arm64: dts: msm8916: fix gic_irq_domain_translate warnings

Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Thierry Escande <thierry.escande@linaro.org>
Tested-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -179,7 +179,7 @@ psci {
 
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	thermal-zones {
@@ -512,7 +512,7 @@ blsp_spi6: spi@78ba000 {
 		blsp_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b6000 0x500>;
-			interrupts = <GIC_SPI 96 0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
@@ -527,7 +527,7 @@ blsp_i2c2: i2c@78b6000 {
 		blsp_i2c4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b8000 0x500>;
-			interrupts = <GIC_SPI 98 0>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
@@ -542,7 +542,7 @@ blsp_i2c4: i2c@78b8000 {
 		blsp_i2c6: i2c@78ba000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078ba000 0x500>;
-			interrupts = <GIC_SPI 100 0>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
@@ -574,7 +574,7 @@ lpass: lpass@7708000 {
 					"mi2s-bit-clk3";
 			#sound-dai-cells = <1>;
 
-			interrupts = <0 160 0>;
+			interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "lpass-irq-lpaif";
 			reg = <0x07708000 0x10000>;
 			reg-names = "lpass-lpaif";
@@ -594,7 +594,7 @@ sdhc_1: sdhci@7824000 {
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
 			reg-names = "hc_mem", "core_mem";
 
-			interrupts = <0 123 0>, <0 138 0>;
+			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&gcc GCC_SDCC1_AHB_CLK>,
@@ -611,7 +611,7 @@ sdhc_2: sdhci@7864000 {
 			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
 			reg-names = "hc_mem", "core_mem";
 
-			interrupts = <0 125 0>, <0 221 0>;
+			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&gcc GCC_SDCC2_AHB_CLK>,
@@ -818,7 +818,7 @@ iommu-ctx@1000 {
 			iommu-ctx@2000 {
 				compatible = "qcom,msm-iommu-v1-ns";
 				reg = <0x2000 0x1000>;
-				interrupts = <GIC_SPI 242 0>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -862,7 +862,7 @@ mdss: mdss@1a00000 {
 				      "bus_clk",
 				      "vsync_clk";
 
-			interrupts = <0 72 0>;
+			interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;