Commit c46ac946 authored by Florian Westphal's avatar Florian Westphal Committed by Jeff Garzik

DM9000: fix interface hang under load

When transferring data at full speed, the DM9000 network interface
sometimes stops sending/receiving data. Worse, ksoftirqd consumes
100% cpu and the net tx watchdog never triggers.
Fix by spin_lock_irqsave() in dm9000_start_xmit() to prevent the
interrupt handler from interfering.
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent bc1e0a09
......@@ -700,6 +700,7 @@ dm9000_init_dm9000(struct net_device *dev)
static int
dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
board_info_t *db = (board_info_t *) dev->priv;
PRINTK3("dm9000_start_xmit\n");
......@@ -707,10 +708,7 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (db->tx_pkt_cnt > 1)
return 1;
netif_stop_queue(dev);
/* Disable all interrupts */
iow(db, DM9000_IMR, IMR_PAR);
spin_lock_irqsave(&db->lock, flags);
/* Move data to DM9000 TX RAM */
writeb(DM9000_MWCMD, db->io_addr);
......@@ -718,12 +716,9 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
(db->outblk)(db->io_data, skb->data, skb->len);
db->stats.tx_bytes += skb->len;
db->tx_pkt_cnt++;
/* TX control: First packet immediately send, second packet queue */
if (db->tx_pkt_cnt == 0) {
/* First Packet */
db->tx_pkt_cnt++;
if (db->tx_pkt_cnt == 1) {
/* Set TX length to DM9000 */
iow(db, DM9000_TXPLL, skb->len & 0xff);
iow(db, DM9000_TXPLH, (skb->len >> 8) & 0xff);
......@@ -732,23 +727,17 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
iow(db, DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
dev->trans_start = jiffies; /* save the time stamp */
} else {
/* Second packet */
db->tx_pkt_cnt++;
db->queue_pkt_len = skb->len;
netif_stop_queue(dev);
}
spin_unlock_irqrestore(&db->lock, flags);
/* free this SKB */
dev_kfree_skb(skb);
/* Re-enable resource check */
if (db->tx_pkt_cnt == 1)
netif_wake_queue(dev);
/* Re-enable interrupt */
iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment