Commit c2ef355b authored by Andres Salomon's avatar Andres Salomon Committed by John W. Linville

mac80211: give warning if building w/out rate ctrl algorithm

I discovered that if EMBEDDED=y, one can accidentally build a mac80211 stack
and drivers w/ no rate control algorithm.  For drivers like RTL8187 that don't
supply their own RC algorithms, this will cause ieee80211_register_hw to
fail (making the driver unusable).

This will tell kconfig to provide a warning if no rate control algorithms
have been selected.  That'll at least warn the user; users that know that
their drivers supply a rate control algorithm can safely ignore the
warning, and those who don't know (or who expect to be using multiple
drivers) can select a default RC algorithm.
Signed-off-by: default avatarAndres Salomon <dilinger@collabora.co.uk>
Cc: stable@kernel.org
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 1da3f882
......@@ -15,8 +15,12 @@ comment "CFG80211 needs to be enabled for MAC80211"
if MAC80211 != n
config MAC80211_HAS_RC
def_bool n
config MAC80211_RC_PID
bool "PID controller based rate control algorithm" if EMBEDDED
select MAC80211_HAS_RC
---help---
This option enables a TX rate control algorithm for
mac80211 that uses a PID controller to select the TX
......@@ -24,12 +28,14 @@ config MAC80211_RC_PID
config MAC80211_RC_MINSTREL
bool "Minstrel" if EMBEDDED
select MAC80211_HAS_RC
default y
---help---
This option enables the 'minstrel' TX rate control algorithm
choice
prompt "Default rate control algorithm"
depends on MAC80211_HAS_RC
default MAC80211_RC_DEFAULT_MINSTREL
---help---
This option selects the default rate control algorithm
......@@ -62,6 +68,9 @@ config MAC80211_RC_DEFAULT
endif
comment "Some wireless drivers require a rate control algorithm"
depends on MAC80211_HAS_RC=n
config MAC80211_MESH
bool "Enable mac80211 mesh networking (pre-802.11s) support"
depends on MAC80211 && EXPERIMENTAL
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment