i2c: designware: Discard Cherry Trail model flag

A PM workaround activated by the flag MODEL_CHERRYTRAIL has been removed
since commit 9cbeeca0 ("i2c: designware: Remove Cherry Trail PMIC I2C
bus pm_disabled workaround"), but the flag most likely by mistake has been
left in the Dw I2C drivers. Let's remove it. Since MODEL_MSCC_OCELOT is
the only model-flag left, redefine it to be 0x100 so setting a very first
bit in the MODEL_MASK bits range.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drivers/i2c/busses/i2c-designware-core.h

@@ -289,8 +289,7 @@ struct dw_i2c_dev {
 #define ACCESS_INTR_MASK	0x00000004
 #define ACCESS_NO_IRQ_SUSPEND	0x00000008
 
-#define MODEL_CHERRYTRAIL	0x00000100
-#define MODEL_MSCC_OCELOT	0x00000200
+#define MODEL_MSCC_OCELOT	0x00000100
 #define MODEL_MASK		0x00000f00
 
 u32 dw_readl(struct dw_i2c_dev *dev, int offset);

drivers/i2c/busses/i2c-designware-pcidrv.c

@@ -149,7 +149,6 @@ static struct dw_pci_controller dw_pci_controllers[] = {
 	},
 	[cherrytrail] = {
 		.bus_num = -1,
-		.flags = MODEL_CHERRYTRAIL,
 		.scl_sda_cfg = &byt_config,
 	},
 	[elkhartlake] = {

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -44,7 +44,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "INT3432", 0 },
 	{ "INT3433", 0 },
 	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
-	{ "808622C1", ACCESS_NO_IRQ_SUSPEND | MODEL_CHERRYTRAIL },
+	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
 	{ "AMD0010", ACCESS_INTR_MASK },
 	{ "AMDI0010", ACCESS_INTR_MASK },
 	{ "AMDI0510", 0 },