Commit c68cc0f6 authored by Yair Shapira's avatar Yair Shapira Committed by Luciano Coelho

wl18xx: add support for ht_mode in conf.h

ht_mode added to wl18xx conf struct in order to support different modes
from the configuration file, as well as module params, and by default
(working without a conf file and/or no module params).
the hack regarding conf.phy.low_band_component_type for each board
is now explicitly handled after parsing module params.
missing default values to wl18xx config added.
fix string module params not to have defaults (so if empty, param
can be taken from conf file).
update conf version to 3.
Signed-off-by: default avatarYair Shapira <yair.shapira@ti.com>
Signed-off-by: default avatarIdo Reis <idor@ti.com>
Signed-off-by: default avatarLuciano Coelho <coelho@ti.com>
parent 8e945ff9
......@@ -23,7 +23,7 @@
#define __WL18XX_CONF_H__
#define WL18XX_CONF_MAGIC 0x10e100ca
#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0002)
#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0003)
#define WL18XX_CONF_MASK 0x0000ffff
#define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \
sizeof(struct wl18xx_priv_conf))
......@@ -84,7 +84,26 @@ struct wl18xx_mac_and_phy_params {
u8 padding[1];
} __packed;
enum wl18xx_ht_mode {
/* Default - use MIMO, fallback to SISO20 */
HT_MODE_DEFAULT = 0,
/* Wide - use SISO40 */
HT_MODE_WIDE = 1,
/* Use SISO20 */
HT_MODE_SISO20 = 2,
};
struct wl18xx_ht_settings {
/* DEFAULT / WIDE / SISO20 */
u8 mode;
} __packed;
struct wl18xx_priv_conf {
/* Module params structures */
struct wl18xx_ht_settings ht;
/* this structure is copied wholesale to FW */
struct wl18xx_mac_and_phy_params phy;
} __packed;
......
......@@ -43,8 +43,8 @@
#define WL18XX_RX_CHECKSUM_MASK 0x40
static char *ht_mode_param = "default";
static char *board_type_param = "hdk";
static char *ht_mode_param = NULL;
static char *board_type_param = NULL;
static bool checksum_param = false;
static bool enable_11a_param = true;
static int num_rx_desc_param = -1;
......@@ -494,16 +494,20 @@ static struct wlcore_conf wl18xx_conf = {
};
static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
.ht = {
.mode = HT_MODE_DEFAULT,
},
.phy = {
.phy_standalone = 0x00,
.primary_clock_setting_time = 0x05,
.clock_valid_on_wake_up = 0x00,
.secondary_clock_setting_time = 0x05,
.board_type = BOARD_TYPE_HDK_18XX,
.rdl = 0x01,
.auto_detect = 0x00,
.dedicated_fem = FEM_NONE,
.low_band_component = COMPONENT_2_WAY_SWITCH,
.low_band_component_type = 0x05,
.low_band_component_type = 0x06,
.high_band_component = COMPONENT_2_WAY_SWITCH,
.high_band_component_type = 0x09,
.tcxo_ldo_voltage = 0x00,
......@@ -1391,27 +1395,44 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
if (ret < 0)
goto out_free;
if (!strcmp(board_type_param, "fpga")) {
priv->conf.phy.board_type = BOARD_TYPE_FPGA_18XX;
} else if (!strcmp(board_type_param, "hdk")) {
priv->conf.phy.board_type = BOARD_TYPE_HDK_18XX;
/* HACK! Just for now we hardcode HDK to 0x06 */
priv->conf.phy.low_band_component_type = 0x06;
} else if (!strcmp(board_type_param, "dvp")) {
priv->conf.phy.board_type = BOARD_TYPE_DVP_18XX;
} else if (!strcmp(board_type_param, "evb")) {
priv->conf.phy.board_type = BOARD_TYPE_EVB_18XX;
} else if (!strcmp(board_type_param, "com8")) {
priv->conf.phy.board_type = BOARD_TYPE_COM8_18XX;
/* HACK! Just for now we hardcode COM8 to 0x06 */
/* If the module param is set, update it in conf */
if (board_type_param) {
if (!strcmp(board_type_param, "fpga")) {
priv->conf.phy.board_type = BOARD_TYPE_FPGA_18XX;
} else if (!strcmp(board_type_param, "hdk")) {
priv->conf.phy.board_type = BOARD_TYPE_HDK_18XX;
} else if (!strcmp(board_type_param, "dvp")) {
priv->conf.phy.board_type = BOARD_TYPE_DVP_18XX;
} else if (!strcmp(board_type_param, "evb")) {
priv->conf.phy.board_type = BOARD_TYPE_EVB_18XX;
} else if (!strcmp(board_type_param, "com8")) {
priv->conf.phy.board_type = BOARD_TYPE_COM8_18XX;
} else {
wl1271_error("invalid board type '%s'",
board_type_param);
ret = -EINVAL;
goto out_free;
}
}
/* HACK! Just for now we hardcode COM8 and HDK to 0x06 */
switch (priv->conf.phy.board_type) {
case BOARD_TYPE_HDK_18XX:
case BOARD_TYPE_COM8_18XX:
priv->conf.phy.low_band_component_type = 0x06;
} else {
wl1271_error("invalid board type '%s'", board_type_param);
break;
case BOARD_TYPE_FPGA_18XX:
case BOARD_TYPE_DVP_18XX:
case BOARD_TYPE_EVB_18XX:
priv->conf.phy.low_band_component_type = 0x05;
break;
default:
wl1271_error("invalid board type '%d'",
priv->conf.phy.board_type);
ret = -EINVAL;
goto out_free;
}
/* If the module param is set, update it in conf */
if (low_band_component_param != -1)
priv->conf.phy.low_band_component = low_band_component_param;
if (low_band_component_type_param != -1)
......@@ -1432,7 +1453,21 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
if (dc2dc_param != -1)
priv->conf.phy.external_pa_dc2dc = dc2dc_param;
if (!strcmp(ht_mode_param, "default")) {
if (ht_mode_param) {
if (!strcmp(ht_mode_param, "default"))
priv->conf.ht.mode = HT_MODE_DEFAULT;
else if (!strcmp(ht_mode_param, "wide"))
priv->conf.ht.mode = HT_MODE_WIDE;
else if (!strcmp(ht_mode_param, "siso20"))
priv->conf.ht.mode = HT_MODE_SISO20;
else {
wl1271_error("invalid ht_mode '%s'", ht_mode_param);
ret = -EINVAL;
goto out_free;
}
}
if (priv->conf.ht.mode == HT_MODE_DEFAULT) {
/*
* Only support mimo with multiple antennas. Fall back to
* siso20.
......@@ -1447,20 +1482,16 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
/* 5Ghz is always wide */
wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ,
&wl18xx_siso40_ht_cap_5ghz);
} else if (!strcmp(ht_mode_param, "wide")) {
} else if (priv->conf.ht.mode == HT_MODE_WIDE) {
wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ,
&wl18xx_siso40_ht_cap_2ghz);
wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ,
&wl18xx_siso40_ht_cap_5ghz);
} else if (!strcmp(ht_mode_param, "siso20")) {
} else if (priv->conf.ht.mode == HT_MODE_SISO20) {
wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ,
&wl18xx_siso20_ht_cap);
wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ,
&wl18xx_siso20_ht_cap);
} else {
wl1271_error("invalid ht_mode '%s'", ht_mode_param);
ret = -EINVAL;
goto out_free;
}
if (!checksum_param) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment