Commit c1a43d97 authored by Michal Kazior's avatar Michal Kazior Committed by Kalle Valo

ath10k: implement updating shared htt txq state

Firmware 10.4.3 onwards can support a pull-push Tx
model where it shares a Tx queue state with the
host.

The host updates the DMA region it pointed to
during HTT setup whenever number of software
queued from (on host) changes. Based on this
information firmware issues fetch requests to the
host telling the host how many frames from a list
of given stations/tids should be submitted to the
firmware.

The code won't be called because not all
appropriate HTT events are processed yet.
Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent 29946878
......@@ -1667,6 +1667,7 @@ struct ath10k_htt {
} txbuf;
struct {
bool enabled;
struct htt_q_state *vaddr;
dma_addr_t paddr;
u16 num_peers;
......@@ -1758,6 +1759,8 @@ int ath10k_htt_tx_fetch_resp(struct ath10k *ar,
struct htt_tx_fetch_record *records,
size_t num_records);
void ath10k_htt_tx_txq_update(struct ieee80211_hw *hw,
struct ieee80211_txq *txq);
void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt,
bool is_mgmt);
int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt,
......
......@@ -22,6 +22,110 @@
#include "txrx.h"
#include "debug.h"
static u8 ath10k_htt_tx_txq_calc_size(size_t count)
{
int exp;
int factor;
exp = 0;
factor = count >> 7;
while (factor >= 64 && exp < 4) {
factor >>= 3;
exp++;
}
if (exp == 4)
return 0xff;
if (count > 0)
factor = max(1, factor);
return SM(exp, HTT_TX_Q_STATE_ENTRY_EXP) |
SM(factor, HTT_TX_Q_STATE_ENTRY_FACTOR);
}
static void __ath10k_htt_tx_txq_recalc(struct ieee80211_hw *hw,
struct ieee80211_txq *txq)
{
struct ath10k *ar = hw->priv;
struct ath10k_sta *arsta = (void *)txq->sta->drv_priv;
struct ath10k_vif *arvif = (void *)txq->vif->drv_priv;
unsigned long frame_cnt;
unsigned long byte_cnt;
int idx;
u32 bit;
u16 peer_id;
u8 tid;
u8 count;
lockdep_assert_held(&ar->htt.tx_lock);
if (!ar->htt.tx_q_state.enabled)
return;
if (txq->sta)
peer_id = arsta->peer_id;
else
peer_id = arvif->peer_id;
tid = txq->tid;
bit = BIT(peer_id % 32);
idx = peer_id / 32;
ieee80211_txq_get_depth(txq, &frame_cnt, &byte_cnt);
count = ath10k_htt_tx_txq_calc_size(byte_cnt);
if (unlikely(peer_id >= ar->htt.tx_q_state.num_peers) ||
unlikely(tid >= ar->htt.tx_q_state.num_tids)) {
ath10k_warn(ar, "refusing to update txq for peer_id %hu tid %hhu due to out of bounds\n",
peer_id, tid);
return;
}
ar->htt.tx_q_state.vaddr->count[tid][peer_id] = count;
ar->htt.tx_q_state.vaddr->map[tid][idx] &= ~bit;
ar->htt.tx_q_state.vaddr->map[tid][idx] |= count ? bit : 0;
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx txq state update peer_id %hu tid %hhu count %hhu\n",
peer_id, tid, count);
}
static void __ath10k_htt_tx_txq_sync(struct ath10k *ar)
{
u32 seq;
size_t size;
lockdep_assert_held(&ar->htt.tx_lock);
if (!ar->htt.tx_q_state.enabled)
return;
seq = le32_to_cpu(ar->htt.tx_q_state.vaddr->seq);
seq++;
ar->htt.tx_q_state.vaddr->seq = cpu_to_le32(seq);
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx txq state update commit seq %u\n",
seq);
size = sizeof(*ar->htt.tx_q_state.vaddr);
dma_sync_single_for_device(ar->dev,
ar->htt.tx_q_state.paddr,
size,
DMA_TO_DEVICE);
}
void ath10k_htt_tx_txq_update(struct ieee80211_hw *hw,
struct ieee80211_txq *txq)
{
struct ath10k *ar = hw->priv;
spin_lock_bh(&ar->htt.tx_lock);
__ath10k_htt_tx_txq_recalc(hw, txq);
__ath10k_htt_tx_txq_sync(ar);
spin_unlock_bh(&ar->htt.tx_lock);
}
void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt,
bool is_mgmt)
{
......
......@@ -3725,6 +3725,7 @@ void ath10k_mac_tx_push_pending(struct ath10k *ar)
}
list_del_init(&artxq->list);
ath10k_htt_tx_txq_update(hw, txq);
if (artxq == last || (ret < 0 && ret != -ENOENT)) {
if (ret != -ENOENT)
......@@ -3967,6 +3968,8 @@ static void ath10k_mac_op_wake_tx_queue(struct ieee80211_hw *hw,
tasklet_schedule(&ar->htt.txrx_compl_task);
}
ath10k_htt_tx_txq_update(hw, txq);
}
/* Must not be called with conf_mutex held as workers can use that also. */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment