8250_pci: fix pch uart matching

commit aaa10eb1 upstream.

The rules used to make 8250_pci "ignore" the PCH uarts are lacking pci subids
entries, preventing it to match and thus is breaking serial port support for
theses systems.

This has been tested on a nanoETXexpress-TT, which has a specifici uart clock.
Tested-by: Erwan Velu <Erwan.Velu@zodiacaerospace.com>
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drivers/tty/serial/8250_pci.c

@@ -1590,54 +1590,72 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8811,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8812,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8813,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8814,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8027,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8028,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8029,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x800C,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x800D,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},