Merge master.kernel.org:/home/rmk/linux-2.6-arm

arch/arm/mach-ixp4xx/common.c

@@ -125,7 +125,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 	} else if (type & IRQT_LOW) {
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP4XX_IRQ_LEVEL;
-	}
+	} else
+		return -EINVAL;
 
 	ixp4xx_config_irq(irq, irq_type);
 
@@ -142,6 +143,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 
 	/* Set the new style */
 	*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
+
+	return 0;
 }
 
 static void ixp4xx_irq_mask(unsigned int irq)

include/asm-arm/arch-s3c2410/anubis-map.h

@@ -20,22 +20,22 @@
 
 /* start peripherals off after the S3C2410 */
 
-#define ANUBIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x02000000))
+#define ANUBIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x01800000))
 
 #define ANUBIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
 
 /* we put the CPLD registers next, to get them out of the way */
 
-#define ANUBIS_VA_CTRL1	    ANUBIS_IOADDR(0x00000000)	 /* 0x01300000 */
+#define ANUBIS_VA_CTRL1	    ANUBIS_IOADDR(0x00000000)	 /* 0x01800000 */
 #define ANUBIS_PA_CTRL1	    (ANUBIS_PA_CPLD)
 
-#define ANUBIS_VA_CTRL2	    ANUBIS_IOADDR(0x00100000)	 /* 0x01400000 */
+#define ANUBIS_VA_CTRL2	    ANUBIS_IOADDR(0x00100000)	 /* 0x01900000 */
 #define ANUBIS_PA_CTRL2	    (ANUBIS_PA_CPLD)
 
-#define ANUBIS_VA_CTRL3	    ANUBIS_IOADDR(0x00200000)	 /* 0x01500000 */
+#define ANUBIS_VA_CTRL3	    ANUBIS_IOADDR(0x00200000)	 /* 0x01A00000 */
 #define ANUBIS_PA_CTRL3	    (ANUBIS_PA_CPLD)
 
-#define ANUBIS_VA_CTRL4	    ANUBIS_IOADDR(0x00300000)	 /* 0x01600000 */
+#define ANUBIS_VA_CTRL4	    ANUBIS_IOADDR(0x00300000)	 /* 0x01B00000 */
 #define ANUBIS_PA_CTRL4	    (ANUBIS_PA_CPLD)
 
 #define ANUBIS_IDEPRI	    ANUBIS_IOADDR(0x01000000)

include/asm-arm/signal.h

@@ -115,7 +115,6 @@ typedef unsigned long sigset_t;
 
 #ifdef __KERNEL__
 #define SA_TIMER		0x40000000
-#define SA_IRQNOMASK		0x08000000
 #endif
 
 #include <asm-generic/signal.h>