Commit c8ae88da authored by David Brownell's avatar David Brownell Committed by Greg Kroah-Hartman

[PATCH] USB: OHCI root hub suspend/resume/wakeup

This patch goes on top of the previous two, and the hcd-0506 patch:

  - Moves root hub suspend/resume code out of PCI-specific bus glue
    into generic hub code.  That way it's easy to re-use it even
    for non-PCI implementations like SA1111, OMAP, and LH7A404.
    (Plus, given CONFIG_USB_SUSPEND, it can be invoked with sysfs.)

  - Root hub suspend is a lot more careful, as is root hub resume.
    Pending transactions are now shut down more consistently; and
    more registers are re-initialized on resume.

  - The PCI bus glue is now left with truly generic PCI stuff, plus
    some PMAC-specific stuff (which doesn't include irq disabling
    any more, hcd-0506 moves that up a level in the stack).

  - Remote wakeup support is basically working for the root hub.
    (given CONFIG_USB_SUSPEND to suspend devices and enable it).

  - Idle HCs will now automatically suspend themselves, and resume
    as necessary.  This saves a certain amount of power on most
    systems, and matches what UHCI has been doing for a while.

The large size of this patch is mostly because of moving that
root hub suspend/resume code out of the PCI-specific glue.
parent 12423061
......@@ -117,6 +117,8 @@
/* For initializing controller (mask in an HCFS mode too) */
#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
#define OHCI_INTR_INIT \
(OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_WDH)
/*-------------------------------------------------------------------------*/
......@@ -515,8 +517,11 @@ static int hc_start (struct ohci_hcd *ohci)
writel (ohci->hc_control, &ohci->regs->control);
ohci->hcd.state = USB_STATE_RUNNING;
/* wake on ConnectStatusChange, matching external hubs */
writel (RH_HS_DRWE, &ohci->regs->roothub.status);
/* Choose the interrupts we care about now, others later on demand */
mask = OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_WDH;
mask = OHCI_INTR_INIT;
writel (mask, &ohci->regs->intrstatus);
writel (mask, &ohci->regs->intrenable);
......@@ -612,6 +617,11 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
hc_reset (ohci);
}
if (ints & OHCI_INTR_RD) {
ohci_vdbg (ohci, "resume detect\n");
schedule_work(&ohci->rh_resume);
}
if (ints & OHCI_INTR_WDH) {
if (HCD_IS_RUNNING(hcd->state))
writel (OHCI_INTR_WDH, &regs->intrdisable);
......@@ -657,6 +667,7 @@ static void ohci_stop (struct usb_hcd *hcd)
ohci->hcd.state);
ohci_dump (ohci, 1);
flush_scheduled_work();
if (HCD_IS_RUNNING(ohci->hcd.state))
hc_reset (ohci);
......
......@@ -60,6 +60,261 @@ static u32 roothub_portstatus (struct ohci_hcd *hc, int i)
(temp & RH_PS_CCS) ? " CCS" : "" \
);
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
static void dl_done_list (struct ohci_hcd *, struct pt_regs *);
static void finish_unlinks (struct ohci_hcd *, u16 , struct pt_regs *);
static int ohci_hub_suspend (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
struct usb_device *root = hcd_to_bus (&ohci->hcd)->root_hub;
int status = 0;
if (root->dev.power.power_state != 0)
return 0;
if (time_before (jiffies, ohci->next_statechange))
return -EAGAIN;
spin_lock_irq (&ohci->lock);
ohci->hc_control = readl (&ohci->regs->control);
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_RESUME:
ohci_dbg (ohci, "resume/suspend?\n");
ohci->hc_control &= ~OHCI_CTRL_HCFS;
ohci->hc_control |= OHCI_USB_RESET;
writel (ohci->hc_control, &ohci->regs->control);
(void) readl (&ohci->regs->control);
/* FALL THROUGH */
case OHCI_USB_RESET:
status = -EBUSY;
ohci_dbg (ohci, "needs reinit!\n");
goto done;
case OHCI_USB_SUSPEND:
ohci_dbg (ohci, "already suspended?\n");
goto succeed;
}
ohci_dbg (ohci, "suspend root hub\n");
/* First stop any processing */
ohci->hcd.state = USB_STATE_QUIESCING;
if (ohci->hc_control & OHCI_SCHED_ENABLES) {
int limit;
ohci->hc_control &= ~OHCI_SCHED_ENABLES;
writel (ohci->hc_control, &ohci->regs->control);
ohci->hc_control = readl (&ohci->regs->control);
writel (OHCI_INTR_SF, &ohci->regs->intrstatus);
/* sched disables take effect on the next frame,
* then the last WDH could take 6+ msec
*/
ohci_dbg (ohci, "stopping schedules ...\n");
limit = 2000;
while (limit > 0) {
udelay (250);
limit =- 250;
if (readl (&ohci->regs->intrstatus) & OHCI_INTR_SF)
break;
}
dl_done_list (ohci, 0);
mdelay (7);
}
dl_done_list (ohci, 0);
finish_unlinks (ohci, OHCI_FRAME_NO(ohci->hcca), 0);
writel (readl (&ohci->regs->intrstatus), &ohci->regs->intrstatus);
/* maybe resume can wake root hub */
if (ohci->hcd.remote_wakeup)
ohci->hc_control |= OHCI_CTRL_RWE;
else
ohci->hc_control &= ~OHCI_CTRL_RWE;
/* Suspend hub */
ohci->hc_control &= ~OHCI_CTRL_HCFS;
ohci->hc_control |= OHCI_USB_SUSPEND;
writel (ohci->hc_control, &ohci->regs->control);
(void) readl (&ohci->regs->control);
/* no resumes until devices finish suspending */
ohci->next_statechange = jiffies + MSEC_TO_JIFFIES (5);
succeed:
/* it's not USB_STATE_SUSPENDED unless access to this
* hub from the non-usb side (PCI, SOC, etc) stopped
*/
root->dev.power.power_state = 3;
done:
spin_unlock_irq (&ohci->lock);
return status;
}
static inline struct ed *find_head (struct ed *ed)
{
/* for bulk and control lists */
while (ed->ed_prev)
ed = ed->ed_prev;
return ed;
}
static int hc_restart (struct ohci_hcd *ohci);
/* caller owns root->serialize */
static int ohci_hub_resume (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
struct usb_device *root = hcd_to_bus (&ohci->hcd)->root_hub;
u32 temp, enables;
int status = -EINPROGRESS;
if (!root->dev.power.power_state)
return 0;
if (time_before (jiffies, ohci->next_statechange))
return -EAGAIN;
spin_lock_irq (&ohci->lock);
ohci->hc_control = readl (&ohci->regs->control);
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_SUSPEND:
ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
ohci->hc_control |= OHCI_USB_RESUME;
writel (ohci->hc_control, &ohci->regs->control);
(void) readl (&ohci->regs->control);
ohci_dbg (ohci, "resume root hub\n");
break;
case OHCI_USB_RESUME:
/* HCFS changes sometime after INTR_RD */
ohci_info (ohci, "remote wakeup\n");
break;
case OHCI_USB_OPER:
ohci_dbg (ohci, "odd resume\n");
root->dev.power.power_state = 0;
status = 0;
break;
default: /* RESET, we lost power */
ohci_dbg (ohci, "root hub hardware reset\n");
status = -EBUSY;
}
spin_unlock_irq (&ohci->lock);
if (status == -EBUSY)
return hc_restart (ohci);
if (status != -EINPROGRESS)
return status;
temp = roothub_a (ohci) & RH_A_NDP;
enables = 0;
while (temp--) {
u32 stat = readl (&ohci->regs->roothub.portstatus [temp]);
/* force global, not selective, resume */
if (!(stat & RH_PS_PSS))
continue;
writel (RH_PS_POCI, &ohci->regs->roothub.portstatus [temp]);
}
/* Some controllers (lucent) need extra-long delays */
ohci->hcd.state = USB_STATE_RESUMING;
mdelay (20 /* usb 11.5.1.10 */ + 15);
temp = readl (&ohci->regs->control);
temp &= OHCI_CTRL_HCFS;
if (temp != OHCI_USB_RESUME) {
ohci_err (ohci, "controller won't resume\n");
return -EBUSY;
}
/* disable old schedule state, reinit from scratch */
writel (0, &ohci->regs->ed_controlhead);
writel (0, &ohci->regs->ed_controlcurrent);
writel (0, &ohci->regs->ed_bulkhead);
writel (0, &ohci->regs->ed_bulkcurrent);
writel (0, &ohci->regs->ed_periodcurrent);
writel ((u32) ohci->hcca_dma, &ohci->regs->hcca);
periodic_reinit (ohci);
/* interrupts might have been disabled */
writel (OHCI_INTR_INIT, &ohci->regs->intrenable);
if (ohci->ed_rm_list)
writel (OHCI_INTR_SF, &ohci->regs->intrenable);
writel (readl (&ohci->regs->intrstatus), &ohci->regs->intrstatus);
/* Then re-enable operations */
writel (OHCI_USB_OPER, &ohci->regs->control);
(void) readl (&ohci->regs->control);
msec_delay (3);
temp = OHCI_CONTROL_INIT | OHCI_USB_OPER;
if (ohci->hcd.can_wakeup)
temp |= OHCI_CTRL_RWC;
ohci->hc_control = temp;
writel (temp, &ohci->regs->control);
(void) readl (&ohci->regs->control);
/* TRSMRCY */
msec_delay (10);
root->dev.power.power_state = 0;
/* keep it alive for ~5x suspend + resume costs */
ohci->next_statechange = jiffies + MSEC_TO_JIFFIES (250);
/* maybe turn schedules back on */
enables = 0;
temp = 0;
if (!ohci->ed_rm_list) {
if (ohci->ed_controltail) {
writel (find_head (ohci->ed_controltail)->dma,
&ohci->regs->ed_controlhead);
enables |= OHCI_CTRL_CLE;
temp |= OHCI_CLF;
}
if (ohci->ed_bulktail) {
writel (find_head (ohci->ed_bulktail)->dma,
&ohci->regs->ed_bulkhead);
enables |= OHCI_CTRL_BLE;
temp |= OHCI_BLF;
}
}
if (hcd_to_bus (&ohci->hcd)->bandwidth_isoc_reqs
|| hcd_to_bus (&ohci->hcd)->bandwidth_int_reqs)
enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
if (enables) {
ohci_dbg (ohci, "restarting schedules ... %08x\n", enables);
ohci->hc_control |= enables;
writel (ohci->hc_control, &ohci->regs->control);
if (temp)
writel (status, &ohci->regs->cmdstatus);
(void) readl (&ohci->regs->control);
}
ohci->hcd.state = USB_STATE_RUNNING;
return 0;
}
static void ohci_rh_resume (void *_hcd)
{
struct usb_hcd *hcd = _hcd;
down (&hcd->self.root_hub->serialize);
(void) ohci_hub_resume (hcd);
up (&hcd->self.root_hub->serialize);
}
#else
static void ohci_rh_resume (void *_hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci_dbg(ohci, "rh_resume ??\n");
}
#endif /* CONFIG_USB_SUSPEND || CONFIG_PM */
/*-------------------------------------------------------------------------*/
......@@ -70,6 +325,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ports, i, changed = 0, length = 1;
int can_suspend = 1;
ports = roothub_a (ohci) & RH_A_NDP;
if (ports > MAX_ROOT_PORTS) {
......@@ -95,16 +351,44 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
for (i = 0; i < ports; i++) {
u32 status = roothub_portstatus (ohci, i);
status &= RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
| RH_PS_OCIC | RH_PS_PRSC;
if (status) {
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
| RH_PS_OCIC | RH_PS_PRSC)) {
changed = 1;
if (i < 7)
buf [0] |= 1 << (i + 1);
else
buf [1] |= 1 << (i - 7);
continue;
}
/* can suspend if no ports are enabled; or if all all
* enabled ports are suspended AND remote wakeup is on.
*/
if (!(status & RH_PS_CCS))
continue;
if ((status & RH_PS_PSS) && ohci->hcd.remote_wakeup)
continue;
can_suspend = 0;
}
#ifdef CONFIG_PM
/* save power by suspending idle root hubs;
* INTR_RD wakes us when there's work
*/
if (can_suspend
&& !changed
&& !ohci->ed_rm_list
&& ((OHCI_CTRL_HCFS | OHCI_SCHED_ENABLES)
& ohci->hc_control)
== OHCI_USB_OPER
&& down_trylock (&hcd->self.root_hub->serialize) == 0
) {
ohci_vdbg (ohci, "autosuspend\n");
(void) ohci_hub_suspend (&ohci->hcd);
up (&hcd->self.root_hub->serialize);
}
#endif
return changed ? length : 0;
}
......@@ -188,6 +472,9 @@ static int ohci_hub_control (
break;
case USB_PORT_FEAT_SUSPEND:
temp = RH_PS_POCI;
if ((ohci->hc_control & OHCI_CTRL_HCFS)
!= OHCI_USB_OPER)
schedule_work (&ohci->rh_resume);
break;
case USB_PORT_FEAT_C_SUSPEND:
temp = RH_PS_PSSC;
......
......@@ -33,6 +33,7 @@ static struct usb_hcd *ohci_hcd_alloc (void)
ohci->hcd.product_desc = "OHCI Host Controller";
spin_lock_init (&ohci->lock);
INIT_LIST_HEAD (&ohci->pending);
INIT_WORK (&ohci->rh_resume, ohci_rh_resume, &ohci->hcd);
return &ohci->hcd;
}
return 0;
......
......@@ -36,6 +36,7 @@ ohci_pci_reset (struct usb_hcd *hcd)
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci->regs = hcd->regs;
ohci->next_statechange = jiffies;
return hc_reset (ohci);
}
......@@ -118,74 +119,25 @@ ohci_pci_start (struct usb_hcd *hcd)
static int ohci_pci_suspend (struct usb_hcd *hcd, u32 state)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
u16 cmd;
u32 tmp;
if ((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER) {
ohci_dbg (ohci, "can't suspend (state is %s)\n",
hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS));
return -EIO;
}
/* suspend root hub, hoping it keeps power during suspend */
while (time_before (jiffies, ohci->next_statechange))
msec_delay (100);
#ifdef CONFIG_USB_SUSPEND
(void) usb_suspend_device (hcd->self.root_hub);
#else
/* FIXME lock root hub */
(void) ohci_hub_suspend (hcd);
#endif
/* act as if usb suspend can always be used */
ohci_dbg (ohci, "suspend to %d\n", state);
/* let things settle down a bit */
msec_delay (100);
/* First stop processing */
spin_lock_irq (&ohci->lock);
ohci->hc_control &=
~(OHCI_CTRL_PLE|OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_IE);
writel (ohci->hc_control, &ohci->regs->control);
writel (OHCI_INTR_SF, &ohci->regs->intrstatus);
(void) readl (&ohci->regs->intrstatus);
spin_unlock_irq (&ohci->lock);
/* Wait a frame or two */
mdelay (1);
if (!readl (&ohci->regs->intrstatus) & OHCI_INTR_SF)
mdelay (1);
#ifdef CONFIG_PMAC_PBOOK
if (_machine == _MACH_Pmac)
disable_irq ((to_pci_dev(hcd->self.controller))->irq);
/* else, 2.4 assumes shared irqs -- don't disable */
#endif
/* Enable remote wakeup */
writel (readl (&ohci->regs->intrenable) | OHCI_INTR_RD,
&ohci->regs->intrenable);
/* Suspend chip and let things settle down a bit */
spin_lock_irq (&ohci->lock);
ohci->hc_control = OHCI_USB_SUSPEND;
writel (ohci->hc_control, &ohci->regs->control);
(void) readl (&ohci->regs->control);
spin_unlock_irq (&ohci->lock);
set_current_state (TASK_UNINTERRUPTIBLE);
schedule_timeout (HZ/2);
tmp = readl (&ohci->regs->control) | OHCI_CTRL_HCFS;
switch (tmp) {
case OHCI_USB_RESET:
case OHCI_USB_RESUME:
case OHCI_USB_OPER:
ohci_err (ohci, "can't suspend; hcfs %d\n", tmp);
break;
case OHCI_USB_SUSPEND:
ohci_dbg (ohci, "suspended\n");
break;
}
/* In some rare situations, Apple's OHCI have happily trashed
* memory during sleep. We disable its bus master bit during
* suspend
*/
pci_read_config_word (to_pci_dev(hcd->self.controller), PCI_COMMAND,
&cmd);
cmd &= ~PCI_COMMAND_MASTER;
pci_write_config_word (to_pci_dev(hcd->self.controller), PCI_COMMAND,
cmd);
#ifdef CONFIG_PMAC_PBOOK
{
struct device_node *of_node;
......@@ -202,7 +154,6 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, u32 state)
static int ohci_pci_resume (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int temp;
int retval = 0;
#ifdef CONFIG_PMAC_PBOOK
......@@ -215,92 +166,25 @@ static int ohci_pci_resume (struct usb_hcd *hcd)
pmac_call_feature (PMAC_FTR_USB_ENABLE, of_node, 0, 1);
}
#endif
/* did we suspend, or were we powered off? */
ohci->hc_control = readl (&ohci->regs->control);
temp = ohci->hc_control & OHCI_CTRL_HCFS;
#ifdef DEBUG
/* the registers may look crazy here */
ohci_dump_status (ohci, 0, 0);
/* resume root hub */
while (time_before (jiffies, ohci->next_statechange))
msec_delay (100);
#ifdef CONFIG_USB_SUSPEND
/* get extra cleanup even if remote wakeup isn't in use */
retval = usb_resume_device (hcd->self.root_hub);
#else
down (&hcd->self.root_hub->serialize);
retval = ohci_hub_resume (hcd);
up (&hcd->self.root_hub->serialize);
#endif
/* Re-enable bus mastering */
pci_set_master (to_pci_dev(ohci->hcd.self.controller));
switch (temp) {
case OHCI_USB_RESET: // lost power
restart:
ohci_info (ohci, "USB restart\n");
retval = hc_restart (ohci);
break;
case OHCI_USB_SUSPEND: // host wakeup
case OHCI_USB_RESUME: // remote wakeup
ohci_info (ohci, "USB continue from %s wakeup\n",
(temp == OHCI_USB_SUSPEND)
? "host" : "remote");
/* we "should" only need RESUME if we're SUSPENDed ... */
ohci->hc_control = OHCI_USB_RESUME;
writel (ohci->hc_control, &ohci->regs->control);
(void) readl (&ohci->regs->control);
/* Some controllers (lucent) need extra-long delays */
mdelay (35); /* no schedule here ! */
temp = readl (&ohci->regs->control);
temp = ohci->hc_control & OHCI_CTRL_HCFS;
if (temp != OHCI_USB_RESUME) {
ohci_err (ohci, "controller won't resume\n");
/* maybe we can reset */
goto restart;
}
/* Then re-enable operations */
writel (OHCI_USB_OPER, &ohci->regs->control);
(void) readl (&ohci->regs->control);
mdelay (3);
spin_lock_irq (&ohci->lock);
ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
if (!ohci->ed_rm_list) {
if (ohci->ed_controltail)
ohci->hc_control |= OHCI_CTRL_CLE;
if (ohci->ed_bulktail)
ohci->hc_control |= OHCI_CTRL_BLE;
}
if (hcd_to_bus (&ohci->hcd)->bandwidth_isoc_reqs
|| hcd_to_bus (&ohci->hcd)->bandwidth_int_reqs)
ohci->hc_control |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
hcd->state = USB_STATE_RUNNING;
writel (ohci->hc_control, &ohci->regs->control);
/* trigger a start-frame interrupt (why?) */
writel (OHCI_INTR_SF, &ohci->regs->intrstatus);
writel (OHCI_INTR_SF, &ohci->regs->intrenable);
writel (OHCI_INTR_WDH, &ohci->regs->intrdisable);
(void) readl (&ohci->regs->intrdisable);
/* Check for a pending done list */
if (ohci->hcca->done_head)
dl_done_list (ohci, NULL);
spin_unlock_irq (&ohci->lock);
if (retval == 0) {
hcd->self.controller->power.power_state = 0;
#ifdef CONFIG_PMAC_PBOOK
if (_machine == _MACH_Pmac)
enable_irq (to_pci_dev(hcd->self.controller)->irq);
#endif
writel (OHCI_INTR_WDH, &ohci->regs->intrenable);
/* assume there are TDs on the bulk and control lists */
writel (OHCI_BLF | OHCI_CLF, &ohci->regs->cmdstatus);
break;
default:
ohci_warn (ohci, "odd PCI resume\n");
}
return retval;
}
......
......@@ -372,8 +372,11 @@ struct ohci_hcd {
*/
int load [NUM_INTS];
u32 hc_control; /* copy of hc control reg */
unsigned long next_statechange; /* suspend/resume */
u32 fminterval; /* saved register */
struct work_struct rh_resume;
unsigned long flags; /* for HC bugs */
#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */
#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */
......@@ -404,7 +407,7 @@ static inline void msec_delay(int msec)
#define FI 0x2edf /* 12000 bits per frame (-1) */
#define DEFAULT_FMINTERVAL ((((6 * (FI - 210)) / 7) << 16) | FI)
#define LSTHRESH 0x628 /* lowspeed bit threshold */
#define LSTHRESH 0x628 /* lowspeed bit threshold */
static inline void periodic_reinit (struct ohci_hcd *ohci)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment