Commit c07f87f2 authored by Ben Dooks's avatar Ben Dooks

[ARM] VIC: Add power management device

Add power management support to the VIC by registering
each VIC as a system device to get suspend/resume
events going.

Since the VIC registeration is done early, we need to
record the VICs in a static array which is used to add
the system devices later once the initcalls are run. This
means there is now a configuration value for the number
of VICs in the system.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent d87964c4
...@@ -4,6 +4,13 @@ config ARM_GIC ...@@ -4,6 +4,13 @@ config ARM_GIC
config ARM_VIC config ARM_VIC
bool bool
config ARM_VIC_NR
int
default 2
help
The maximum number of VICs available in the system, for
power management.
config ICST525 config ICST525
bool bool
......
...@@ -21,6 +21,7 @@ ...@@ -21,6 +21,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/list.h> #include <linux/list.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/sysdev.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/hardware/vic.h> #include <asm/hardware/vic.h>
...@@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq) ...@@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq)
writel(1 << irq, base + VIC_INT_ENABLE); writel(1 << irq, base + VIC_INT_ENABLE);
} }
/**
* vic_init2 - common initialisation code
* @base: Base of the VIC.
*
* Common initialisation code for registeration
* and resume.
*/
static void vic_init2(void __iomem *base)
{
int i;
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
#if defined(CONFIG_PM)
/**
* struct vic_device - VIC PM device
* @sysdev: The system device which is registered.
* @irq: The IRQ number for the base of the VIC.
* @base: The register base for the VIC.
* @resume_sources: A bitmask of interrupts for resume.
* @resume_irqs: The IRQs enabled for resume.
* @int_select: Save for VIC_INT_SELECT.
* @int_enable: Save for VIC_INT_ENABLE.
* @soft_int: Save for VIC_INT_SOFT.
* @protect: Save for VIC_PROTECT.
*/
struct vic_device {
struct sys_device sysdev;
void __iomem *base;
int irq;
u32 resume_sources;
u32 resume_irqs;
u32 int_select;
u32 int_enable;
u32 soft_int;
u32 protect;
};
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
static inline struct vic_device *to_vic(struct sys_device *sys)
{
return container_of(sys, struct vic_device, sysdev);
}
static int vic_id;
static int vic_class_resume(struct sys_device *dev)
{
struct vic_device *vic = to_vic(dev);
void __iomem *base = vic->base;
printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
/* re-initialise static settings */
vic_init2(base);
writel(vic->int_select, base + VIC_INT_SELECT);
writel(vic->protect, base + VIC_PROTECT);
/* set the enabled ints and then clear the non-enabled */
writel(vic->int_enable, base + VIC_INT_ENABLE);
writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
/* and the same for the soft-int register */
writel(vic->soft_int, base + VIC_INT_SOFT);
writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
return 0;
}
static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
{
struct vic_device *vic = to_vic(dev);
void __iomem *base = vic->base;
printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
vic->int_select = readl(base + VIC_INT_SELECT);
vic->int_enable = readl(base + VIC_INT_ENABLE);
vic->soft_int = readl(base + VIC_INT_SOFT);
vic->protect = readl(base + VIC_PROTECT);
/* set the interrupts (if any) that are used for
* resuming the system */
writel(vic->resume_irqs, base + VIC_INT_ENABLE);
writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
return 0;
}
struct sysdev_class vic_class = {
.name = "vic",
.suspend = vic_class_suspend,
.resume = vic_class_resume,
};
/**
* vic_pm_register - Register a VIC for later power management control
* @base: The base address of the VIC.
* @irq: The base IRQ for the VIC.
* @resume_sources: bitmask of interrupts allowed for resume sources.
*
* Register the VIC with the system device tree so that it can be notified
* of suspend and resume requests and ensure that the correct actions are
* taken to re-instate the settings on resume.
*/
static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
{
struct vic_device *v;
if (vic_id >= ARRAY_SIZE(vic_devices))
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
else {
v = &vic_devices[vic_id];
v->base = base;
v->resume_sources = resume_sources;
v->irq = irq;
vic_id++;
}
}
/**
* vic_pm_init - initicall to register VIC pm
*
* This is called via late_initcall() to register
* the resources for the VICs due to the early
* nature of the VIC's registration.
*/
static int __init vic_pm_init(void)
{
struct vic_device *dev = vic_devices;
int err;
int id;
if (vic_id == 0)
return 0;
err = sysdev_class_register(&vic_class);
if (err) {
printk(KERN_ERR "%s: cannot register class\n", __func__);
return err;
}
for (id = 0; id < vic_id; id++, dev++) {
dev->sysdev.id = id;
dev->sysdev.cls = &vic_class;
err = sysdev_register(&dev->sysdev);
if (err) {
printk(KERN_ERR "%s: failed to register device\n",
__func__);
return err;
}
}
return 0;
}
late_initcall(vic_pm_init);
static struct vic_device *vic_from_irq(unsigned int irq)
{
struct vic_device *v = vic_devices;
unsigned int base_irq = irq & ~31;
int id;
for (id = 0; id < vic_id; id++, v++) {
if (v->irq == base_irq)
return v;
}
return NULL;
}
static int vic_set_wake(unsigned int irq, unsigned int on)
{
struct vic_device *v = vic_from_irq(irq);
unsigned int off = irq & 31;
if (!v)
return -EINVAL;
if (on)
v->resume_irqs |= 1 << off;
else
v->resume_irqs &= ~(1 << off);
return 0;
}
#else
static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
#define vic_set_wake NULL
#endif /* CONFIG_PM */
static struct irq_chip vic_chip = { static struct irq_chip vic_chip = {
.name = "VIC", .name = "VIC",
.ack = vic_mask_irq, .ack = vic_mask_irq,
.mask = vic_mask_irq, .mask = vic_mask_irq,
.unmask = vic_unmask_irq, .unmask = vic_unmask_irq,
.set_wake = vic_set_wake,
}; };
/** /**
...@@ -51,9 +260,10 @@ static struct irq_chip vic_chip = { ...@@ -51,9 +260,10 @@ static struct irq_chip vic_chip = {
* @base: iomem base address * @base: iomem base address
* @irq_start: starting interrupt number, must be muliple of 32 * @irq_start: starting interrupt number, must be muliple of 32
* @vic_sources: bitmask of interrupt sources to allow * @vic_sources: bitmask of interrupt sources to allow
* @resume_sources: bitmask of interrupt sources to allow for resume
*/ */
void __init vic_init(void __iomem *base, unsigned int irq_start, void __init vic_init(void __iomem *base, unsigned int irq_start,
u32 vic_sources) u32 vic_sources, u32 resume_sources)
{ {
unsigned int i; unsigned int i;
...@@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, ...@@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
writel(value, base + VIC_PL190_VECT_ADDR); writel(value, base + VIC_PL190_VECT_ADDR);
} }
for (i = 0; i < 16; i++) { vic_init2(base);
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
for (i = 0; i < 32; i++) { for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) { if (vic_sources & (1 << i)) {
...@@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, ...@@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
} }
} }
vic_pm_register(base, irq_start, resume_sources);
} }
...@@ -41,7 +41,7 @@ ...@@ -41,7 +41,7 @@
#define VIC_PL192_VECT_ADDR 0xF00 #define VIC_PL192_VECT_ADDR 0xF00
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources); void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
#endif #endif
#endif #endif
...@@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void) ...@@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void)
{ {
int gpio_irq; int gpio_irq;
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK); vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK); vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
for (gpio_irq = gpio_to_irq(0); for (gpio_irq = gpio_to_irq(0);
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
......
...@@ -168,7 +168,7 @@ void __init netx_init_irq(void) ...@@ -168,7 +168,7 @@ void __init netx_init_irq(void)
{ {
int irq; int irq;
vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0); vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0);
for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) { for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
set_irq_chip(irq, &netx_hif_chip); set_irq_chip(irq, &netx_hif_chip);
......
...@@ -116,7 +116,7 @@ void __init versatile_init_irq(void) ...@@ -116,7 +116,7 @@ void __init versatile_init_irq(void)
{ {
unsigned int i; unsigned int i;
vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0); vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq); set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
......
...@@ -232,8 +232,8 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) ...@@ -232,8 +232,8 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
/* initialise the pair of VICs */ /* initialise the pair of VICs */
vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid); vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid); vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
/* add the timer sub-irqs */ /* add the timer sub-irqs */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment