Commit c415022e authored by Takashi Iwai's avatar Takashi Iwai

ALSA: x86: Drop superfluous CHT PCI ID check

Since the config base offset is now set per pipe id, we don't have to
check Cherry Trail PCI IDs any longer.  Currently it's used only for
debug prints.  Let's drop it.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 5647aec2
...@@ -306,13 +306,6 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) ...@@ -306,13 +306,6 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)
void __iomem *mmio_start; void __iomem *mmio_start;
int ret = 0; int ret = 0;
unsigned long flag_irq; unsigned long flag_irq;
static const struct pci_device_id cherryview_ids[] = {
{PCI_DEVICE(0x8086, 0x22b0)},
{PCI_DEVICE(0x8086, 0x22b1)},
{PCI_DEVICE(0x8086, 0x22b2)},
{PCI_DEVICE(0x8086, 0x22b3)},
{}
};
dev_dbg(&pdev->dev, "Enter %s\n", __func__); dev_dbg(&pdev->dev, "Enter %s\n", __func__);
dev_dbg(&pdev->dev, "dma_mask: %p\n", pdev->dev.dma_mask); dev_dbg(&pdev->dev, "dma_mask: %p\n", pdev->dev.dma_mask);
...@@ -356,13 +349,6 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) ...@@ -356,13 +349,6 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)
INIT_WORK(&ctx->hdmi_audio_wq, _had_wq); INIT_WORK(&ctx->hdmi_audio_wq, _had_wq);
ctx->state = hdmi_connector_status_disconnected; ctx->state = hdmi_connector_status_disconnected;
if (pci_dev_present(cherryview_ids))
dev_dbg(&pdev->dev, "%s: Cherrytrail LPE - Detected\n",
__func__);
else
dev_dbg(&pdev->dev, "%s: Baytrail LPE - Assume\n",
__func__);
/* assume pipe A as default */ /* assume pipe A as default */
ctx->had_config_offset = AUDIO_HDMI_CONFIG_A; ctx->had_config_offset = AUDIO_HDMI_CONFIG_A;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment