serial: sh-sci: Add SCIFA/B SCPCR register definitions

Add the register definitions for the Serial Port Control and Data
Registers on SCIFA/SCIFB, which are needed for RTS/CTS pin control.

Extracted from patches by Magnus Damm <damm+renesas@opensource.se>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/sh-sci.c

@@ -168,6 +168,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -188,6 +190,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -207,6 +211,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= { 0x30, 16 },
+		[SCPDR]		= { 0x34, 16 },
 	},
 
 	/*
@@ -226,6 +232,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= { 0x30, 16 },
+		[SCPDR]		= { 0x34, 16 },
 	},
 
 	/*
@@ -246,6 +254,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -265,6 +275,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -284,6 +296,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -303,6 +317,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
 		[HSSRR]		= { 0x40, 16 },
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -323,6 +339,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= { 0x24, 16 },
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -343,6 +361,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= { 0x24, 16 },
 		[SCLSR]		= { 0x28, 16 },
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -363,6 +383,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 		[HSSRR]		= sci_reg_invalid,
+		[SCPCR]		= sci_reg_invalid,
+		[SCPDR]		= sci_reg_invalid,
 	},
 };
 

drivers/tty/serial/sh-sci.h

@@ -24,6 +24,8 @@ enum {
 	SCRFDR,				/* Receive FIFO Data Count Register */
 	SCSPTR,				/* Serial Port Register */
 	HSSRR,				/* Sampling Rate Register */
+	SCPCR,				/* Serial Port Control Register */
+	SCPDR,				/* Serial Port Data Register */
 
 	SCIx_NR_REGS,
 };
@@ -79,6 +81,14 @@ enum {
 /* HSSRR HSCIF */
 #define HSCIF_SRE	0x8000		/* Sampling Rate Register Enable */
 
+/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
+#define SCPCR_RTSC	(1 << 4)	/* Serial Port RTS Pin / Output Pin */
+#define SCPCR_CTSC	(1 << 3)	/* Serial Port CTS Pin / Input Pin */
+
+/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
+#define SCPDR_RTSD	(1 << 4)	/* Serial Port RTS Output Pin Data */
+#define SCPDR_CTSD	(1 << 3)	/* Serial Port CTS Input Pin Data */
+
 
 #define SCxSR_TEND(port)	(((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
 #define SCxSR_RDxF(port)	(((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)