Commit c4e7ac5d authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  e1000: Add device IDs of new 82571 board variants
  xen-netfront: Avoid deref'ing skbafter it is potentially freed.
  3c59x maintainer
  3c59x: fix duplex configuration
  natsemi: fix netdev error acounting
  ax88796 printk fixes
  myri10ge: Use the pause counter to avoid a needless device reset
  via-rhine: disable rx_copybreak on archs that don't allow unaligned DMA access
parents c019b193 ce57a02c
......@@ -97,6 +97,12 @@ M: philb@gnu.org
L: netdev@vger.kernel.org
S: Maintained
3C59X NETWORK DRIVER
P: Steffen Klassert
M: klassert@mathematik.tu-chemnitz.de
L: netdev@vger.kernel.org
S: Maintained
3CR990 NETWORK DRIVER
P: David Dillow
M: dave@thedillows.org
......
......@@ -1555,6 +1555,7 @@ vortex_up(struct net_device *dev)
mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR);
mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0);
vp->mii.full_duplex = vp->full_duplex;
vortex_check_media(dev, 1);
}
......
......@@ -821,8 +821,9 @@ static int ax_probe(struct platform_device *pdev)
dev->base_addr = (unsigned long)ei_status.mem;
if (ei_status.mem == NULL) {
dev_err(&pdev->dev, "Cannot ioremap area (%08zx,%08zx)\n",
res->start, res->end);
dev_err(&pdev->dev, "Cannot ioremap area (%08llx,%08llx)\n",
(unsigned long long)res->start,
(unsigned long long)res->end);
ret = -ENXIO;
goto exit_req;
......
......@@ -1706,6 +1706,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol
case E1000_DEV_ID_82545EM_COPPER:
case E1000_DEV_ID_82546GB_QUAD_COPPER:
case E1000_DEV_ID_82546GB_PCIE:
case E1000_DEV_ID_82571EB_SERDES_QUAD:
/* these don't support WoL at all */
wol->supported = 0;
break;
......@@ -1723,6 +1724,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol
retval = 0;
break;
case E1000_DEV_ID_82571EB_QUAD_COPPER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
/* quad port adapters only support WoL on port A */
......
......@@ -384,7 +384,10 @@ e1000_set_mac_type(struct e1000_hw *hw)
case E1000_DEV_ID_82571EB_COPPER:
case E1000_DEV_ID_82571EB_FIBER:
case E1000_DEV_ID_82571EB_SERDES:
case E1000_DEV_ID_82571EB_SERDES_DUAL:
case E1000_DEV_ID_82571EB_SERDES_QUAD:
case E1000_DEV_ID_82571EB_QUAD_COPPER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
hw->mac_type = e1000_82571;
break;
......@@ -485,6 +488,8 @@ e1000_set_media_type(struct e1000_hw *hw)
case E1000_DEV_ID_82545GM_SERDES:
case E1000_DEV_ID_82546GB_SERDES:
case E1000_DEV_ID_82571EB_SERDES:
case E1000_DEV_ID_82571EB_SERDES_DUAL:
case E1000_DEV_ID_82571EB_SERDES_QUAD:
case E1000_DEV_ID_82572EI_SERDES:
case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
hw->media_type = e1000_media_type_internal_serdes;
......
......@@ -475,7 +475,10 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
#define E1000_DEV_ID_82571EB_FIBER 0x105F
#define E1000_DEV_ID_82571EB_SERDES 0x1060
#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC
#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
#define E1000_DEV_ID_82572EI_COPPER 0x107D
#define E1000_DEV_ID_82572EI_FIBER 0x107E
#define E1000_DEV_ID_82572EI_SERDES 0x107F
......
......@@ -100,6 +100,7 @@ static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x1099),
INTEL_E1000_ETHERNET_DEVICE(0x109A),
INTEL_E1000_ETHERNET_DEVICE(0x10A4),
INTEL_E1000_ETHERNET_DEVICE(0x10A5),
INTEL_E1000_ETHERNET_DEVICE(0x10B5),
INTEL_E1000_ETHERNET_DEVICE(0x10B9),
INTEL_E1000_ETHERNET_DEVICE(0x10BA),
......@@ -107,6 +108,8 @@ static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x10BC),
INTEL_E1000_ETHERNET_DEVICE(0x10C4),
INTEL_E1000_ETHERNET_DEVICE(0x10C5),
INTEL_E1000_ETHERNET_DEVICE(0x10D9),
INTEL_E1000_ETHERNET_DEVICE(0x10DA),
/* required last entry */
{0,}
};
......@@ -1096,6 +1099,7 @@ e1000_probe(struct pci_dev *pdev,
break;
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
case E1000_DEV_ID_82571EB_QUAD_COPPER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
/* if quad port adapter, disable WoL on all but port A */
if (global_quad_port_a != 0)
......
......@@ -191,6 +191,7 @@ struct myri10ge_priv {
struct timer_list watchdog_timer;
int watchdog_tx_done;
int watchdog_tx_req;
int watchdog_pause;
int watchdog_resets;
int tx_linearized;
int pause;
......@@ -2800,6 +2801,7 @@ static void myri10ge_watchdog(struct work_struct *work)
static void myri10ge_watchdog_timer(unsigned long arg)
{
struct myri10ge_priv *mgp;
u32 rx_pause_cnt;
mgp = (struct myri10ge_priv *)arg;
......@@ -2816,19 +2818,28 @@ static void myri10ge_watchdog_timer(unsigned long arg)
myri10ge_fill_thresh)
mgp->rx_big.watchdog_needed = 0;
}
rx_pause_cnt = ntohl(mgp->fw_stats->dropped_pause);
if (mgp->tx.req != mgp->tx.done &&
mgp->tx.done == mgp->watchdog_tx_done &&
mgp->watchdog_tx_req != mgp->watchdog_tx_done)
mgp->watchdog_tx_req != mgp->watchdog_tx_done) {
/* nic seems like it might be stuck.. */
schedule_work(&mgp->watchdog_work);
else
/* rearm timer */
mod_timer(&mgp->watchdog_timer,
jiffies + myri10ge_watchdog_timeout * HZ);
if (rx_pause_cnt != mgp->watchdog_pause) {
if (net_ratelimit())
printk(KERN_WARNING "myri10ge %s:"
"TX paused, check link partner\n",
mgp->dev->name);
} else {
schedule_work(&mgp->watchdog_work);
return;
}
}
/* rearm timer */
mod_timer(&mgp->watchdog_timer,
jiffies + myri10ge_watchdog_timeout * HZ);
mgp->watchdog_tx_done = mgp->tx.done;
mgp->watchdog_tx_req = mgp->tx.req;
mgp->watchdog_pause = rx_pause_cnt;
}
static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
......
......@@ -2438,13 +2438,16 @@ static void netdev_error(struct net_device *dev, int intr_status)
dev->name);
}
np->stats.rx_fifo_errors++;
np->stats.rx_errors++;
}
/* Hmmmmm, it's not clear how to recover from PCI faults. */
if (intr_status & IntrPCIErr) {
printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name,
intr_status & IntrPCIErr);
np->stats.tx_fifo_errors++;
np->stats.tx_errors++;
np->stats.rx_fifo_errors++;
np->stats.rx_errors++;
}
spin_unlock(&np->lock);
}
......
......@@ -42,7 +42,13 @@ static int max_interrupt_work = 20;
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
Setting to > 1518 effectively disables this feature. */
#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
|| defined(CONFIG_SPARC) || defined(__ia64__) \
|| defined(__sh__) || defined(__mips__)
static int rx_copybreak = 1518;
#else
static int rx_copybreak;
#endif
/* Work-around for broken BIOSes: they are unable to get the chip back out of
power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
......
......@@ -566,6 +566,10 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (notify)
notify_remote_via_irq(np->netdev->irq);
np->stats.tx_bytes += skb->len;
np->stats.tx_packets++;
/* Note: It is not safe to access skb after xennet_tx_buf_gc()! */
xennet_tx_buf_gc(dev);
if (!netfront_tx_slot_available(np))
......@@ -573,9 +577,6 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
spin_unlock_irq(&np->tx_lock);
np->stats.tx_bytes += skb->len;
np->stats.tx_packets++;
return 0;
drop:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment