arm64: dts: imx8mn-evk: enable usb1 and typec support

USB1 port has typec connector with power delivery support:
- Dual data role: host and device.
- Dual power role: source and sink, prefer power sink.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi

@@ -3,6 +3,7 @@
  * Copyright 2019 NXP
  */
 
+#include <dt-bindings/usb/pd.h>
 #include "imx8mn.dtsi"
 
 / {
@@ -60,6 +61,42 @@ &i2c1 {
 	status = "okay";
 };
 
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -70,6 +107,21 @@ &uart2 { /* console */
 	status = "okay";
 };
 
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
 &usdhc2 {
 	assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
 	assigned-clock-rates = <200000000>;
@@ -138,12 +190,25 @@ MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
 		>;
 	};
 
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140