arm64: head.S: Convert to modern annotations for assembly functions

In an effort to clarify and simplify the annotation of assembly functions
in the kernel new macros have been introduced. These replace ENTRY and
ENDPROC and also add a new annotation for static functions which previously
had no ENTRY equivalent. Update the annotations in the core kernel code to
the new macros.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arch/arm64/kernel/head.S

@@ -275,7 +275,7 @@ ENDPROC(preserve_boot_args)
  *   - first few MB of the kernel linear mapping to jump to once the MMU has
  *     been enabled
  */
-__create_page_tables:
+SYM_FUNC_START_LOCAL(__create_page_tables)
 	mov	x28, lr
 
 	/*
@@ -403,7 +403,7 @@ __create_page_tables:
 	bl	__inval_dcache_area
 
 	ret	x28
-ENDPROC(__create_page_tables)
+SYM_FUNC_END(__create_page_tables)
 	.ltorg
 
 /*
@@ -411,7 +411,7 @@ ENDPROC(__create_page_tables)
  *
  *   x0 = __PHYS_OFFSET
  */
-__primary_switched:
+SYM_FUNC_START_LOCAL(__primary_switched)
 	adrp	x4, init_thread_union
 	add	sp, x4, #THREAD_SIZE
 	adr_l	x5, init_task
@@ -456,7 +456,7 @@ __primary_switched:
 	mov	x29, #0
 	mov	x30, #0
 	b	start_kernel
-ENDPROC(__primary_switched)
+SYM_FUNC_END(__primary_switched)
 
 /*
  * end early head section, begin head code that is also used for
@@ -475,7 +475,7 @@ EXPORT_SYMBOL(kimage_vaddr)
  * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in w0 if
  * booted in EL1 or EL2 respectively.
  */
-ENTRY(el2_setup)
+SYM_FUNC_START(el2_setup)
 	msr	SPsel, #1			// We want to use SP_EL{1,2}
 	mrs	x0, CurrentEL
 	cmp	x0, #CurrentEL_EL2
@@ -636,13 +636,13 @@ install_el2_stub:
 	msr	elr_el2, lr
 	mov	w0, #BOOT_CPU_MODE_EL2		// This CPU booted in EL2
 	eret
-ENDPROC(el2_setup)
+SYM_FUNC_END(el2_setup)
 
 /*
  * Sets the __boot_cpu_mode flag depending on the CPU boot mode passed
  * in w0. See arch/arm64/include/asm/virt.h for more info.
  */
-set_cpu_boot_mode_flag:
+SYM_FUNC_START_LOCAL(set_cpu_boot_mode_flag)
 	adr_l	x1, __boot_cpu_mode
 	cmp	w0, #BOOT_CPU_MODE_EL2
 	b.ne	1f
@@ -651,7 +651,7 @@ set_cpu_boot_mode_flag:
 	dmb	sy
 	dc	ivac, x1			// Invalidate potentially stale cache line
 	ret
-ENDPROC(set_cpu_boot_mode_flag)
+SYM_FUNC_END(set_cpu_boot_mode_flag)
 
 /*
  * These values are written with the MMU off, but read with the MMU on.
@@ -683,7 +683,7 @@ ENTRY(__early_cpu_boot_status)
 	 * This provides a "holding pen" for platforms to hold all secondary
 	 * cores are held until we're ready for them to initialise.
 	 */
-ENTRY(secondary_holding_pen)
+SYM_FUNC_START(secondary_holding_pen)
 	bl	el2_setup			// Drop to EL1, w0=cpu_boot_mode
 	bl	set_cpu_boot_mode_flag
 	mrs	x0, mpidr_el1
@@ -695,19 +695,19 @@ pen:	ldr	x4, [x3]
 	b.eq	secondary_startup
 	wfe
 	b	pen
-ENDPROC(secondary_holding_pen)
+SYM_FUNC_END(secondary_holding_pen)
 
 	/*
 	 * Secondary entry point that jumps straight into the kernel. Only to
 	 * be used where CPUs are brought online dynamically by the kernel.
 	 */
-ENTRY(secondary_entry)
+SYM_FUNC_START(secondary_entry)
 	bl	el2_setup			// Drop to EL1
 	bl	set_cpu_boot_mode_flag
 	b	secondary_startup
-ENDPROC(secondary_entry)
+SYM_FUNC_END(secondary_entry)
 
-secondary_startup:
+SYM_FUNC_START_LOCAL(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.
 	 */
@@ -717,9 +717,9 @@ secondary_startup:
 	bl	__enable_mmu
 	ldr	x8, =__secondary_switched
 	br	x8
-ENDPROC(secondary_startup)
+SYM_FUNC_END(secondary_startup)
 
-__secondary_switched:
+SYM_FUNC_START_LOCAL(__secondary_switched)
 	adr_l	x5, vectors
 	msr	vbar_el1, x5
 	isb
@@ -734,13 +734,13 @@ __secondary_switched:
 	mov	x29, #0
 	mov	x30, #0
 	b	secondary_start_kernel
-ENDPROC(__secondary_switched)
+SYM_FUNC_END(__secondary_switched)
 
-__secondary_too_slow:
+SYM_FUNC_START_LOCAL(__secondary_too_slow)
 	wfe
 	wfi
 	b	__secondary_too_slow
-ENDPROC(__secondary_too_slow)
+SYM_FUNC_END(__secondary_too_slow)
 
 /*
  * The booting CPU updates the failed status @__early_cpu_boot_status,
@@ -772,7 +772,7 @@ ENDPROC(__secondary_too_slow)
  * Checks if the selected granule size is supported by the CPU.
  * If it isn't, park the CPU
  */
-ENTRY(__enable_mmu)
+SYM_FUNC_START(__enable_mmu)
 	mrs	x2, ID_AA64MMFR0_EL1
 	ubfx	x2, x2, #ID_AA64MMFR0_TGRAN_SHIFT, 4
 	cmp	x2, #ID_AA64MMFR0_TGRAN_SUPPORTED
@@ -796,9 +796,9 @@ ENTRY(__enable_mmu)
 	dsb	nsh
 	isb
 	ret
-ENDPROC(__enable_mmu)
+SYM_FUNC_END(__enable_mmu)
 
-ENTRY(__cpu_secondary_check52bitva)
+SYM_FUNC_START(__cpu_secondary_check52bitva)
 #ifdef CONFIG_ARM64_VA_BITS_52
 	ldr_l	x0, vabits_actual
 	cmp	x0, #52
@@ -816,9 +816,9 @@ ENTRY(__cpu_secondary_check52bitva)
 
 #endif
 2:	ret
-ENDPROC(__cpu_secondary_check52bitva)
+SYM_FUNC_END(__cpu_secondary_check52bitva)
 
-__no_granule_support:
+SYM_FUNC_START_LOCAL(__no_granule_support)
 	/* Indicate that this CPU can't boot and is stuck in the kernel */
 	update_early_cpu_boot_status \
 		CPU_STUCK_IN_KERNEL | CPU_STUCK_REASON_NO_GRAN, x1, x2
@@ -826,10 +826,10 @@ __no_granule_support:
 	wfe
 	wfi
 	b	1b
-ENDPROC(__no_granule_support)
+SYM_FUNC_END(__no_granule_support)
 
 #ifdef CONFIG_RELOCATABLE
-__relocate_kernel:
+SYM_FUNC_START_LOCAL(__relocate_kernel)
 	/*
 	 * Iterate over each entry in the relocation table, and apply the
 	 * relocations in place.
@@ -931,10 +931,10 @@ __relocate_kernel:
 #endif
 	ret
 
-ENDPROC(__relocate_kernel)
+SYM_FUNC_END(__relocate_kernel)
 #endif
 
-__primary_switch:
+SYM_FUNC_START_LOCAL(__primary_switch)
 #ifdef CONFIG_RANDOMIZE_BASE
 	mov	x19, x0				// preserve new SCTLR_EL1 value
 	mrs	x20, sctlr_el1			// preserve old SCTLR_EL1 value
@@ -977,4 +977,4 @@ __primary_switch:
 	ldr	x8, =__primary_switched
 	adrp	x0, __PHYS_OFFSET
 	br	x8
-ENDPROC(__primary_switch)
+SYM_FUNC_END(__primary_switch)