Commit c4ac3719 authored by Richard Fitzgerald's avatar Richard Fitzgerald Committed by Lee Jones

Documentation: devicetree: arizona: Add bindings for WM8280

Signed-off-by: default avatarRichard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: default avatarCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent e5d4ef0d
...@@ -8,6 +8,7 @@ Required properties: ...@@ -8,6 +8,7 @@ Required properties:
- compatible : One of the following chip-specific strings: - compatible : One of the following chip-specific strings:
"wlf,wm5102" "wlf,wm5102"
"wlf,wm5110" "wlf,wm5110"
"wlf,wm8280"
"wlf,wm8997" "wlf,wm8997"
- reg : I2C slave address when connected using I2C, chip select number when - reg : I2C slave address when connected using I2C, chip select number when
using SPI. using SPI.
...@@ -26,10 +27,16 @@ Required properties: ...@@ -26,10 +27,16 @@ Required properties:
- #gpio-cells : Must be 2. The first cell is the pin number and the - #gpio-cells : Must be 2. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused). second cell is used to specify optional parameters (currently unused).
- AVDD-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply (wm5102, wm5110), - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device,
CPVDD-supply, SPKVDDL-supply (wm5102, wm5110), SPKVDDR-supply (wm5102, as covered in Documentation/devicetree/bindings/regulator/regulator.txt
wm5110), SPKVDD-supply (wm8997) : Power supplies for the device, as covered
in Documentation/devicetree/bindings/regulator/regulator.txt - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
wm5110, wm8280)
- SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
wm5110, wm8280)
- SPKVDD-supply : Speaker driver power supply (wm8997)
Optional properties: Optional properties:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment