Commit c47ae034 authored by Adrian Hunter's avatar Adrian Hunter Committed by Ben Hutchings

mmc: mmc: Fix partition switch timeout for some eMMCs

commit 1c447116 upstream.

Some eMMCs set the partition switch timeout too low.

Now typically eMMCs are considered a critical component (e.g. because
they store the root file system) and consequently are expected to be
reliable.  Thus we can neglect the use case where eMMCs can't switch
reliably and we might want a lower timeout to facilitate speedy
recovery.

Although we could employ a quirk for the cards that are affected (if
we could identify them all), as described above, there is little
benefit to having a low timeout, so instead simply set a minimum
timeout.

The minimum is set to 300ms somewhat arbitrarily - the examples that
have been seen had a timeout of 10ms but were sometimes taking 60-70ms.
Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
parent 8e009bc2
...@@ -298,6 +298,9 @@ static void mmc_select_card_type(struct mmc_card *card) ...@@ -298,6 +298,9 @@ static void mmc_select_card_type(struct mmc_card *card)
card->mmc_avail_type = avail_type; card->mmc_avail_type = avail_type;
} }
/* Minimum partition switch timeout in milliseconds */
#define MMC_MIN_PART_SWITCH_TIME 300
/* /*
* Decode extended CSD. * Decode extended CSD.
*/ */
...@@ -362,6 +365,10 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) ...@@ -362,6 +365,10 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
/* EXT_CSD value is in units of 10ms, but we store in ms */ /* EXT_CSD value is in units of 10ms, but we store in ms */
card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME]; card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME];
/* Some eMMC set the value too low so set a minimum */
if (card->ext_csd.part_time &&
card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME)
card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME;
/* Sleep / awake timeout in 100ns units */ /* Sleep / awake timeout in 100ns units */
if (sa_shift > 0 && sa_shift <= 0x17) if (sa_shift > 0 && sa_shift <= 0x17)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment