Staging: sxg: fix up unused function warnings

These functions aren't used yet, so put them behind the
proper #define so the compiler doesn't complain about them.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/sxg/sxg.c

@@ -112,12 +112,16 @@ static bool sxg_mac_filter(p_adapter_t adapter,
 static struct net_device_stats *sxg_get_stats(p_net_device dev);
 #endif
 
+#define XXXTODO 0
+
+#if XXXTODO
 static int sxg_mac_set_address(p_net_device dev, void *ptr);
+static void sxg_mcast_set_list(p_net_device dev);
+#endif
 
 static void sxg_adapter_set_hwaddr(p_adapter_t adapter);
 
 static void sxg_unmap_mmio_space(p_adapter_t adapter);
-static void sxg_mcast_set_mask(p_adapter_t adapter);
 
 static int sxg_initialize_adapter(p_adapter_t adapter);
 static void sxg_stock_rcv_buffers(p_adapter_t adapter);
@@ -132,9 +136,6 @@ static int sxg_write_mdio_reg(p_adapter_t adapter,
 			      u32 DevAddr, u32 RegAddr, u32 Value);
 static int sxg_read_mdio_reg(p_adapter_t adapter,
 			     u32 DevAddr, u32 RegAddr, u32 *pValue);
-static void sxg_mcast_set_list(p_net_device dev);
-
-#define XXXTODO 0
 
 static unsigned int sxg_first_init = 1;
 static char *sxg_banner =
@@ -2667,38 +2668,6 @@ static int sxg_read_mdio_reg(p_adapter_t adapter,
 	return (STATUS_SUCCESS);
 }
 
-/*
- *  Allocate a mcast_address structure to hold the multicast address.
- *  Link it in.
- */
-static int sxg_mcast_add_list(p_adapter_t adapter, char *address)
-{
-	p_mcast_address_t mcaddr, mlist;
-	bool equaladdr;
-
-	/* Check to see if it already exists */
-	mlist = adapter->mcastaddrs;
-	while (mlist) {
-		ETHER_EQ_ADDR(mlist->address, address, equaladdr);
-		if (equaladdr) {
-			return (STATUS_SUCCESS);
-		}
-		mlist = mlist->next;
-	}
-
-	/* Doesn't already exist.  Allocate a structure to hold it */
-	mcaddr = kmalloc(sizeof(mcast_address_t), GFP_ATOMIC);
-	if (mcaddr == NULL)
-		return 1;
-
-	memcpy(mcaddr->address, address, 6);
-
-	mcaddr->next = adapter->mcastaddrs;
-	adapter->mcastaddrs = mcaddr;
-
-	return (STATUS_SUCCESS);
-}
-
 /*
  * Functions to obtain the CRC corresponding to the destination mac address.
  * This is a standard ethernet CRC in that it is a 32-bit, reflected CRC using
@@ -2710,7 +2679,6 @@ static int sxg_mcast_add_list(p_adapter_t adapter, char *address)
  *
  */
 static u32 sxg_crc_table[256];	/* Table of CRC's for all possible byte values */
-static u32 sxg_crc_init;	/* Is table initialized                        */
 
 /*
  *  Contruct the CRC32 table
@@ -2737,6 +2705,8 @@ static void sxg_mcast_init_crc32(void)
 	}
 }
 
+#if XXXTODO
+static u32 sxg_crc_init;	/* Is table initialized */
 /*
  *  Return the MAC hast as described above.
  */
@@ -2765,6 +2735,74 @@ static unsigned char sxg_mcast_get_mac_hash(char *macaddr)
 	return (machash);
 }
 
+static void sxg_mcast_set_mask(p_adapter_t adapter)
+{
+	PSXG_UCODE_REGS sxg_regs = adapter->UcodeRegs;
+
+	DBG_ERROR("%s ENTER (%s) macopts[%x] mask[%llx]\n", __func__,
+		  adapter->netdev->name, (unsigned int)adapter->MacFilter,
+		  adapter->MulticastMask);
+
+	if (adapter->MacFilter & (MAC_ALLMCAST | MAC_PROMISC)) {
+		/* Turn on all multicast addresses. We have to do this for promiscuous
+		 * mode as well as ALLMCAST mode.  It saves the Microcode from having
+		 * to keep state about the MAC configuration.
+		 */
+/*              DBG_ERROR("sxg: %s macopts = MAC_ALLMCAST | MAC_PROMISC\n      SLUT MODE!!!\n",__func__); */
+		WRITE_REG(sxg_regs->McastLow, 0xFFFFFFFF, FLUSH);
+		WRITE_REG(sxg_regs->McastHigh, 0xFFFFFFFF, FLUSH);
+/*        DBG_ERROR("%s (%s) WRITE to slic_regs slic_mcastlow&high 0xFFFFFFFF\n",__func__, adapter->netdev->name); */
+
+	} else {
+		/* Commit our multicast mast to the SLIC by writing to the multicast
+		 * address mask registers
+		 */
+		DBG_ERROR("%s (%s) WRITE mcastlow[%lx] mcasthigh[%lx]\n",
+			  __func__, adapter->netdev->name,
+			  ((ulong) (adapter->MulticastMask & 0xFFFFFFFF)),
+			  ((ulong)
+			   ((adapter->MulticastMask >> 32) & 0xFFFFFFFF)));
+
+		WRITE_REG(sxg_regs->McastLow,
+			  (u32) (adapter->MulticastMask & 0xFFFFFFFF), FLUSH);
+		WRITE_REG(sxg_regs->McastHigh,
+			  (u32) ((adapter->
+				  MulticastMask >> 32) & 0xFFFFFFFF), FLUSH);
+	}
+}
+
+/*
+ *  Allocate a mcast_address structure to hold the multicast address.
+ *  Link it in.
+ */
+static int sxg_mcast_add_list(p_adapter_t adapter, char *address)
+{
+	p_mcast_address_t mcaddr, mlist;
+	bool equaladdr;
+
+	/* Check to see if it already exists */
+	mlist = adapter->mcastaddrs;
+	while (mlist) {
+		ETHER_EQ_ADDR(mlist->address, address, equaladdr);
+		if (equaladdr) {
+			return (STATUS_SUCCESS);
+		}
+		mlist = mlist->next;
+	}
+
+	/* Doesn't already exist.  Allocate a structure to hold it */
+	mcaddr = kmalloc(sizeof(mcast_address_t), GFP_ATOMIC);
+	if (mcaddr == NULL)
+		return 1;
+
+	memcpy(mcaddr->address, address, 6);
+
+	mcaddr->next = adapter->mcastaddrs;
+	adapter->mcastaddrs = mcaddr;
+
+	return (STATUS_SUCCESS);
+}
+
 static void sxg_mcast_set_bit(p_adapter_t adapter, char *address)
 {
 	unsigned char crcpoly;
@@ -2783,7 +2821,6 @@ static void sxg_mcast_set_bit(p_adapter_t adapter, char *address)
 
 static void sxg_mcast_set_list(p_net_device dev)
 {
-#if XXXTODO
 	p_adapter_t adapter = (p_adapter_t) netdev_priv(dev);
 	int status = STATUS_SUCCESS;
 	int i;
@@ -2835,45 +2872,9 @@ static void sxg_mcast_set_list(p_net_device dev)
 			sxg_mcast_set_mask(adapter);
 		}
 	}
-#endif
 	return;
 }
-
-static void sxg_mcast_set_mask(p_adapter_t adapter)
-{
-	PSXG_UCODE_REGS sxg_regs = adapter->UcodeRegs;
-
-	DBG_ERROR("%s ENTER (%s) macopts[%x] mask[%llx]\n", __func__,
-		  adapter->netdev->name, (unsigned int)adapter->MacFilter,
-		  adapter->MulticastMask);
-
-	if (adapter->MacFilter & (MAC_ALLMCAST | MAC_PROMISC)) {
-		/* Turn on all multicast addresses. We have to do this for promiscuous
-		 * mode as well as ALLMCAST mode.  It saves the Microcode from having
-		 * to keep state about the MAC configuration.
-		 */
-/*              DBG_ERROR("sxg: %s macopts = MAC_ALLMCAST | MAC_PROMISC\n      SLUT MODE!!!\n",__func__); */
-		WRITE_REG(sxg_regs->McastLow, 0xFFFFFFFF, FLUSH);
-		WRITE_REG(sxg_regs->McastHigh, 0xFFFFFFFF, FLUSH);
-/*        DBG_ERROR("%s (%s) WRITE to slic_regs slic_mcastlow&high 0xFFFFFFFF\n",__func__, adapter->netdev->name); */
-
-	} else {
-		/* Commit our multicast mast to the SLIC by writing to the multicast
-		 * address mask registers
-		 */
-		DBG_ERROR("%s (%s) WRITE mcastlow[%lx] mcasthigh[%lx]\n",
-			  __func__, adapter->netdev->name,
-			  ((ulong) (adapter->MulticastMask & 0xFFFFFFFF)),
-			  ((ulong)
-			   ((adapter->MulticastMask >> 32) & 0xFFFFFFFF)));
-
-		WRITE_REG(sxg_regs->McastLow,
-			  (u32) (adapter->MulticastMask & 0xFFFFFFFF), FLUSH);
-		WRITE_REG(sxg_regs->McastHigh,
-			  (u32) ((adapter->
-				  MulticastMask >> 32) & 0xFFFFFFFF), FLUSH);
-	}
-}
+#endif
 
 static void sxg_unmap_mmio_space(p_adapter_t adapter)
 {
@@ -3267,9 +3268,9 @@ static void sxg_adapter_set_hwaddr(p_adapter_t adapter)
 
 }
 
+#if XXXTODO
 static int sxg_mac_set_address(p_net_device dev, void *ptr)
 {
-#if XXXTODO
 	p_adapter_t adapter = (p_adapter_t) netdev_priv(dev);
 	struct sockaddr *addr = ptr;
 
@@ -3295,9 +3296,9 @@ static int sxg_mac_set_address(p_net_device dev, void *ptr)
 		  adapter->currmacaddr[5]);
 
 	sxg_config_set(adapter, TRUE);
-#endif
 	return 0;
 }
+#endif
 
 /*****************************************************************************/
 /*************  SXG DRIVER FUNCTIONS  (below) ********************************/