ssb/bcma: fill attribute alpha2 from sprom

The attribute country_code and alpha2 are two different attributes in
the sprom. country_code contains some code in an 8 bit coding and
alpha2 contains two chars with the country code. The attributes where
read out wrongly in the past and country_code is only available on
sprom version 1.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/bcma/sprom.c

@@ -243,7 +243,8 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
 	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0);
 	SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0);
 
-	SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0);
+	SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+	SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
 
 	/* Extract cores power info info */
 	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {

drivers/ssb/pci.c

@@ -360,8 +360,9 @@ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
 	SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
 	SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
 	SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
-	SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
-	     SSB_SPROM1_BINF_CCODE_SHIFT);
+	if (out->revision == 1)
+		SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+		     SSB_SPROM1_BINF_CCODE_SHIFT);
 	SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
 	     SSB_SPROM1_BINF_ANTA_SHIFT);
 	SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
@@ -387,6 +388,8 @@ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
 	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
 	if (out->revision >= 2)
 		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
 
 	/* Extract the antenna gain values. */
 	out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
@@ -456,13 +459,15 @@ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
 	SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
 	     SSB_SPROM4_ETHPHY_ET1A_SHIFT);
 	if (out->revision == 4) {
-		SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
+		SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
+		SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
 		SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
 		SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
 		SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
 		SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
 	} else {
-		SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
+		SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
+		SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
 		SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
 		SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
 		SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
@@ -525,7 +530,8 @@ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
 		v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
 		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
 	}
-	SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
+	SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+	SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
 	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
 	SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
 	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);

include/linux/ssb/ssb_regs.h

@@ -228,6 +228,7 @@
 #define  SSB_SPROM1_AGAIN_BG_SHIFT	0
 #define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
 #define  SSB_SPROM1_AGAIN_A_SHIFT	8
+#define SSB_SPROM1_CCODE		0x0076
 
 /* SPROM Revision 2 (inherits from rev 1) */
 #define SSB_SPROM2_BFLHI		0x0038	/* Boardflags (high 16 bits) */