Commit bfae7375 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Florian Fainelli

ARM: BCM5301X: Add DT for Netgear R7000

Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
parent 7b2e987d
......@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-buffalo-wzr-900dhp.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
......
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Netgear R7000
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
#include "bcm4708.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
model = "Netgear R7000";
chosen {
bootargs = "console=ttyS0,115200";
};
memory {
reg = <0x00000000 0x08000000>;
};
leds {
compatible = "gpio-leds";
power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:white:5ghz";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
wireless {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
};
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
};
};
};
&uart0 {
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment