Commit c257628d authored by Fabrizio Castro's avatar Fabrizio Castro Committed by Simon Horman

arm64: dts: renesas: Initial device tree for r8a774c0

Basic support for the RZ/G2E SoC (a.k.a. r8a774c0).
Signed-off-by: default avatarFabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 7eda14af
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the RZ/G2E (R8A774C0) SoC
*
* Copyright (C) 2018 Renesas Electronics Corp.
*/
#include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a774c0-sysc.h>
/ {
compatible = "renesas,r8a774c0";
#address-cells = <2>;
#size-cells = <2>;
/*
* The external audio clocks are configured as 0 Hz fixed frequency
* clocks by default.
* Boards that provide audio clocks should override them.
*/
audio_clk_a: audio_clk_a {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
audio_clk_b: audio_clk_b {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
audio_clk_c: audio_clk_c {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
/* External CAN clock - to be overridden by boards that provide it */
can_clk: can {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
/* 1 core only at this point */
a53_0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0>;
device_type = "cpu";
power-domains = <&sysc R8A774C0_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
};
L2_CA53: cache-controller-0 {
compatible = "cache";
power-domains = <&sysc R8A774C0_PD_CA53_SCU>;
cache-unified;
cache-level = <2>;
};
};
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
/* External PCIe clock - can be overridden by the board */
pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
pmu_a53 {
compatible = "arm,cortex-a53-pmu";
interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&a53_0>;
};
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
};
/* External SCIF clock - to be overridden by boards that provide it */
scif_clk: scif {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a774c0-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
clocks = <&extal_clk>;
clock-names = "extal";
#clock-cells = <2>;
#power-domain-cells = <0>;
#reset-cells = <1>;
};
rst: reset-controller@e6160000 {
compatible = "renesas,r8a774c0-rst";
reg = <0 0xe6160000 0 0x0200>;
};
sysc: system-controller@e6180000 {
compatible = "renesas,r8a774c0-sysc";
reg = <0 0xe6180000 0 0x0400>;
#power-domain-cells = <1>;
};
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a774c0",
"renesas,rcar-gen3-scif", "renesas,scif";
reg = <0 0xe6e88000 0 64>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 310>,
<&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 310>;
status = "disabled";
};
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x0 0xf1010000 0 0x1000>,
<0x0 0xf1020000 0 0x20000>,
<0x0 0xf1040000 0 0x20000>,
<0x0 0xf1060000 0 0x20000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
/* External USB clocks - can be overridden by the board */
usb3s0_clk: usb3s0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
usb_extal_clk: usb_extal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment