Merge tag 'mvebu-arm-5.2-1' of git://git.infradead.org/linux-mvebu into arm/late

mvebu arm for 5.2 (part 1)

 - remove improper error message on kirkwood
 - a couple a clean-up patch generated from automatic tools
 - clean-up in assembly code allowing using LLVM

* tag 'mvebu-arm-5.2-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: drop return from void function
  ARM: mvebu: prefix coprocessor operand with p
  ARM: mvebu: drop unnecessary label
  ARM: mvebu: fix a leaked reference by adding missing of_node_put
  ARM: mvebu: kirkwood: remove error message when retrieving mac address
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-mvebu/board-v7.c

@@ -136,7 +136,6 @@ static void __init i2c_quirk(void)
 
 		of_update_property(np, new_compat);
 	}
-	return;
 }
 
 static void __init mvebu_dt_init(void)

arch/arm/mach-mvebu/coherency_ll.S

@@ -66,7 +66,7 @@ ENDPROC(ll_get_coherency_base)
  * fabric registers
  */
 ENTRY(ll_get_coherency_cpumask)
-	mrc	15, 0, r3, cr0, cr0, 5
+	mrc	p15, 0, r3, cr0, cr0, 5
 	and	r3, r3, #15
 	mov	r2, #(1 << 24)
 	lsl	r3, r2, r3

arch/arm/mach-mvebu/kirkwood.c

@@ -108,8 +108,6 @@ static void __init kirkwood_dt_eth_fixup(void)
 		clk_prepare_enable(clk);
 
 		/* store MAC address register contents in local-mac-address */
-		pr_err(FW_INFO "%pOF: local-mac-address is not set\n", np);
-
 		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
 		if (!pmac)
 			goto eth_fixup_no_mem;

arch/arm/mach-mvebu/pm-board.c

@@ -79,7 +79,7 @@ static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd)
 static int __init mvebu_armada_pm_init(void)
 {
 	struct device_node *np;
-	struct device_node *gpio_ctrl_np;
+	struct device_node *gpio_ctrl_np = NULL;
 	int ret = 0, i;
 
 	if (!of_machine_is_compatible("marvell,axp-gp"))
@@ -126,18 +126,23 @@ static int __init mvebu_armada_pm_init(void)
 			goto out;
 		}
 
+		if (gpio_ctrl_np)
+			of_node_put(gpio_ctrl_np);
 		gpio_ctrl_np = args.np;
 		pic_raw_gpios[i] = args.args[0];
 	}
 
 	gpio_ctrl = of_iomap(gpio_ctrl_np, 0);
-	if (!gpio_ctrl)
-		return -ENOMEM;
+	if (!gpio_ctrl) {
+		ret = -ENOMEM;
+		goto out;
+	}
 
 	mvebu_pm_suspend_init(mvebu_armada_pm_enter);
 
 out:
 	of_node_put(np);
+	of_node_put(gpio_ctrl_np);
 	return ret;
 }
 

arch/arm/mach-mvebu/pmsu_ll.S

@@ -16,7 +16,7 @@
 ENTRY(armada_38x_scu_power_up)
 	mrc     p15, 4, r1, c15, c0	@ get SCU base address
 	orr	r1, r1, #0x8		@ SCU CPU Power Status Register
-	mrc	15, 0, r0, cr0, cr0, 5	@ get the CPU ID
+	mrc	p15, 0, r0, cr0, cr0, 5	@ get the CPU ID
 	and	r0, r0, #15
 	add	r1, r1, r0
 	mov	r0, #0x0
@@ -56,7 +56,6 @@ ENDPROC(armada_38x_cpu_resume)
 
 /* The following code will be executed from SRAM */
 ENTRY(mvebu_boot_wa_start)
-mvebu_boot_wa_start:
 ARM_BE8(setend	be)
 	adr	r0, 1f
 	ldr	r0, [r0]		@ load the address of the