Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (27 commits)
  Regulators: wm8400 - cleanup platform driver data handling
  Regulators: wm8994 - clean up driver data after removal
  Regulators: wm831x-xxx - clean up driver data after removal
  Regulators: pcap-regulator - clean up driver data after removal
  Regulators: max8660 - annotate probe and remove methods
  Regulators: max1586 - annotate probe and remove methods
  Regulators: lp3971 - fail if platform data was not supplied
  Regulators: tps6507x-regulator - mark probe method as __devinit
  Regulators: tps65023-regulator - mark probe method as __devinit
  Regulators: twl-regulator - mark probe function as __devinit
  Regulators: fixed - annotate probe and remove methods
  Regulators: ab3100 - fix probe and remove annotations
  Regulators: virtual - use sysfs attribute groups
  twl6030: regulator: Configure STATE register instead of REMAP
  regulator: Provide optional dummy regulator for consumers
  regulator: Assume regulators are enabled if they don't report anything
  regulator: Convert fixed voltage regulator to use enable_time()
  regulator: Add WM8994 regulator support
  regulator: enable max8649 regulator driver
  regulator: trivial: fix typos in user-visible Kconfig text
  ...

drivers/regulator/Kconfig

@@ -27,6 +27,17 @@ config REGULATOR_DEBUG
 	help
 	  Say yes here to enable debugging support.
 
+config REGULATOR_DUMMY
+	bool "Provide a dummy regulator if regulator lookups fail"
+	help
+	  If this option is enabled then when a regulator lookup fails
+	  and the board has not specified that it has provided full
+	  constraints then the regulator core will provide an always
+	  enabled dummy regulator will be provided, allowing consumer
+	  drivers to continue.
+
+	  A warning will be generated when this substitution is done.
+
 config REGULATOR_FIXED_VOLTAGE
 	tristate "Fixed voltage regulator support"
 	help
@@ -69,6 +80,13 @@ config REGULATOR_MAX1586
 	  regulator via I2C bus. The provided regulator is suitable
 	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 
+config REGULATOR_MAX8649
+	tristate "Maxim 8649 voltage regulator"
+	depends on I2C
+	help
+	  This driver controls a Maxim 8649 voltage output regulator via
+	  I2C bus.
+
 config REGULATOR_MAX8660
 	tristate "Maxim 8660/8661 voltage regulator"
 	depends on I2C
@@ -91,19 +109,26 @@ config REGULATOR_WM831X
 	  of PMIC devices.
 
 config REGULATOR_WM8350
-	tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
+	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
 	depends on MFD_WM8350
 	help
 	  This driver provides support for the voltage and current regulators
           of the WM8350 AudioPlus PMIC.
 
 config REGULATOR_WM8400
-	tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC"
+	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
 	depends on MFD_WM8400
 	help
 	  This driver provides support for the voltage regulators of the
 	  WM8400 AudioPlus PMIC.
 
+config REGULATOR_WM8994
+	tristate "Wolfson Microelectronics WM8994 CODEC"
+	depends on MFD_WM8994
+	help
+	  This driver provides support for the voltage regulators on the
+	  WM8994 CODEC.
+
 config REGULATOR_DA903X
 	tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
 	depends on PMIC_DA903X

drivers/regulator/Makefile

@@ -9,15 +9,18 @@ obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
 obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
 obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
+obj-$(CONFIG_REGULATOR_DUMMY) += dummy.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
+obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
 obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
 obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
+obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o

drivers/regulator/ab3100.c

@@ -561,7 +561,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
  * for all the different regulators.
  */
 
-static int __init ab3100_regulators_probe(struct platform_device *pdev)
+static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
 {
 	struct ab3100_platform_data *plfdata = pdev->dev.platform_data;
 	struct ab3100 *ab3100 = platform_get_drvdata(pdev);
@@ -641,7 +641,7 @@ static int __init ab3100_regulators_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __exit ab3100_regulators_remove(struct platform_device *pdev)
+static int __devexit ab3100_regulators_remove(struct platform_device *pdev)
 {
 	int i;
 
@@ -659,7 +659,7 @@ static struct platform_driver ab3100_regulators_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = ab3100_regulators_probe,
-	.remove = __exit_p(ab3100_regulators_remove),
+	.remove = __devexit_p(ab3100_regulators_remove),
 };
 
 static __init int ab3100_regulators_init(void)

drivers/regulator/core.c

@@ -19,10 +19,13 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/suspend.h>
+#include <linux/delay.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 
+#include "dummy.h"
+
 #define REGULATOR_VERSION "0.5"
 
 static DEFINE_MUTEX(regulator_list_mutex);
@@ -1084,6 +1087,13 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 	return NULL;
 }
 
+static int _regulator_get_enable_time(struct regulator_dev *rdev)
+{
+	if (!rdev->desc->ops->enable_time)
+		return 0;
+	return rdev->desc->ops->enable_time(rdev);
+}
+
 /* Internal regulator request function */
 static struct regulator *_regulator_get(struct device *dev, const char *id,
 					int exclusive)
@@ -1115,6 +1125,22 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 			goto found;
 		}
 	}
+
+#ifdef CONFIG_REGULATOR_DUMMY
+	if (!devname)
+		devname = "deviceless";
+
+	/* If the board didn't flag that it was fully constrained then
+	 * substitute in a dummy regulator so consumers can continue.
+	 */
+	if (!has_full_constraints) {
+		pr_warning("%s supply %s not found, using dummy regulator\n",
+			   devname, id);
+		rdev = dummy_regulator_rdev;
+		goto found;
+	}
+#endif
+
 	mutex_unlock(&regulator_list_mutex);
 	return regulator;
 
@@ -1251,7 +1277,7 @@ static int _regulator_can_change_status(struct regulator_dev *rdev)
 /* locks held by regulator_enable() */
 static int _regulator_enable(struct regulator_dev *rdev)
 {
-	int ret;
+	int ret, delay;
 
 	/* do we need to enable the supply regulator first */
 	if (rdev->supply) {
@@ -1275,13 +1301,34 @@ static int _regulator_enable(struct regulator_dev *rdev)
 			if (!_regulator_can_change_status(rdev))
 				return -EPERM;
 
-			if (rdev->desc->ops->enable) {
-				ret = rdev->desc->ops->enable(rdev);
-				if (ret < 0)
-					return ret;
-			} else {
+			if (!rdev->desc->ops->enable)
 				return -EINVAL;
+
+			/* Query before enabling in case configuration
+			 * dependant.  */
+			ret = _regulator_get_enable_time(rdev);
+			if (ret >= 0) {
+				delay = ret;
+			} else {
+				printk(KERN_WARNING
+					"%s: enable_time() failed for %s: %d\n",
+					__func__, rdev_get_name(rdev),
+					ret);
+				delay = 0;
 			}
+
+			/* Allow the regulator to ramp; it would be useful
+			 * to extend this for bulk operations so that the
+			 * regulators can ramp together.  */
+			ret = rdev->desc->ops->enable(rdev);
+			if (ret < 0)
+				return ret;
+
+			if (delay >= 1000)
+				mdelay(delay / 1000);
+			else if (delay)
+				udelay(delay);
+
 		} else if (ret < 0) {
 			printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n",
 			       __func__, rdev_get_name(rdev), ret);
@@ -1341,6 +1388,9 @@ static int _regulator_disable(struct regulator_dev *rdev)
 				       __func__, rdev_get_name(rdev));
 				return ret;
 			}
+
+			_notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
+					     NULL);
 		}
 
 		/* decrease our supplies ref count and disable if required */
@@ -1399,8 +1449,8 @@ static int _regulator_force_disable(struct regulator_dev *rdev)
 			return ret;
 		}
 		/* notify other consumers that power has been forced off */
-		_notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE,
-			NULL);
+		_notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
+			REGULATOR_EVENT_DISABLE, NULL);
 	}
 
 	/* decrease our supplies ref count and disable if required */
@@ -1434,9 +1484,9 @@ EXPORT_SYMBOL_GPL(regulator_force_disable);
 
 static int _regulator_is_enabled(struct regulator_dev *rdev)
 {
-	/* sanity check */
+	/* If we don't know then assume that the regulator is always on */
 	if (!rdev->desc->ops->is_enabled)
-		return -EINVAL;
+		return 1;
 
 	return rdev->desc->ops->is_enabled(rdev);
 }
@@ -2451,8 +2501,15 @@ EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
 
 static int __init regulator_init(void)
 {
+	int ret;
+
 	printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION);
-	return class_register(&regulator_class);
+
+	ret = class_register(&regulator_class);
+
+	regulator_dummy_init();
+
+	return ret;
 }
 
 /* init early to allow our consumers to complete system booting */

drivers/regulator/dummy.c

+/*
+ * dummy.c
+ *
+ * Copyright 2010 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#include "dummy.h"
+
+struct regulator_dev *dummy_regulator_rdev;
+
+static struct regulator_init_data dummy_initdata;
+
+static struct regulator_ops dummy_ops;
+
+static struct regulator_desc dummy_desc = {
+	.name = "dummy",
+	.id = -1,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.ops = &dummy_ops,
+};
+
+static struct platform_device *dummy_pdev;
+
+void __init regulator_dummy_init(void)
+{
+	int ret;
+
+	dummy_pdev = platform_device_alloc("reg-dummy", -1);
+	if (!dummy_pdev) {
+		pr_err("Failed to allocate dummy regulator device\n");
+		return;
+	}
+
+	ret = platform_device_add(dummy_pdev);
+	if (ret != 0) {
+		pr_err("Failed to register dummy regulator device: %d\n", ret);
+		platform_device_put(dummy_pdev);
+		return;
+	}
+
+	dummy_regulator_rdev = regulator_register(&dummy_desc, NULL,
+						  &dummy_initdata, NULL);
+	if (IS_ERR(dummy_regulator_rdev)) {
+		ret = PTR_ERR(dummy_regulator_rdev);
+		pr_err("Failed to register regulator: %d\n", ret);
+		platform_device_unregister(dummy_pdev);
+		return;
+	}
+}

drivers/regulator/dummy.h

+/*
+ * dummy.h
+ *
+ * Copyright 2010 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#ifndef _DUMMY_H
+#define _DUMMY_H
+
+struct regulator_dev;
+
+extern struct regulator_dev *dummy_regulator_rdev;
+
+#ifdef CONFIG_REGULATOR_DUMMY
+void __init regulator_dummy_init(void);
+#else
+static inline void regulator_dummy_init(void) { }
+#endif
+
+#endif

drivers/regulator/fixed.c

@@ -24,14 +24,16 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/fixed.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 
 struct fixed_voltage_data {
 	struct regulator_desc desc;
 	struct regulator_dev *dev;
 	int microvolts;
 	int gpio;
-	unsigned enable_high:1;
-	unsigned is_enabled:1;
+	unsigned startup_delay;
+	bool enable_high;
+	bool is_enabled;
 };
 
 static int fixed_voltage_is_enabled(struct regulator_dev *dev)
@@ -47,7 +49,7 @@ static int fixed_voltage_enable(struct regulator_dev *dev)
 
 	if (gpio_is_valid(data->gpio)) {
 		gpio_set_value_cansleep(data->gpio, data->enable_high);
-		data->is_enabled = 1;
+		data->is_enabled = true;
 	}
 
 	return 0;
@@ -59,12 +61,19 @@ static int fixed_voltage_disable(struct regulator_dev *dev)
 
 	if (gpio_is_valid(data->gpio)) {
 		gpio_set_value_cansleep(data->gpio, !data->enable_high);
-		data->is_enabled = 0;
+		data->is_enabled = false;
 	}
 
 	return 0;
 }
 
+static int fixed_voltage_enable_time(struct regulator_dev *dev)
+{
+	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+	return data->startup_delay;
+}
+
 static int fixed_voltage_get_voltage(struct regulator_dev *dev)
 {
 	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
@@ -87,11 +96,12 @@ static struct regulator_ops fixed_voltage_ops = {
 	.is_enabled = fixed_voltage_is_enabled,
 	.enable = fixed_voltage_enable,
 	.disable = fixed_voltage_disable,
+	.enable_time = fixed_voltage_enable_time,
 	.get_voltage = fixed_voltage_get_voltage,
 	.list_voltage = fixed_voltage_list_voltage,
 };
 
-static int regulator_fixed_voltage_probe(struct platform_device *pdev)
+static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
 {
 	struct fixed_voltage_config *config = pdev->dev.platform_data;
 	struct fixed_voltage_data *drvdata;
@@ -117,6 +127,7 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev)
 
 	drvdata->microvolts = config->microvolts;
 	drvdata->gpio = config->gpio;
+	drvdata->startup_delay = config->startup_delay;
 
 	if (gpio_is_valid(config->gpio)) {
 		drvdata->enable_high = config->enable_high;
@@ -163,7 +174,7 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev)
 		/* Regulator without GPIO control is considered
 		 * always enabled
 		 */
-		drvdata->is_enabled = 1;
+		drvdata->is_enabled = true;
 	}
 
 	drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
@@ -191,7 +202,7 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int regulator_fixed_voltage_remove(struct platform_device *pdev)
+static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev)
 {
 	struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
 
@@ -205,10 +216,11 @@ static int regulator_fixed_voltage_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver regulator_fixed_voltage_driver = {
-	.probe		= regulator_fixed_voltage_probe,
-	.remove		= regulator_fixed_voltage_remove,
+	.probe		= reg_fixed_voltage_probe,
+	.remove		= __devexit_p(reg_fixed_voltage_remove),
 	.driver		= {
 		.name		= "reg-fixed-voltage",
+		.owner		= THIS_MODULE,
 	},
 };
 

drivers/regulator/lp3971.c

@@ -54,7 +54,7 @@ static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val);
 #define LP3971_BUCK2_BASE 0x29
 #define LP3971_BUCK3_BASE 0x32
 
-const static int buck_base_addr[] = {
+static const int buck_base_addr[] = {
 	LP3971_BUCK1_BASE,
 	LP3971_BUCK2_BASE,
 	LP3971_BUCK3_BASE,
@@ -63,7 +63,7 @@ const static int buck_base_addr[] = {
 #define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
 #define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
 
-const static int buck_voltage_map[] = {
+static const int buck_voltage_map[] = {
 	   0,  800,  850,  900,  950, 1000, 1050, 1100,
 	1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
 	1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
@@ -96,17 +96,17 @@ const static int buck_voltage_map[] = {
 #define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
 #define LDO_VOL_CONTR_MASK 0x0f
 
-const static int ldo45_voltage_map[] = {
+static const int ldo45_voltage_map[] = {
 	1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
 	1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
 };
 
-const static int ldo123_voltage_map[] = {
+static const int ldo123_voltage_map[] = {
 	1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
 	2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
 };
 
-const static int *ldo_voltage_map[] = {
+static const int *ldo_voltage_map[] = {
 	ldo123_voltage_map, /* LDO1 */
 	ldo123_voltage_map, /* LDO2 */
 	ldo123_voltage_map, /* LDO3 */
@@ -431,20 +431,20 @@ static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val)
 	return ret;
 }
 
-static int setup_regulators(struct lp3971 *lp3971,
-	struct lp3971_platform_data *pdata)
+static int __devinit setup_regulators(struct lp3971 *lp3971,
+				      struct lp3971_platform_data *pdata)
 {
 	int i, err;
-	int num_regulators = pdata->num_regulators;
-	lp3971->num_regulators = num_regulators;
-	lp3971->rdev = kzalloc(sizeof(struct regulator_dev *) * num_regulators,
-		GFP_KERNEL);
+
+	lp3971->num_regulators = pdata->num_regulators;
+	lp3971->rdev = kcalloc(pdata->num_regulators,
+				sizeof(struct regulator_dev *), GFP_KERNEL);
 
 	/* Instantiate the regulators */
-	for (i = 0; i < num_regulators; i++) {
-		int id = pdata->regulators[i].id;
-		lp3971->rdev[i] = regulator_register(&regulators[id],
-			lp3971->dev, pdata->regulators[i].initdata, lp3971);
+	for (i = 0; i < pdata->num_regulators; i++) {
+		struct lp3971_regulator_subdev *reg = &pdata->regulators[i];
+		lp3971->rdev[i] = regulator_register(&regulators[reg->id],
+					lp3971->dev, reg->initdata, lp3971);
 
 		if (IS_ERR(lp3971->rdev[i])) {
 			err = PTR_ERR(lp3971->rdev[i]);
@@ -455,10 +455,10 @@ static int setup_regulators(struct lp3971 *lp3971,
 	}
 
 	return 0;
+
 error:
-	for (i = 0; i < num_regulators; i++)
-		if (lp3971->rdev[i])
-			regulator_unregister(lp3971->rdev[i]);
+	while (--i >= 0)
+		regulator_unregister(lp3971->rdev[i]);
 	kfree(lp3971->rdev);
 	lp3971->rdev = NULL;
 	return err;
@@ -472,15 +472,17 @@ static int __devinit lp3971_i2c_probe(struct i2c_client *i2c,
 	int ret;
 	u16 val;
 
-	lp3971 = kzalloc(sizeof(struct lp3971), GFP_KERNEL);
-	if (lp3971 == NULL) {
-		ret = -ENOMEM;
-		goto err;
+	if (!pdata) {
+		dev_dbg(&i2c->dev, "No platform init data supplied\n");
+		return -ENODEV;
 	}
 
+	lp3971 = kzalloc(sizeof(struct lp3971), GFP_KERNEL);
+	if (lp3971 == NULL)
+		return -ENOMEM;
+
 	lp3971->i2c = i2c;
 	lp3971->dev = &i2c->dev;
-	i2c_set_clientdata(i2c, lp3971);
 
 	mutex_init(&lp3971->io_lock);
 
@@ -493,19 +495,15 @@ static int __devinit lp3971_i2c_probe(struct i2c_client *i2c,
 		goto err_detect;
 	}
 
-	if (pdata) {
-		ret = setup_regulators(lp3971, pdata);
-		if (ret < 0)
-			goto err_detect;
-	} else
-		dev_warn(lp3971->dev, "No platform init data supplied\n");
+	ret = setup_regulators(lp3971, pdata);
+	if (ret < 0)
+		goto err_detect;
 
+	i2c_set_clientdata(i2c, lp3971);
 	return 0;
 
 err_detect:
-	i2c_set_clientdata(i2c, NULL);
 	kfree(lp3971);
-err:
 	return ret;
 }
 
@@ -513,11 +511,13 @@ static int __devexit lp3971_i2c_remove(struct i2c_client *i2c)
 {
 	struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
 	int i;
+
+	i2c_set_clientdata(i2c, NULL);
+
 	for (i = 0; i < lp3971->num_regulators; i++)
-		if (lp3971->rdev[i])
-			regulator_unregister(lp3971->rdev[i]);
+		regulator_unregister(lp3971->rdev[i]);
+
 	kfree(lp3971->rdev);
-	i2c_set_clientdata(i2c, NULL);
 	kfree(lp3971);
 
 	return 0;

drivers/regulator/max1586.c

@@ -179,8 +179,8 @@ static struct regulator_desc max1586_reg[] = {
 	},
 };
 
-static int max1586_pmic_probe(struct i2c_client *client,
-			      const struct i2c_device_id *i2c_id)
+static int __devinit max1586_pmic_probe(struct i2c_client *client,
+					const struct i2c_device_id *i2c_id)
 {
 	struct regulator_dev **rdev;
 	struct max1586_platform_data *pdata = client->dev.platform_data;
@@ -235,7 +235,7 @@ static int max1586_pmic_probe(struct i2c_client *client,
 	return ret;
 }
 
-static int max1586_pmic_remove(struct i2c_client *client)
+static int __devexit max1586_pmic_remove(struct i2c_client *client)
 {
 	struct regulator_dev **rdev = i2c_get_clientdata(client);
 	int i;
@@ -257,9 +257,10 @@ MODULE_DEVICE_TABLE(i2c, max1586_id);
 
 static struct i2c_driver max1586_pmic_driver = {
 	.probe = max1586_pmic_probe,
-	.remove = max1586_pmic_remove,
+	.remove = __devexit_p(max1586_pmic_remove),
 	.driver		= {
 		.name	= "max1586",
+		.owner	= THIS_MODULE,
 	},
 	.id_table	= max1586_id,
 };

drivers/regulator/max8660.c

@@ -345,8 +345,8 @@ static struct regulator_desc max8660_reg[] = {
 	},
 };
 
-static int max8660_probe(struct i2c_client *client,
-			      const struct i2c_device_id *i2c_id)
+static int __devinit max8660_probe(struct i2c_client *client,
+				   const struct i2c_device_id *i2c_id)
 {
 	struct regulator_dev **rdev;
 	struct max8660_platform_data *pdata = client->dev.platform_data;
@@ -354,7 +354,7 @@ static int max8660_probe(struct i2c_client *client,
 	int boot_on, i, id, ret = -EINVAL;
 
 	if (pdata->num_subdevs > MAX8660_V_END) {
-		dev_err(&client->dev, "Too much regulators found!\n");
+		dev_err(&client->dev, "Too many regulators found!\n");
 		goto out;
 	}
 
@@ -462,7 +462,7 @@ static int max8660_probe(struct i2c_client *client,
 	return ret;
 }
 
-static int max8660_remove(struct i2c_client *client)
+static int __devexit max8660_remove(struct i2c_client *client)
 {
 	struct regulator_dev **rdev = i2c_get_clientdata(client);
 	int i;
@@ -485,9 +485,10 @@ MODULE_DEVICE_TABLE(i2c, max8660_id);
 
 static struct i2c_driver max8660_driver = {
 	.probe = max8660_probe,
-	.remove = max8660_remove,
+	.remove = __devexit_p(max8660_remove),
 	.driver		= {
 		.name	= "max8660",
+		.owner	= THIS_MODULE,
 	},
 	.id_table	= max8660_id,
 };

drivers/regulator/pcap-regulator.c

@@ -288,16 +288,18 @@ static int __devexit pcap_regulator_remove(struct platform_device *pdev)
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 
 	regulator_unregister(rdev);
+	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
 
 static struct platform_driver pcap_regulator_driver = {
 	.driver = {
-		.name = "pcap-regulator",
+		.name	= "pcap-regulator",
+		.owner	= THIS_MODULE,
 	},
-	.probe = pcap_regulator_probe,
-	.remove = __devexit_p(pcap_regulator_remove),
+	.probe	= pcap_regulator_probe,
+	.remove	= __devexit_p(pcap_regulator_remove),
 };
 
 static int __init pcap_regulator_init(void)

drivers/regulator/tps65023-regulator.c

@@ -457,8 +457,8 @@ static struct regulator_ops tps65023_ldo_ops = {
 	.list_voltage = tps65023_ldo_list_voltage,
 };
 
-static
-int tps_65023_probe(struct i2c_client *client, const struct i2c_device_id *id)
+static int __devinit tps_65023_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
 {
 	static int desc_id;
 	const struct tps_info *info = (void *)id->driver_data;
@@ -466,6 +466,7 @@ int tps_65023_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	struct regulator_dev *rdev;
 	struct tps_pmic *tps;
 	int i;
+	int error;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -EIO;
@@ -475,7 +476,6 @@ int tps_65023_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	 * coming from the board-evm file.
 	 */
 	init_data = client->dev.platform_data;
-
 	if (!init_data)
 		return -EIO;
 
@@ -502,21 +502,12 @@ int tps_65023_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 		/* Register the regulators */
 		rdev = regulator_register(&tps->desc[i], &client->dev,
-								init_data, tps);
+					  init_data, tps);
 		if (IS_ERR(rdev)) {
 			dev_err(&client->dev, "failed to register %s\n",
 				id->name);
-
-			/* Unregister */
-			while (i)
-				regulator_unregister(tps->rdev[--i]);
-
-			tps->client = NULL;
-
-			/* clear the client data in i2c */
-			i2c_set_clientdata(client, NULL);
-			kfree(tps);
-			return PTR_ERR(rdev);
+			error = PTR_ERR(rdev);
+			goto fail;
 		}
 
 		/* Save regulator for cleanup */
@@ -526,6 +517,13 @@ int tps_65023_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	i2c_set_clientdata(client, tps);
 
 	return 0;
+
+ fail:
+	while (--i >= 0)
+		regulator_unregister(tps->rdev[i]);
+
+	kfree(tps);
+	return error;
 }
 
 /**
@@ -539,13 +537,12 @@ static int __devexit tps_65023_remove(struct i2c_client *client)
 	struct tps_pmic *tps = i2c_get_clientdata(client);
 	int i;
 
+	/* clear the client data in i2c */
+	i2c_set_clientdata(client, NULL);
+
 	for (i = 0; i < TPS65023_NUM_REGULATOR; i++)
 		regulator_unregister(tps->rdev[i]);
 
-	tps->client = NULL;
-
-	/* clear the client data in i2c */
-	i2c_set_clientdata(client, NULL);
 	kfree(tps);
 
 	return 0;

drivers/regulator/tps6507x-regulator.c

@@ -538,8 +538,8 @@ static struct regulator_ops tps6507x_ldo_ops = {
 	.list_voltage = tps6507x_ldo_list_voltage,
 };
 
-static
-int tps_6507x_probe(struct i2c_client *client, const struct i2c_device_id *id)
+static int __devinit tps_6507x_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
 {
 	static int desc_id;
 	const struct tps_info *info = (void *)id->driver_data;
@@ -547,6 +547,7 @@ int tps_6507x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	struct regulator_dev *rdev;
 	struct tps_pmic *tps;
 	int i;
+	int error;
 
 	if (!i2c_check_functionality(client->adapter,
 				I2C_FUNC_SMBUS_BYTE_DATA))
@@ -557,7 +558,6 @@ int tps_6507x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	 * coming from the board-evm file.
 	 */
 	init_data = client->dev.platform_data;
-
 	if (!init_data)
 		return -EIO;
 
@@ -586,18 +586,8 @@ int tps_6507x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		if (IS_ERR(rdev)) {
 			dev_err(&client->dev, "failed to register %s\n",
 				id->name);
-
-			/* Unregister */
-			while (i)
-				regulator_unregister(tps->rdev[--i]);
-
-			tps->client = NULL;
-
-			/* clear the client data in i2c */
-			i2c_set_clientdata(client, NULL);
-
-			kfree(tps);
-			return PTR_ERR(rdev);
+			error = PTR_ERR(rdev);
+			goto fail;
 		}
 
 		/* Save regulator for cleanup */
@@ -607,6 +597,13 @@ int tps_6507x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	i2c_set_clientdata(client, tps);
 
 	return 0;
+
+fail:
+	while (--i >= 0)
+		regulator_unregister(tps->rdev[i]);
+
+	kfree(tps);
+	return error;
 }
 
 /**
@@ -620,13 +617,12 @@ static int __devexit tps_6507x_remove(struct i2c_client *client)
 	struct tps_pmic *tps = i2c_get_clientdata(client);
 	int i;
 
+	/* clear the client data in i2c */
+	i2c_set_clientdata(client, NULL);
+
 	for (i = 0; i < TPS6507X_NUM_REGULATOR; i++)
 		regulator_unregister(tps->rdev[i]);
 
-	tps->client = NULL;
-
-	/* clear the client data in i2c */
-	i2c_set_clientdata(client, NULL);
 	kfree(tps);
 
 	return 0;

drivers/regulator/twl-regulator.c

@@ -519,19 +519,19 @@ static struct twlreg_info twl_regs[] = {
 	/* 6030 REG with base as PMC Slave Misc : 0x0030 */
 	/* Turnon-delay and remap configuration values for 6030 are not
 	   verified since the specification is not public */
-	TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1, 0, 0x08),
-	TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2, 0, 0x08),
-	TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3, 0, 0x08),
-	TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4, 0, 0x08),
-	TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5, 0, 0x08),
-	TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7, 0, 0x08),
-	TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x08),
-	TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x08),
-	TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x08),
-	TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x08)
+	TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1, 0, 0x21),
+	TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2, 0, 0x21),
+	TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3, 0, 0x21),
+	TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4, 0, 0x21),
+	TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5, 0, 0x21),
+	TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7, 0, 0x21),
+	TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x21),
+	TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x21),
+	TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x21),
+	TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x21)
 };
 
-static int twlreg_probe(struct platform_device *pdev)
+static int __devinit twlreg_probe(struct platform_device *pdev)
 {
 	int				i;
 	struct twlreg_info		*info;

drivers/regulator/virtual.c

@@ -19,7 +19,7 @@
 struct virtual_consumer_data {
 	struct mutex lock;
 	struct regulator *regulator;
-	int enabled;
+	bool enabled;
 	int min_uV;
 	int max_uV;
 	int min_uA;
@@ -49,7 +49,7 @@ static void update_voltage_constraints(struct device *dev,
 		dev_dbg(dev, "Enabling regulator\n");
 		ret = regulator_enable(data->regulator);
 		if (ret == 0)
-			data->enabled = 1;
+			data->enabled = true;
 		else
 			dev_err(dev, "regulator_enable() failed: %d\n",
 				ret);
@@ -59,7 +59,7 @@ static void update_voltage_constraints(struct device *dev,
 		dev_dbg(dev, "Disabling regulator\n");
 		ret = regulator_disable(data->regulator);
 		if (ret == 0)
-			data->enabled = 0;
+			data->enabled = false;
 		else
 			dev_err(dev, "regulator_disable() failed: %d\n",
 				ret);
@@ -89,7 +89,7 @@ static void update_current_limit_constraints(struct device *dev,
 		dev_dbg(dev, "Enabling regulator\n");
 		ret = regulator_enable(data->regulator);
 		if (ret == 0)
-			data->enabled = 1;
+			data->enabled = true;
 		else
 			dev_err(dev, "regulator_enable() failed: %d\n",
 				ret);
@@ -99,7 +99,7 @@ static void update_current_limit_constraints(struct device *dev,
 		dev_dbg(dev, "Disabling regulator\n");
 		ret = regulator_disable(data->regulator);
 		if (ret == 0)
-			data->enabled = 0;
+			data->enabled = false;
 		else
 			dev_err(dev, "regulator_disable() failed: %d\n",
 				ret);
@@ -270,24 +270,28 @@ static DEVICE_ATTR(min_microamps, 0666, show_min_uA, set_min_uA);
 static DEVICE_ATTR(max_microamps, 0666, show_max_uA, set_max_uA);
 static DEVICE_ATTR(mode, 0666, show_mode, set_mode);
 
-static struct device_attribute *attributes[] = {
-	&dev_attr_min_microvolts,
-	&dev_attr_max_microvolts,
-	&dev_attr_min_microamps,
-	&dev_attr_max_microamps,
-	&dev_attr_mode,
+static struct attribute *regulator_virtual_attributes[] = {
+	&dev_attr_min_microvolts.attr,
+	&dev_attr_max_microvolts.attr,
+	&dev_attr_min_microamps.attr,
+	&dev_attr_max_microamps.attr,
+	&dev_attr_mode.attr,
+	NULL
 };
 
-static int regulator_virtual_consumer_probe(struct platform_device *pdev)
+static const struct attribute_group regulator_virtual_attr_group = {
+	.attrs	= regulator_virtual_attributes,
+};
+
+static int __devinit regulator_virtual_probe(struct platform_device *pdev)
 {
 	char *reg_id = pdev->dev.platform_data;
 	struct virtual_consumer_data *drvdata;
-	int ret, i;
+	int ret;
 
 	drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL);
-	if (drvdata == NULL) {
+	if (drvdata == NULL)
 		return -ENOMEM;
-	}
 
 	mutex_init(&drvdata->lock);
 
@@ -299,13 +303,12 @@ static int regulator_virtual_consumer_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(attributes); i++) {
-		ret = device_create_file(&pdev->dev, attributes[i]);
-		if (ret != 0) {
-			dev_err(&pdev->dev, "Failed to create attr %d: %d\n",
-				i, ret);
-			goto err_regulator;
-		}
+	ret = sysfs_create_group(&pdev->dev.kobj,
+				 &regulator_virtual_attr_group);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"Failed to create attribute group: %d\n", ret);
+		goto err_regulator;
 	}
 
 	drvdata->mode = regulator_get_mode(drvdata->regulator);
@@ -317,37 +320,36 @@ static int regulator_virtual_consumer_probe(struct platform_device *pdev)
 err_regulator:
 	regulator_put(drvdata->regulator);
 err:
-	for (i = 0; i < ARRAY_SIZE(attributes); i++)
-		device_remove_file(&pdev->dev, attributes[i]);
 	kfree(drvdata);
 	return ret;
 }
 
-static int regulator_virtual_consumer_remove(struct platform_device *pdev)
+static int __devexit regulator_virtual_remove(struct platform_device *pdev)
 {
 	struct virtual_consumer_data *drvdata = platform_get_drvdata(pdev);
-	int i;
 
-	for (i = 0; i < ARRAY_SIZE(attributes); i++)
-		device_remove_file(&pdev->dev, attributes[i]);
+	sysfs_remove_group(&pdev->dev.kobj, &regulator_virtual_attr_group);
+
 	if (drvdata->enabled)
 		regulator_disable(drvdata->regulator);
 	regulator_put(drvdata->regulator);
 
 	kfree(drvdata);
 
+	platform_set_drvdata(pdev, NULL);
+
 	return 0;
 }
 
 static struct platform_driver regulator_virtual_consumer_driver = {
-	.probe		= regulator_virtual_consumer_probe,
-	.remove		= regulator_virtual_consumer_remove,
+	.probe		= regulator_virtual_probe,
+	.remove		= __devexit_p(regulator_virtual_remove),
 	.driver		= {
 		.name		= "reg-virt-consumer",
+		.owner		= THIS_MODULE,
 	},
 };
 
-
 static int __init regulator_virtual_consumer_init(void)
 {
 	return platform_driver_register(&regulator_virtual_consumer_driver);

drivers/regulator/wm831x-dcdc.c

@@ -600,6 +600,8 @@ static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 	struct wm831x *wm831x = dcdc->wm831x;
 
+	platform_set_drvdata(pdev, NULL);
+
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
 	regulator_unregister(dcdc->regulator);
@@ -615,6 +617,7 @@ static struct platform_driver wm831x_buckv_driver = {
 	.remove = __devexit_p(wm831x_buckv_remove),
 	.driver		= {
 		.name	= "wm831x-buckv",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -769,6 +772,8 @@ static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 	struct wm831x *wm831x = dcdc->wm831x;
 
+	platform_set_drvdata(pdev, NULL);
+
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
 	regulator_unregister(dcdc->regulator);
 	kfree(dcdc);
@@ -781,6 +786,7 @@ static struct platform_driver wm831x_buckp_driver = {
 	.remove = __devexit_p(wm831x_buckp_remove),
 	.driver		= {
 		.name	= "wm831x-buckp",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -895,6 +901,8 @@ static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 	struct wm831x *wm831x = dcdc->wm831x;
 
+	platform_set_drvdata(pdev, NULL);
+
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
 	regulator_unregister(dcdc->regulator);
 	kfree(dcdc);
@@ -907,6 +915,7 @@ static struct platform_driver wm831x_boostp_driver = {
 	.remove = __devexit_p(wm831x_boostp_remove),
 	.driver		= {
 		.name	= "wm831x-boostp",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -979,6 +988,8 @@ static __devexit int wm831x_epe_remove(struct platform_device *pdev)
 {
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 
+	platform_set_drvdata(pdev, NULL);
+
 	regulator_unregister(dcdc->regulator);
 	kfree(dcdc);
 
@@ -990,6 +1001,7 @@ static struct platform_driver wm831x_epe_driver = {
 	.remove = __devexit_p(wm831x_epe_remove),
 	.driver		= {
 		.name	= "wm831x-epe",
+		.owner	= THIS_MODULE,
 	},
 };
 

drivers/regulator/wm831x-isink.c

@@ -222,6 +222,8 @@ static __devexit int wm831x_isink_remove(struct platform_device *pdev)
 	struct wm831x_isink *isink = platform_get_drvdata(pdev);
 	struct wm831x *wm831x = isink->wm831x;
 
+	platform_set_drvdata(pdev, NULL);
+
 	wm831x_free_irq(wm831x, platform_get_irq(pdev, 0), isink);
 
 	regulator_unregister(isink->regulator);
@@ -235,6 +237,7 @@ static struct platform_driver wm831x_isink_driver = {
 	.remove = __devexit_p(wm831x_isink_remove),
 	.driver		= {
 		.name	= "wm831x-isink",
+		.owner	= THIS_MODULE,
 	},
 };
 

drivers/regulator/wm831x-ldo.c

@@ -371,6 +371,8 @@ static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev)
 	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
 	struct wm831x *wm831x = ldo->wm831x;
 
+	platform_set_drvdata(pdev, NULL);
+
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
 	regulator_unregister(ldo->regulator);
 	kfree(ldo);
@@ -383,6 +385,7 @@ static struct platform_driver wm831x_gp_ldo_driver = {
 	.remove = __devexit_p(wm831x_gp_ldo_remove),
 	.driver		= {
 		.name	= "wm831x-ldo",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -640,6 +643,7 @@ static struct platform_driver wm831x_aldo_driver = {
 	.remove = __devexit_p(wm831x_aldo_remove),
 	.driver		= {
 		.name	= "wm831x-aldo",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -811,6 +815,7 @@ static struct platform_driver wm831x_alive_ldo_driver = {
 	.remove = __devexit_p(wm831x_alive_ldo_remove),
 	.driver		= {
 		.name	= "wm831x-alive-ldo",
+		.owner	= THIS_MODULE,
 	},
 };
 

drivers/regulator/wm8350-regulator.c

@@ -290,6 +290,51 @@ static int wm8350_isink_is_enabled(struct regulator_dev *rdev)
 	return -EINVAL;
 }
 
+static int wm8350_isink_enable_time(struct regulator_dev *rdev)
+{
+	struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
+	int isink = rdev_get_id(rdev);
+	int reg;
+
+	switch (isink) {
+	case WM8350_ISINK_A:
+		reg = wm8350_reg_read(wm8350, WM8350_CSA_FLASH_CONTROL);
+		break;
+	case WM8350_ISINK_B:
+		reg = wm8350_reg_read(wm8350, WM8350_CSB_FLASH_CONTROL);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (reg & WM8350_CS1_FLASH_MODE) {
+		switch (reg & WM8350_CS1_ON_RAMP_MASK) {
+		case 0:
+			return 0;
+		case 1:
+			return 1950;
+		case 2:
+			return 3910;
+		case 3:
+			return 7800;
+		}
+	} else {
+		switch (reg & WM8350_CS1_ON_RAMP_MASK) {
+		case 0:
+			return 0;
+		case 1:
+			return 250000;
+		case 2:
+			return 500000;
+		case 3:
+			return 1000000;
+		}
+	}
+
+	return -EINVAL;
+}
+
+
 int wm8350_isink_set_flash(struct wm8350 *wm8350, int isink, u16 mode,
 			   u16 trigger, u16 duration, u16 on_ramp, u16 off_ramp,
 			   u16 drive)
@@ -1221,6 +1266,7 @@ static struct regulator_ops wm8350_isink_ops = {
 	.enable = wm8350_isink_enable,
 	.disable = wm8350_isink_disable,
 	.is_enabled = wm8350_isink_is_enabled,
+	.enable_time = wm8350_isink_enable_time,
 };
 
 static struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = {

drivers/regulator/wm8400-regulator.c

@@ -317,14 +317,17 @@ static struct regulator_desc regulators[] = {
 
 static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
 {
+	struct wm8400 *wm8400 = container_of(pdev, struct wm8400, regulators[pdev->id]);
 	struct regulator_dev *rdev;
 
 	rdev = regulator_register(&regulators[pdev->id], &pdev->dev,
-		pdev->dev.platform_data, dev_get_drvdata(&pdev->dev));
+				  pdev->dev.platform_data, wm8400);
 
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);
 
+	platform_set_drvdata(pdev, rdev);
+
 	return 0;
 }
 
@@ -332,6 +335,7 @@ static int __devexit wm8400_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 
+	platform_set_drvdata(pdev, NULL);
 	regulator_unregister(rdev);
 
 	return 0;
@@ -370,7 +374,6 @@ int wm8400_register_regulator(struct device *dev, int reg,
 	wm8400->regulators[reg].id = reg;
 	wm8400->regulators[reg].dev.parent = dev;
 	wm8400->regulators[reg].dev.platform_data = initdata;
-	dev_set_drvdata(&wm8400->regulators[reg].dev, wm8400);
 
 	return platform_device_register(&wm8400->regulators[reg]);
 }

drivers/regulator/wm8994-regulator.c

+/*
+ * wm8994-regulator.c  --  Regulator driver for the WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/wm8994/core.h>
+#include <linux/mfd/wm8994/registers.h>
+#include <linux/mfd/wm8994/pdata.h>
+
+struct wm8994_ldo {
+	int enable;
+	bool is_enabled;
+	struct regulator_dev *regulator;
+	struct wm8994 *wm8994;
+};
+
+#define WM8994_LDO1_MAX_SELECTOR 0x7
+#define WM8994_LDO2_MAX_SELECTOR 0x3
+
+static int wm8994_ldo_enable(struct regulator_dev *rdev)
+{
+	struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
+
+	/* If we have no soft control assume that the LDO is always enabled. */
+	if (!ldo->enable)
+		return 0;
+
+	gpio_set_value(ldo->enable, 1);
+	ldo->is_enabled = true;
+
+	return 0;
+}
+
+static int wm8994_ldo_disable(struct regulator_dev *rdev)
+{
+	struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
+
+	/* If we have no soft control assume that the LDO is always enabled. */
+	if (!ldo->enable)
+		return -EINVAL;
+
+	gpio_set_value(ldo->enable, 0);
+	ldo->is_enabled = false;
+
+	return 0;
+}
+
+static int wm8994_ldo_is_enabled(struct regulator_dev *rdev)
+{
+	struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
+
+	return ldo->is_enabled;
+}
+
+static int wm8994_ldo_enable_time(struct regulator_dev *rdev)
+{
+	/* 3ms is fairly conservative but this shouldn't be too performance
+	 * critical; can be tweaked per-system if required. */
+	return 3000;
+}
+
+static int wm8994_ldo1_list_voltage(struct regulator_dev *rdev,
+				    unsigned int selector)
+{
+	if (selector > WM8994_LDO1_MAX_SELECTOR)
+		return -EINVAL;
+
+	return (selector * 100000) + 2400000;
+}
+
+static int wm8994_ldo1_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
+	int val;
+
+	val = wm8994_reg_read(ldo->wm8994, WM8994_LDO_1);
+	if (val < 0)
+		return val;
+
+	val = (val & WM8994_LDO1_VSEL_MASK) >> WM8994_LDO1_VSEL_SHIFT;
+
+	return wm8994_ldo1_list_voltage(rdev, val);
+}
+
+static int wm8994_ldo1_set_voltage(struct regulator_dev *rdev,
+				   int min_uV, int max_uV)
+{
+	struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
+	int selector, v;
+
+	selector = (min_uV - 2400000) / 100000;
+	v = wm8994_ldo1_list_voltage(rdev, selector);
+	if (v < 0 || v > max_uV)
+		return -EINVAL;
+
+	selector <<= WM8994_LDO1_VSEL_SHIFT;
+
+	return wm8994_set_bits(ldo->wm8994, WM8994_LDO_1,
+			       WM8994_LDO1_VSEL_MASK, selector);
+}
+
+static struct regulator_ops wm8994_ldo1_ops = {
+	.enable = wm8994_ldo_enable,
+	.disable = wm8994_ldo_disable,
+	.is_enabled = wm8994_ldo_is_enabled,
+	.enable_time = wm8994_ldo_enable_time,
+
+	.list_voltage = wm8994_ldo1_list_voltage,
+	.get_voltage = wm8994_ldo1_get_voltage,
+	.set_voltage = wm8994_ldo1_set_voltage,
+};
+
+static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev,
+				    unsigned int selector)
+{
+	if (selector > WM8994_LDO2_MAX_SELECTOR)
+		return -EINVAL;
+
+	return (selector * 100000) + 900000;
+}
+
+static int wm8994_ldo2_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
+	int val;
+
+	val = wm8994_reg_read(ldo->wm8994, WM8994_LDO_2);
+	if (val < 0)
+		return val;
+
+	val = (val & WM8994_LDO2_VSEL_MASK) >> WM8994_LDO2_VSEL_SHIFT;
+
+	return wm8994_ldo2_list_voltage(rdev, val);
+}
+
+static int wm8994_ldo2_set_voltage(struct regulator_dev *rdev,
+				   int min_uV, int max_uV)
+{
+	struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
+	int selector, v;
+
+	selector = (min_uV - 900000) / 100000;
+	v = wm8994_ldo2_list_voltage(rdev, selector);
+	if (v < 0 || v > max_uV)
+		return -EINVAL;
+
+	selector <<= WM8994_LDO2_VSEL_SHIFT;
+
+	return wm8994_set_bits(ldo->wm8994, WM8994_LDO_2,
+			       WM8994_LDO2_VSEL_MASK, selector);
+}
+
+static struct regulator_ops wm8994_ldo2_ops = {
+	.enable = wm8994_ldo_enable,
+	.disable = wm8994_ldo_disable,
+	.is_enabled = wm8994_ldo_is_enabled,
+	.enable_time = wm8994_ldo_enable_time,
+
+	.list_voltage = wm8994_ldo2_list_voltage,
+	.get_voltage = wm8994_ldo2_get_voltage,
+	.set_voltage = wm8994_ldo2_set_voltage,
+};
+
+static struct regulator_desc wm8994_ldo_desc[] = {
+	{
+		.name = "LDO1",
+		.id = 1,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = WM8994_LDO1_MAX_SELECTOR + 1,
+		.ops = &wm8994_ldo1_ops,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO2",
+		.id = 2,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = WM8994_LDO2_MAX_SELECTOR + 1,
+		.ops = &wm8994_ldo2_ops,
+		.owner = THIS_MODULE,
+	},
+};
+
+static __devinit int wm8994_ldo_probe(struct platform_device *pdev)
+{
+	struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent);
+	struct wm8994_pdata *pdata = wm8994->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+	struct wm8994_ldo *ldo;
+	int ret;
+
+	dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+	if (!pdata)
+		return -ENODEV;
+
+	ldo = kzalloc(sizeof(struct wm8994_ldo), GFP_KERNEL);
+	if (ldo == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	ldo->wm8994 = wm8994;
+
+	ldo->is_enabled = true;
+
+	if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) {
+		ldo->enable = pdata->ldo[id].enable;
+
+		ret = gpio_request(ldo->enable, "WM8994 LDO enable");
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n",
+				ret);
+			goto err;
+		}
+
+		ret = gpio_direction_output(ldo->enable, ldo->is_enabled);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Failed to set GPIO up: %d\n",
+				ret);
+			goto err_gpio;
+		}
+	}
+
+	ldo->regulator = regulator_register(&wm8994_ldo_desc[id], &pdev->dev,
+					     pdata->ldo[id].init_data, ldo);
+	if (IS_ERR(ldo->regulator)) {
+		ret = PTR_ERR(ldo->regulator);
+		dev_err(wm8994->dev, "Failed to register LDO%d: %d\n",
+			id + 1, ret);
+		goto err_gpio;
+	}
+
+	platform_set_drvdata(pdev, ldo);
+
+	return 0;
+
+err_gpio:
+	if (gpio_is_valid(ldo->enable))
+		gpio_free(ldo->enable);
+err:
+	kfree(ldo);
+	return ret;
+}
+
+static __devexit int wm8994_ldo_remove(struct platform_device *pdev)
+{
+	struct wm8994_ldo *ldo = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	regulator_unregister(ldo->regulator);
+	if (gpio_is_valid(ldo->enable))
+		gpio_free(ldo->enable);
+	kfree(ldo);
+
+	return 0;
+}
+
+static struct platform_driver wm8994_ldo_driver = {
+	.probe = wm8994_ldo_probe,
+	.remove = __devexit_p(wm8994_ldo_remove),
+	.driver		= {
+		.name	= "wm8994-ldo",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init wm8994_ldo_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&wm8994_ldo_driver);
+	if (ret != 0)
+		pr_err("Failed to register Wm8994 GP LDO driver: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(wm8994_ldo_init);
+
+static void __exit wm8994_ldo_exit(void)
+{
+	platform_driver_unregister(&wm8994_ldo_driver);
+}
+module_exit(wm8994_ldo_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM8994 LDO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8994-ldo");

include/linux/mfd/mc13783.h

@@ -108,6 +108,8 @@ int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
 #define	MC13783_REGU_V2		28
 #define	MC13783_REGU_V3		29
 #define	MC13783_REGU_V4		30
+#define	MC13783_REGU_PWGT1SPI	31
+#define	MC13783_REGU_PWGT2SPI	32
 
 #define MC13783_IRQ_ADCDONE	0
 #define MC13783_IRQ_ADCBISDONE	1

include/linux/regulator/consumer.h

@@ -89,8 +89,9 @@
  * REGULATION_OUT Regulator output is out of regulation.
  * FAIL           Regulator output has failed.
  * OVER_TEMP      Regulator over temp.
- * FORCE_DISABLE  Regulator shut down by software.
+ * FORCE_DISABLE  Regulator forcibly shut down by software.
  * VOLTAGE_CHANGE Regulator voltage changed.
+ * DISABLE        Regulator was disabled.
  *
  * NOTE: These events can be OR'ed together when passed into handler.
  */
@@ -102,6 +103,7 @@
 #define REGULATOR_EVENT_OVER_TEMP		0x10
 #define REGULATOR_EVENT_FORCE_DISABLE		0x20
 #define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
+#define REGULATOR_EVENT_DISABLE 		0x80
 
 struct regulator;
 

include/linux/regulator/driver.h

@@ -58,6 +58,9 @@ enum regulator_status {
  * @get_optimum_mode: Get the most efficient operating mode for the regulator
  *                    when running with the specified parameters.
  *
+ * @enable_time: Time taken for the regulator voltage output voltage to
+ *               stabalise after being enabled, in microseconds.
+ *
  * @set_suspend_voltage: Set the voltage for the regulator when the system
  *                       is suspended.
  * @set_suspend_enable: Mark the regulator as enabled when the system is
@@ -93,6 +96,9 @@ struct regulator_ops {
 	int (*set_mode) (struct regulator_dev *, unsigned int mode);
 	unsigned int (*get_mode) (struct regulator_dev *);
 
+	/* Time taken to enable the regulator */
+	int (*enable_time) (struct regulator_dev *);
+
 	/* report regulator status ... most other accessors report
 	 * control inputs, this reports results of combining inputs
 	 * from Linux (and other sources) with the actual load.

include/linux/regulator/fixed.h

@@ -25,6 +25,7 @@ struct regulator_init_data;
  * @microvolts:		Output voltage of regulator
  * @gpio:		GPIO to use for enable control
  * 			set to -EINVAL if not used
+ * @startup_delay:	Start-up time in microseconds
  * @enable_high:	Polarity of enable GPIO
  *			1 = Active high, 0 = Active low
  * @enabled_at_boot:	Whether regulator has been enabled at
@@ -41,6 +42,7 @@ struct fixed_voltage_config {
 	const char *supply_name;
 	int microvolts;
 	int gpio;
+	unsigned startup_delay;
 	unsigned enable_high:1;
 	unsigned enabled_at_boot:1;
 	struct regulator_init_data *init_data;

include/linux/regulator/max8649.h

+/*
+ * Interface of Maxim max8649
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *      Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8649_H
+#define	__LINUX_REGULATOR_MAX8649_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+	MAX8649_EXTCLK_26MHZ = 0,
+	MAX8649_EXTCLK_13MHZ,
+	MAX8649_EXTCLK_19MHZ,	/* 19.2MHz */
+};
+
+enum {
+	MAX8649_RAMP_32MV = 0,
+	MAX8649_RAMP_16MV,
+	MAX8649_RAMP_8MV,
+	MAX8649_RAMP_4MV,
+	MAX8649_RAMP_2MV,
+	MAX8649_RAMP_1MV,
+	MAX8649_RAMP_0_5MV,
+	MAX8649_RAMP_0_25MV,
+};
+
+struct max8649_platform_data {
+	struct regulator_init_data *regulator;
+
+	unsigned	mode:2;		/* bit[1:0] = VID1,VID0 */
+	unsigned	extclk_freq:2;
+	unsigned	extclk:1;
+	unsigned	ramp_timing:3;
+	unsigned	ramp_down:1;
+};
+
+#endif	/* __LINUX_REGULATOR_MAX8649_H */