Commit c878eb62 authored by Oleksij Rempel's avatar Oleksij Rempel Committed by Olof Johansson

ARM: dts: add DT for Alphascale ASM9260 SoC

for now it is wary basic SoC description with most important IPs needed
to make this device work
Signed-off-by: default avatarOleksij Rempel <linux@rempel-privat.de>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent b7392d22
......@@ -555,7 +555,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb \
mt6592-evb.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_MACH_ASM9260) += alphascale-asm9260-devkit.dtb
endif
always := $(dtb-y)
......
/*
* Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
*
* Licensed under the X11 license or the GPL v2 (or later)
*/
/dts-v1/;
#include "alphascale-asm9260.dtsi"
/ {
model = "Alphascale asm9260 Development Kit";
compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
};
/*
* Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
*
* Licensed under the X11 license or the GPL v2 (or later)
*/
#include "skeleton.dtsi"
#include <dt-bindings/clock/alphascale,asm9260.h>
/ {
interrupt-parent = <&icoll>;
memory {
device_type = "memory";
reg = <0x20000000 0x2000000>;
};
cpus {
#address-cells = <0>;
#size-cells = <0>;
cpu {
compatible = "arm,arm926ej-s";
device_type = "cpu";
clocks = <&acc CLKID_SYS_CPU>;
};
};
osc24m: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-accuracy = <30000>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
acc: clock-controller@80040000 {
compatible = "alphascale,asm9260-clock-controller";
#clock-cells = <1>;
clocks = <&osc24m>;
reg = <0x80040000 0x204>;
};
icoll: interrupt-controller@80054000 {
compatible = "alphascale,asm9260-icoll";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x80054000 0x200>;
};
timer0: timer@80088000 {
compatible = "alphascale,asm9260-timer";
reg = <0x80088000 0x4000>;
clocks = <&acc CLKID_AHB_TIMER0>;
interrupts = <29>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment