Commit c86f5173 authored by Alexander Shiyan's avatar Alexander Shiyan Committed by Arnd Bergmann

ARM: clps711x: Switch to MULTIPLATFORM

Switch CLPS711X to multiplatform.
Signed-off-by: default avatarAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 4a56f46a
...@@ -353,20 +353,6 @@ config ARM_SINGLE_ARMV7M ...@@ -353,20 +353,6 @@ config ARM_SINGLE_ARMV7M
select SPARSE_IRQ select SPARSE_IRQ
select USE_OF select USE_OF
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
select CLKSRC_MMIO
select COMMON_CLK
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
select MFD_SYSCON
select SOC_BUS
help
Support for Cirrus Logic 711x/721x/731x based boards.
config ARCH_GEMINI config ARCH_GEMINI
bool "Cortina Systems Gemini" bool "Cortina Systems Gemini"
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
......
...@@ -140,7 +140,6 @@ head-y := arch/arm/kernel/head$(MMUEXT).o ...@@ -140,7 +140,6 @@ head-y := arch/arm/kernel/head$(MMUEXT).o
# Text offset. This list is sorted numerically by address in order to # Text offset. This list is sorted numerically by address in order to
# provide a means to avoid/resolve conflicts in multi-arch kernels. # provide a means to avoid/resolve conflicts in multi-arch kernels.
textofs-y := 0x00008000 textofs-y := 0x00008000
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
# We don't want the htc bootloader to corrupt kernel during resume # We don't want the htc bootloader to corrupt kernel during resume
textofs-$(CONFIG_PM_H1940) := 0x00108000 textofs-$(CONFIG_PM_H1940) := 0x00108000
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
......
if ARCH_CLPS711X menuconfig ARCH_CLPS711X
bool "Cirrus Logic EP721x/EP731x-based"
menu "CLPS711X/EP721X/EP731X Implementations" depends on ARCH_MULTI_V4T
select ARCH_REQUIRE_GPIOLIB
config MACH_CLPS711X_DT select AUTO_ZRELADDR
bool "Device-tree support" select CLKSRC_MMIO
select CLKSRC_OF select CLKSRC_OF
select COMMON_CLK
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
select MFD_SYSCON
select OF_IRQ select OF_IRQ
select USE_OF select USE_OF
help help
Select this if you want to experiment device-tree with Select this if you use ARMv4T Cirrus Logic chips.
ARMv4T Cirrus Logic chips.
endmenu
endif
obj-$(CONFIG_MACH_CLPS711X_DT) += board-dt.o obj-y += board-dt.o
/*
* This file contains the hardware definitions of the Cirrus Logic
* ARM7 CLPS711X internal registers.
*
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __MACH_CLPS711X_H
#define __MACH_CLPS711X_H
#include <linux/mfd/syscon/clps711x.h>
#define CLPS711X_PHYS_BASE (0x80000000)
#define PADR (0x0000)
#define PBDR (0x0001)
#define PCDR (0x0002)
#define PDDR (0x0003)
#define PADDR (0x0040)
#define PBDDR (0x0041)
#define PCDDR (0x0042)
#define PDDDR (0x0043)
#define PEDR (0x0083)
#define PEDDR (0x00c3)
#define SYSCON1 (0x0100)
#define SYSFLG1 (0x0140)
#define MEMCFG1 (0x0180)
#define MEMCFG2 (0x01c0)
#define DRFPR (0x0200)
#define LCDCON (0x02c0)
#define TC1D (0x0300)
#define TC2D (0x0340)
#define RTCDR (0x0380)
#define RTCMR (0x03c0)
#define PMPCON (0x0400)
