfcpdump enabled kernel.
 	  Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
+	  This option also enables s390 zfcpdump.
+	  See also <file:Documentation/s390/zfcpdump.txt>
 
 endmenu
 

arch/s390/kernel/setup.c

@@ -211,7 +211,7 @@ static void __init conmode_default(void)
 	}
 }
 
-#ifdef CONFIG_ZFCPDUMP
+#ifdef CONFIG_CRASH_DUMP
 static void __init setup_zfcpdump(void)
 {
 	if (ipl_info.type != IPL_TYPE_FCP_DUMP)
@@ -223,7 +223,7 @@ static void __init setup_zfcpdump(void)
 }
 #else
 static inline void setup_zfcpdump(void) {}
-#endif /* CONFIG_ZFCPDUMP */
+#endif /* CONFIG_CRASH_DUMP */
 
  /*
  * Reboot, halt and power_off stubs. They just call _machine_restart,
@@ -521,7 +521,7 @@ static struct notifier_block kdump_mem_nb = {
  */
 static void reserve_memory_end(void)
 {
-#ifdef CONFIG_ZFCPDUMP
+#ifdef CONFIG_CRASH_DUMP
 	if (ipl_info.type == IPL_TYPE_FCP_DUMP &&
 	    !OLDMEM_BASE && sclp_get_hsa_size()) {
 		memory_end = sclp_get_hsa_size();

arch/s390/kernel/smp.c

@@ -521,7 +521,7 @@ void smp_ctl_clear_bit(int cr, int bit)
 }
 EXPORT_SYMBOL(smp_ctl_clear_bit);
 
-#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_CRASH_DUMP)
+#ifdef CONFIG_CRASH_DUMP
 
 static void __init smp_get_save_area(int cpu, u16 address)
 {
@@ -536,14 +536,12 @@ static void __init smp_get_save_area(int cpu, u16 address)
 	save_area = dump_save_area_create(cpu);
 	if (!save_area)
 		panic("could not allocate memory for save area\n");
-#ifdef CONFIG_CRASH_DUMP
 	if (address == boot_cpu_address) {
 		/* Copy the registers of the boot cpu. */
 		copy_oldmem_page(1, (void *) save_area, sizeof(*save_area),
 				 SAVE_AREA_BASE - PAGE_SIZE, 0);
 		return;
 	}
-#endif
 	/* Get the registers of a non-boot cpu. */
 	__pcpu_sigp_relax(address, SIGP_STOP_AND_STORE_STATUS, 0, NULL);
 	memcpy_real(save_area, lc + SAVE_AREA_BASE, sizeof(*save_area));
@@ -560,11 +558,11 @@ int smp_store_status(int cpu)
 	return 0;
 }
 
-#else /* CONFIG_ZFCPDUMP || CONFIG_CRASH_DUMP */
+#else /* CONFIG_CRASH_DUMP */
 
 static inline void smp_get_save_area(int cpu, u16 address) { }
 
-#endif /* CONFIG_ZFCPDUMP || CONFIG_CRASH_DUMP */
+#endif /* CONFIG_CRASH_DUMP */
 
 void smp_cpu_set_polarization(int cpu, int val)
 {

drivers/s390/char/Makefile

@@ -33,4 +33,4 @@ obj-$(CONFIG_MONWRITER) += monwriter.o
 obj-$(CONFIG_S390_VMUR) += vmur.o
 
 zcore_mod-objs := sclp_sdias.o zcore.o
-obj-$(CONFIG_ZFCPDUMP) += zcore_mod.o
+obj-$(CONFIG_CRASH_DUMP) += zcore_mod.o