#define CODR (0x0440)
#define UARTDR1 (0x0480)
#define UBRLCR1 (0x04c0)
#define SYNCIO (0x0500)
#define PALLSW (0x0540)
#define PALMSW (0x0580)
#define STFCLR (0x05c0)
#define HALT (0x0800)
#define STDBY (0x0840)
#define FBADDR (0x1000)
#define SYSCON2 (0x1100)
#define SYSFLG2 (0x1140)
#define UARTDR2 (0x1480)
#define UBRLCR2 (0x14c0)
#define SS2DR (0x1500)
#define SS2POP (0x16c0)
#define DAIR (0x2000)
#define DAIDR0 (0x2040)
#define DAIDR1 (0x2080)
#define DAIDR2 (0x20c0)
#define DAISR (0x2100)
#define SYSCON3 (0x2200)
#define LEDFLSH (0x22c0)
#define SDCONF (0x2300)
#define SDRFPR (0x2340)
#define UNIQID (0x2440)
#define DAI64FS (0x2600)
#define PLLW (0x2610)
#define PLLR (0xa5a8)
#define RANDID0 (0x2700)
#define RANDID1 (0x2704)
#define RANDID2 (0x2708)
#define RANDID3 (0x270c)
#define LCDCON_GSEN (1 << 30)
#define LCDCON_GSMD (1 << 31)
/* common bits: UARTDR1 / UARTDR2 */
#define UARTDR_FRMERR (1 << 8)
#define UARTDR_PARERR (1 << 9)
#define UARTDR_OVERR (1 << 10)
/* common bits: UBRLCR1 / UBRLCR2 */
#define UBRLCR_BAUD_MASK ((1 << 12) - 1)
#define UBRLCR_BREAK (1 << 12)
#define UBRLCR_PRTEN (1 << 13)
#define UBRLCR_EVENPRT (1 << 14)
#define UBRLCR_XSTOP (1 << 15)
#define UBRLCR_FIFOEN (1 << 16)
#define UBRLCR_WRDLEN5 (0 << 17)
#define UBRLCR_WRDLEN6 (1 << 17)
#define UBRLCR_WRDLEN7 (2 << 17)
#define UBRLCR_WRDLEN8 (3 << 17)
#define UBRLCR_WRDLEN_MASK (3 << 17)
#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8)
#define SYNCIO_SMCKEN (1 << 13)
#define SYNCIO_TXFRMEN (1 << 14)
#define DAIR_RESERVED (0x0404)
#define DAIR_DAIEN (1 << 16)
#define DAIR_ECS (1 << 17)
#define DAIR_LCTM (1 << 19)
#define DAIR_LCRM (1 << 20)
#define DAIR_RCTM (1 << 21)
#define DAIR_RCRM (1 << 22)
#define DAIR_LBM (1 << 23)
#define DAIDR2_FIFOEN (1 << 15)
#define DAIDR2_FIFOLEFT (0x0d << 16)
#define DAIDR2_FIFORIGHT (0x11 << 16)
#define DAISR_RCTS (1 << 0)
#define DAISR_RCRS (1 << 1)
#define DAISR_LCTS (1 << 2)
#define DAISR_LCRS (1 << 3)
#define DAISR_RCTU (1 << 4)
#define DAISR_RCRO (1 << 5)
#define DAISR_LCTU (1 << 6)
#define DAISR_LCRO (1 << 7)
#define DAISR_RCNF (1 << 8)
#define DAISR_RCNE (1 << 9)
#define DAISR_LCNF (1 << 10)
#define DAISR_LCNE (1 << 11)
#define DAISR_FIFO (1 << 12)
#define DAI64FS_I2SF64 (1 << 0)
#define DAI64FS_AUDIOCLKEN (1 << 1)
#define DAI64FS_AUDIOCLKSRC (1 << 2)
#define DAI64FS_MCLK256EN (1 << 3)
#define DAI64FS_LOOPBACK (1 << 5)
#define SDCONF_ACTIVE (1 << 10)
#define SDCONF_CLKCTL (1 << 9)
#define SDCONF_WIDTH_4 (0 << 7)
#define SDCONF_WIDTH_8 (1 << 7)
#define SDCONF_WIDTH_16 (2 << 7)
#define SDCONF_WIDTH_32 (3 << 7)
#define SDCONF_SIZE_16 (0 << 5)
#define SDCONF_SIZE_64 (1 << 5)
#define SDCONF_SIZE_128 (2 << 5)
#define SDCONF_SIZE_256 (3 << 5)
#define SDCONF_CASLAT_2 (2)
#define SDCONF_CASLAT_3 (3)
#define MEMCFG_BUS_WIDTH_32 (1)
#define MEMCFG_BUS_WIDTH_16 (0)
#define MEMCFG_BUS_WIDTH_8 (3)
#define MEMCFG_SQAEN (1 << 6)
#define MEMCFG_CLKENB (1 << 7)
#define MEMCFG_WAITSTATE_8_3 (0 << 2)
#define MEMCFG_WAITSTATE_7_3 (1 << 2)
#define MEMCFG_WAITSTATE_6_3 (2 << 2)
#define MEMCFG_WAITSTATE_5_3 (3 << 2)
#define MEMCFG_WAITSTATE_4_2 (4 << 2)
#define MEMCFG_WAITSTATE_3_2 (5 << 2)
#define MEMCFG_WAITSTATE_2_2 (6 << 2)
#define MEMCFG_WAITSTATE_1_2 (7 << 2)
#define MEMCFG_WAITSTATE_8_1 (8 << 2)
#define MEMCFG_WAITSTATE_7_1 (9 << 2)
#define MEMCFG_WAITSTATE_6_1 (10 << 2)
#define MEMCFG_WAITSTATE_5_1 (11 << 2)
#define MEMCFG_WAITSTATE_4_0 (12 << 2)
#define MEMCFG_WAITSTATE_3_0 (13 << 2)
#define MEMCFG_WAITSTATE_2_0 (14 << 2)
#define MEMCFG_WAITSTATE_1_0 (15 << 2)
/* INTSR1 Interrupts */
#define IRQ_CSINT (4)
#define IRQ_EINT1 (5)
#define IRQ_EINT2 (6)
#define IRQ_EINT3 (7)
#define IRQ_TC1OI (8)
#define IRQ_TC2OI (9)
#define IRQ_RTCMI (10)
#define IRQ_TINT (11)
#define IRQ_UTXINT1 (12)
#define IRQ_URXINT1 (13)
#define IRQ_UMSINT (14)
#define IRQ_SSEOTI (15)
/* INTSR2 Interrupts */
#define IRQ_KBDINT (16 + 0)
#define IRQ_SS2RX (16 + 1)
#define IRQ_SS2TX (16 + 2)
#define IRQ_UTXINT2 (16 + 12)
#define IRQ_URXINT2 (16 + 13)
/* INTSR3 Interrupts */
#define IRQ_DAIINT (32 + 0)
#endif /* __MACH_CLPS711X_H */
/*
* arch/arm/mach-clps711x/include/mach/hardware.h
*
* This file contains the hardware definitions of the Prospector P720T.
*
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
#include <mach/clps711x.h>
#define CLPS711X_VIRT_BASE IOMEM(0xfeff4000)
#ifndef __ASSEMBLY__
#define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off))
#define clps_readw(off) readw(CLPS711X_VIRT_BASE + (off))
#define clps_readl(off) readl(CLPS711X_VIRT_BASE + (off))
#define clps_writeb(val,off) writeb(val, CLPS711X_VIRT_BASE + (off))
#define clps_writew(val,off) writew(val, CLPS711X_VIRT_BASE + (off))
#define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off))
#endif
#define CS0_PHYS_BASE (0x00000000)
#define CS1_PHYS_BASE (0x10000000)
#define CS2_PHYS_BASE (0x20000000)
#define CS3_PHYS_BASE (0x30000000)
#define CS4_PHYS_BASE (0x40000000)
#define CS5_PHYS_BASE (0x50000000)
#define CS6_PHYS_BASE (0x60000000)
#define CS7_PHYS_BASE (0x70000000)
#define CLPS711X_SRAM_BASE CS6_PHYS_BASE
#define CLPS711X_SRAM_SIZE (48 * 1024)
#define CLPS711X_SDRAM0_BASE (0xc0000000)
#define CLPS711X_SDRAM1_BASE (0xd0000000)
#endif
/*
* arch/arm/mach-clps711x/include/mach/uncompress.h
*
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <mach/clps711x.h>
#ifdef CONFIG_DEBUG_CLPS711X_UART2
#define SYSFLGx SYSFLG2
#define UARTDRx UARTDR2
#else
#define SYSFLGx SYSFLG1
#define UARTDRx UARTDR1
#endif
#define phys_reg(x) (*(volatile u32 *)(CLPS711X_PHYS_BASE + (x)))
/*
* The following code assumes the serial port has already been
* initialized by the bootloader. If you didn't setup a port in
* your bootloader then nothing will appear (which might be desired).
*
* This does not append a newline
*/
static inline void putc(int c)
{
while (phys_reg(SYSFLGx) & SYSFLG_UTXFF)
barrier();
phys_reg(UARTDRx) = c;
}
static inline void flush(void)
{
while (phys_reg(SYSFLGx) & SYSFLG_UBUSY)
barrier();
}
/*
* nothing to do
*/
#define arch_decomp_setup()
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment