Merge bk://linux-acpi.bkbits.net/linux-acpi-release-2.6.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

CREDITS

@@ -1308,11 +1308,10 @@ S: USA
 
 N: Benjamin Herrenschmidt
 E: benh@kernel.crashing.org
-E: benh@mipsys.com
-D: Various parts of PPC & PowerMac
-S: 122, boulevard Baille
-S: 13005 Marseille
-S: France
+D: Various parts of PPC/PPC64 & PowerMac
+S: 312/107 Canberra Avenue
+S: Griffith, ACT 2603 
+S: Australia
 
 N: Sebastian Hetze
 E: she@lunetix.de

arch/arm/common/sa1111.c

@@ -589,8 +589,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 			ret = dmabounce_register_dev(&dev->dev, 1024, 4096);
 			if (ret) {
 				printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id);
-				kfree(dev);
-				device_unregister(dev);
+				device_unregister(&dev->dev);
 			}
 		}
 	}
@@ -779,8 +778,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
 	/*
 	 * Check to see if either the start or end are illegal.
 	 */
-	return ((addr & ~(*dev->dma_mask))) ||
-		((addr + size - 1) & ~(*dev->dma_mask));
+	return ((addr & ~dma_mask)) || ((addr + size - 1) & ~dma_mask);
 }
 
 struct sa1111_save_data {

arch/arm/tools/mach-types

@@ -6,7 +6,7 @@
 # To add an entry into this database, please see Documentation/arm/README,
 # or contact rmk@arm.linux.org.uk
 #
-# Last update: Thu Apr 15 10:14:37 2004
+# Last update: Thu Apr 29 19:06:33 2004
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -242,7 +242,7 @@ killbear		SA1100_KILLBEAR		KILLBEAR		230
 yoho			ARCH_YOHO		YOHO			231
 jasper			ARCH_JASPER		JASPER			232
 dsc25			ARCH_DSC25		DSC25			233
-innovator		ARCH_INNOVATOR		INNOVATOR		234
+omap_innovator		MACH_OMAP_INNOVATOR	OMAP_INNOVATOR		234
 ramses			ARCH_RAMSES		RAMSES			235
 s28x			ARCH_S28X		S28X			236
 mport3			ARCH_MPORT3		MPORT3			237
@@ -390,7 +390,7 @@ espd_4510b		ARCH_ESPD_4510B		ESPD_4510B		378
 mp1x			ARCH_MP1X		MP1X			379
 at91rm9200tb		ARCH_AT91RM9200TB	AT91RM9200TB		380
 adsvgx			ARCH_ADSVGX		ADSVGX			381
-omap_h2			ARCH_OMAP_H2		OMAP_H2			382
+omap_h2			MACH_OMAP_H2		OMAP_H2			382
 pelee			ARCH_PELEE		PELEE			383
 e740			MACH_E740		E740			384
 iq80331			ARCH_IQ80331		IQ80331			385
@@ -523,3 +523,13 @@ montajade		MACH_MONTAJADE		MONTAJADE		512
 sg560			MACH_SG560		SG560			513
 dp1000			MACH_DP1000		DP1000			514
 omap_osk		MACH_OMAP_OSK		OMAP_OSK		515
+rg100v3			MACH_RG100V3		RG100V3			516
+mx2ads			MACH_MX2ADS		MX2ADS			517
+pxa_kilo		MACH_PXA_KILO		PXA_KILO		518
+ixp4xx_eagle		MACH_IXP4XX_EAGLE	IXP4XX_EAGLE		519
+tosa			MACH_TOSA		TOSA			520
+mb2520f			MACH_MB2520F		MB2520F			521
+emc1000			MACH_EMC1000		EMC1000			522
+tidsc25			MACH_TIDSC25		TIDSC25			523
+akcpmxl			MACH_AKCPMXL		AKCPMXL			524
+av3xx			MACH_AV3XX		AV3XX			525

arch/i386/kernel/nmi.c

@@ -36,6 +36,20 @@ static unsigned int nmi_hz = HZ;
 unsigned int nmi_perfctr_msr;	/* the MSR to reset in NMI handler */
 extern void show_registers(struct pt_regs *regs);
 
+/*
+ * lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
+ * - it may be reserved by some other driver, or not
+ * - when not reserved by some other driver, it may be used for
+ *   the NMI watchdog, or not
+ *
+ * This is maintained separately from nmi_active because the NMI
+ * watchdog may also be driven from the I/O APIC timer.
+ */
+static spinlock_t lapic_nmi_owner_lock = SPIN_LOCK_UNLOCKED;
+static unsigned int lapic_nmi_owner;
+#define LAPIC_NMI_WATCHDOG	(1<<0)
+#define LAPIC_NMI_RESERVED	(1<<1)
+
 /* nmi_active:
  * +1: the lapic NMI watchdog is active, but can be disabled
  *  0: the lapic NMI watchdog has not been set up, and cannot
@@ -102,6 +116,7 @@ int __init check_nmi_watchdog (void)
 		if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
 			printk("CPU#%d: NMI appears to be stuck!\n", cpu);
 			nmi_active = 0;
+			lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
 			return -1;
 		}
 	}
@@ -151,7 +166,7 @@ static int __init setup_nmi_watchdog(char *str)
 
 __setup("nmi_watchdog=", setup_nmi_watchdog);
 
-void disable_lapic_nmi_watchdog(void)
+static void disable_lapic_nmi_watchdog(void)
 {
 	if (nmi_active <= 0)
 		return;
@@ -182,7 +197,7 @@ void disable_lapic_nmi_watchdog(void)
 	nmi_watchdog = 0;
 }
 
-void enable_lapic_nmi_watchdog(void)
+static void enable_lapic_nmi_watchdog(void)
 {
 	if (nmi_active < 0) {
 		nmi_watchdog = NMI_LOCAL_APIC;
@@ -190,6 +205,33 @@ void enable_lapic_nmi_watchdog(void)
 	}
 }
 
+int reserve_lapic_nmi(void)
+{
+	unsigned int old_owner;
+
+	spin_lock(&lapic_nmi_owner_lock);
+	old_owner = lapic_nmi_owner;
+	lapic_nmi_owner |= LAPIC_NMI_RESERVED;
+	spin_unlock(&lapic_nmi_owner_lock);
+	if (old_owner & LAPIC_NMI_RESERVED)
+		return -EBUSY;
+	if (old_owner & LAPIC_NMI_WATCHDOG)
+		disable_lapic_nmi_watchdog();
+	return 0;
+}
+
+void release_lapic_nmi(void)
+{
+	unsigned int new_owner;
+
+	spin_lock(&lapic_nmi_owner_lock);
+	new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED;
+	lapic_nmi_owner = new_owner;
+	spin_unlock(&lapic_nmi_owner_lock);
+	if (new_owner & LAPIC_NMI_WATCHDOG)
+		enable_lapic_nmi_watchdog();
+}
+
 void disable_timer_nmi_watchdog(void)
 {
 	if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0))
@@ -243,7 +285,7 @@ static int __init init_lapic_nmi_sysfs(void)
 {
 	int error;
 
-	if (nmi_active == 0)
+	if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC)
 		return 0;
 
 	error = sysdev_class_register(&nmi_sysclass);
@@ -373,6 +415,7 @@ void setup_apic_nmi_watchdog (void)
 	default:
 		return;
 	}
+	lapic_nmi_owner = LAPIC_NMI_WATCHDOG;
 	nmi_active = 1;
 }
 
@@ -470,7 +513,7 @@ void nmi_watchdog_tick (struct pt_regs * regs)
 
 EXPORT_SYMBOL(nmi_active);
 EXPORT_SYMBOL(nmi_watchdog);
-EXPORT_SYMBOL(disable_lapic_nmi_watchdog);
-EXPORT_SYMBOL(enable_lapic_nmi_watchdog);
+EXPORT_SYMBOL(reserve_lapic_nmi);
+EXPORT_SYMBOL(release_lapic_nmi);
 EXPORT_SYMBOL(disable_timer_nmi_watchdog);
 EXPORT_SYMBOL(enable_timer_nmi_watchdog);

arch/i386/oprofile/nmi_int.c

@@ -183,7 +183,10 @@ static int nmi_setup(void)
 	 * without actually triggering any NMIs as this will
 	 * break the core code horrifically.
 	 */
-	disable_lapic_nmi_watchdog();
+	if (reserve_lapic_nmi() < 0) {
+		free_msrs();
+		return -EBUSY;
+	}
 	/* We need to serialize save and setup for HT because the subset
 	 * of msrs are distinct for save and setup operations
 	 */
@@ -241,7 +244,7 @@ static void nmi_shutdown(void)
 	nmi_enabled = 0;
 	on_each_cpu(nmi_cpu_shutdown, NULL, 0, 1);
 	unset_nmi_callback();
-	enable_lapic_nmi_watchdog();
+	release_lapic_nmi();
 	free_msrs();
 }
 

arch/i386/pci/fixup.c

@@ -187,6 +187,42 @@ static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev)
 		dev->transparent = 1;
 }
 
+/*
+ * Fixup for C1 Halt Disconnect problem on nForce2 systems.
+ *
+ * From information provided by "Allen Martin" <AMartin@nvidia.com>:
+ *
+ * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle
+ * sequence.  Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns.
+ * This allows the state-machine and timer to return to a proper state within
+ * 80 ns of the CONNECT and probe appearing together.  Since the CPU will not
+ * issue another HALT within 80 ns of the initial HALT, the failure condition
+ * is avoided.
+ */
+static void __init pci_fixup_nforce2(struct pci_dev *dev)
+{
+	u32 val, fixed_val;
+	u8 rev;
+
+	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+
+	/*
+	 * Chip  Old value   New value
+	 * C17   0x1F0FFF01  0x1F01FF01
+	 * C18D  0x9F0FFF01  0x9F01FF01
+	 *
+	 * Northbridge chip version may be determined by
+	 * reading the PCI revision ID (0xC1 or greater is C18D).
+	 */
+	fixed_val = rev < 0xC1 ? 0x1F01FF01 : 0x9F01FF01;
+
+	pci_read_config_dword(dev, 0x6c, &val);
+	if (val != fixed_val) {
+		printk(KERN_WARNING "PCI: nForce2 C1 Halt Disconnect fixup\n");
+		pci_write_config_dword(dev, 0x6c, fixed_val);
+	}
+}
+
 struct pci_fixup pcibios_fixups[] = {
 	{
 		.pass		= PCI_FIXUP_HEADER,
@@ -290,5 +326,11 @@ struct pci_fixup pcibios_fixups[] = {
 		.device		= PCI_ANY_ID,
 		.hook		= pci_fixup_transparent_bridge
 	},
+	{
+		.pass		= PCI_FIXUP_HEADER,
+		.vendor		= PCI_VENDOR_ID_NVIDIA,
+		.device		= PCI_DEVICE_ID_NVIDIA_NFORCE2,
+		.hook		= pci_fixup_nforce2
+	},
 	{ .pass = 0 }
 };

arch/ia64/kernel/efi.c

@@ -733,3 +733,47 @@ valid_phys_addr_range (unsigned long phys_addr, unsigned long *size)
 	return 0;
 }
 
+int __init
+efi_uart_console_only(void)
+{
+	efi_status_t status;
+	char *s, name[] = "ConOut";
+	efi_guid_t guid = EFI_GLOBAL_VARIABLE_GUID;
+	efi_char16_t *utf16, name_utf16[32];
+	unsigned char data[1024];
+	unsigned long size = sizeof(data);
+	struct efi_generic_dev_path *hdr, *end_addr;
+	int uart = 0;
+
+	/* Convert to UTF-16 */
+	utf16 = name_utf16;
+	s = name;
+	while (*s)
+		*utf16++ = *s++ & 0x7f;
+	*utf16 = 0;
+
+	status = efi.get_variable(name_utf16, &guid, NULL, &size, data);
+	if (status != EFI_SUCCESS) {
+		printk(KERN_ERR "No EFI %s variable?\n", name);
+		return 0;
+	}
+
+	hdr = (struct efi_generic_dev_path *) data;
+	end_addr = (struct efi_generic_dev_path *) ((u8 *) data + size);
+	while (hdr < end_addr) {
+		if (hdr->type == EFI_DEV_MSG &&
+		    hdr->sub_type == EFI_DEV_MSG_UART)
+			uart = 1;
+		else if (hdr->type == EFI_DEV_END_PATH ||
+			  hdr->type == EFI_DEV_END_PATH2) {
+			if (!uart)
+				return 0;
+			if (hdr->sub_type == EFI_DEV_END_ENTIRE)
+				return 1;
+			uart = 0;
+		}
+		hdr = (struct efi_generic_dev_path *) ((u8 *) hdr + hdr->length);
+	}
+	printk(KERN_ERR "Malformed %s value\n", name);
+	return 0;
+}

arch/ppc/boot/openfirmware/Makefile

@@ -89,13 +89,14 @@ $(obj)/coffcrt0.o $(obj)/crt0.o: $(common)/crt0.S FORCE
 	$(call if_changed_dep,as_o_S)
 
 quiet_cmd_gencoffb = COFF    $@
-      cmd_gencoffb = $(LD) -o $@ $(COFF_LD_ARGS) $(filter-out FORCE,$^) && \
+      cmd_gencoffb = $(LD) -o $@ $(COFF_LD_ARGS) $(COFFOBJS) $< $(LIBS) && \
                      $(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec)
 targets += coffboot
-$(obj)/coffboot: $(COFFOBJS) $(obj)/image.o $(LIBS) FORCE
+$(obj)/coffboot: $(obj)/image.o $(COFFOBJS) $(LIBS) $(boot)/ld.script FORCE
 	$(call if_changed,gencoffb)
 targets += coffboot.initrd
-$(obj)/coffboot.initrd: $(COFFOBJS) $(obj)/image.initrd.o $(LIBS) FORCE
+$(obj)/coffboot.initrd: $(obj)/image.initrd.o $(COFFOBJS) $(LIBS) \
+			$(boot)/ld.script FORCE
 	$(call if_changed,gencoffb)
 
 
@@ -104,10 +105,10 @@ quiet_cmd_gen-coff = COFF    $@
 			$(HACKCOFF) $@ && \
 			ln -sf $(notdir $@) $(images)/zImage$(initrd).pmac
 
-$(images)/vmlinux.coff: $(obj)/coffboot $(boot)/ld.script
+$(images)/vmlinux.coff: $(obj)/coffboot
 	$(call cmd,gen-coff)
 
-$(images)/vmlinux.initrd.coff: $(obj)/coffboot.initrd $(boot)/ld.script
+$(images)/vmlinux.initrd.coff: $(obj)/coffboot.initrd
 	$(call cmd,gen-coff)
 
 quiet_cmd_gen-elf-pmac = ELF     $@
@@ -116,19 +117,21 @@ quiet_cmd_gen-elf-pmac = ELF     $@
 			$(OBJCOPY) $@ $@ --add-section=.note=$(obj)/note \
 					 -R .comment $(del-ramdisk-sec)
 
-$(images)/vmlinux.elf-pmac: $(obj)/image.o $(NEWWORLDOBJS) $(LIBS) $(obj)/note $(boot)/ld.script
+$(images)/vmlinux.elf-pmac: $(obj)/image.o $(NEWWORLDOBJS) $(LIBS) \
+			$(obj)/note $(boot)/ld.script
 	$(call cmd,gen-elf-pmac)
 $(images)/vmlinux.initrd.elf-pmac: $(obj)/image.initrd.o $(NEWWORLDOBJS) \
 				   $(LIBS) $(obj)/note $(boot)/ld.script
 	$(call cmd,gen-elf-pmac)
 
 quiet_cmd_gen-chrp = CHRP    $@
-      cmd_gen-chrp = $(LD) $(CHRP_LD_ARGS) -o $@ $^ && \
+      cmd_gen-chrp = $(LD) $(CHRP_LD_ARGS) -o $@ $(CHRPOBJS) $< $(LIBS) && \
 			$(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec)
 
-$(images)/zImage.chrp: $(CHRPOBJS) $(obj)/image.o $(LIBS) $(boot)/ld.script
+$(images)/zImage.chrp: $(obj)/image.o $(CHRPOBJS) $(LIBS) $(boot)/ld.script
 	$(call cmd,gen-chrp)
-$(images)/zImage.initrd.chrp: $(CHRPOBJS) $(obj)/image.initrd.o $(LIBS) $(boot)/ld.script
+$(images)/zImage.initrd.chrp: $(obj)/image.initrd.o $(CHRPOBJS) $(LIBS) \
+			$(boot)/ld.script
 	$(call cmd,gen-chrp)
 
 quiet_cmd_addnote = ADDNOTE $@

arch/ppc/kernel/cpu_setup_power4.S

@@ -18,24 +18,37 @@
 #include <asm/offsets.h>
 #include <asm/cache.h>
 
-_GLOBAL(__power4_cpu_preinit)
+_GLOBAL(__970_cpu_preinit)
 	/*
-	 * On the PPC970, we have to turn off real-mode cache inhibit
-	 * early, before we first turn the MMU off.
+	 * Deal only with PPC970 and PPC970FX.
 	 */
 	mfspr	r0,SPRN_PVR
 	srwi	r0,r0,16
-	cmpwi	r0,0x39
+	cmpwi	cr0,r0,0x39
+	cmpwi	cr1,r0,0x3c
+	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
 	bnelr
 
+	/* Make sure HID4:rm_ci is off before MMU is turned off, that large
+	 * pages are enabled with HID4:61 and clear HID5:DCBZ_size and
+	 * HID5:DCBZ32_ill
+	 */
 	li	r0,0
+	mfspr	r11,SPRN_HID4
+	rldimi	r11,r0,40,23	/* clear bit 23 (rm_ci) */
+	rldimi	r11,r0,2,61	/* clear bit 61 (lg_pg_en) */
 	sync
-	mtspr	SPRN_HID4,r0
+	mtspr	SPRN_HID4,r11
 	isync
 	sync
-	mtspr	SPRN_HID5,r0
+	mfspr	r11,SPRN_HID5
+	rldimi	r11,r0,6,56	/* clear bits 56 & 57 (DCBZ*) */
+	sync
+	mtspr	SPRN_HID5,r11
 	isync
+	sync
 
+	/* Setup some basic HID1 features */
 	mfspr	r0,SPRN_HID1
 	li	r11,0x1200		/* enable i-fetch cacheability */
 	sldi	r11,r11,44		/* and prefetch */
@@ -43,6 +56,8 @@ _GLOBAL(__power4_cpu_preinit)
 	mtspr	SPRN_HID1,r0
 	mtspr	SPRN_HID1,r0
 	isync
+
+	/* Clear HIOR */
 	li	r0,0
 	sync
 	mtspr	SPRN_HIOR,0		/* Clear interrupt prefix */

arch/ppc/kernel/cputable.c

@@ -323,6 +323,17 @@ struct cpu_spec	cpu_specs[] = {
 	32, 32,
 	__setup_cpu_745x
     },
+    {	/* 7447A */
+    	0xffff0000, 0x80030000, "7447A",
+	CPU_FTR_COMMON |
+    	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
+	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP |
+	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
+	CPU_FTR_HAS_HIGH_BATS,
+	COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP,
+	32, 32,
+	__setup_cpu_745x
+    },
     {	/* 82xx (8240, 8245, 8260 are all 603e cores) */
 	0x7fff0000, 0x00810000, "82xx",
 	CPU_FTR_COMMON |

arch/ppc/kernel/head.S

@@ -153,7 +153,7 @@ __start:
  * like real mode cache inhibit or exception base
  */
 #ifdef CONFIG_POWER4
-	bl	__power4_cpu_preinit
+	bl	__970_cpu_preinit
 #endif /* CONFIG_POWER4 */
 
 #ifdef CONFIG_APUS

arch/ppc/platforms/pmac_feature.c

@@ -578,7 +578,6 @@ heathrow_sleep(struct macio_chip* macio, int secondary)
 
 	/* Let things settle */
 	(void)MACIO_IN32(HEATHROW_FCR);
-	mdelay(1);
 }
 
 static void __pmac
@@ -2102,7 +2101,7 @@ static struct pmac_mb_def pmac_mb_defs[] __pmacdata = {
 		0,
 	},
 	{	"PowerMac3,6",			"PowerMac G4 Windtunnel",
-		PMAC_TYPE_WINDTUNNEL,		rackmac_features,
+		PMAC_TYPE_WINDTUNNEL,		core99_features,
 		0,
 	},
 	{	"PowerBook5,1",			"PowerBook G4 17\"",
@@ -2129,6 +2128,10 @@ static struct pmac_mb_def pmac_mb_defs[] __pmacdata = {
 		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
 		PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
 	},
+	{	"PowerBook6,5",			"iBook G4",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
 #else /* CONFIG_POWER4 */
 	{	"PowerMac7,2",			"PowerMac G5",
 		PMAC_TYPE_POWERMAC_G5,		g5_features,

arch/ppc64/kernel/cpu_setup_power4.S

@@ -18,31 +18,53 @@
 #include <asm/offsets.h>
 #include <asm/cache.h>
 
-_GLOBAL(__power4_cpu_preinit)
+_GLOBAL(__970_cpu_preinit)
 	/*
-	 * On the PPC970, we have to turn off real-mode cache inhibit
-	 * early, before we first turn the MMU off.
+	 * Do nothing if not running in HV mode
+	 */
+	mfmsr	r0
+	rldicl.	r0,r0,4,63
+	beqlr
+
+	/*
+	 * Deal only with PPC970 and PPC970FX.
 	 */
 	mfspr	r0,SPRN_PVR
 	srwi	r0,r0,16
-	cmpwi	r0,0x39
+	cmpwi	cr0,r0,0x39
+	cmpwi	cr1,r0,0x3c
+	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
 	bnelr
 
+	/* Make sure HID4:rm_ci is off before MMU is turned off, that large
+	 * pages are enabled with HID4:61 and clear HID5:DCBZ_size and
+	 * HID5:DCBZ32_ill
+	 */
 	li	r0,0
+	mfspr	r3,SPRN_HID4
+	rldimi	r3,r0,40,23	/* clear bit 23 (rm_ci) */
+	rldimi	r3,r0,2,61	/* clear bit 61 (lg_pg_en) */
 	sync
-	mtspr	SPRN_HID4,r0
+	mtspr	SPRN_HID4,r3
 	isync
 	sync
-	mtspr	SPRN_HID5,r0
+	mfspr	r3,SPRN_HID5
+	rldimi	r3,r0,6,56	/* clear bits 56 & 57 (DCBZ*) */
+	sync
+	mtspr	SPRN_HID5,r3
 	isync
+	sync
 
+	/* Setup some basic HID1 features */
 	mfspr	r0,SPRN_HID1
-	li	r11,0x1200		/* enable i-fetch cacheability */
-	sldi	r11,r11,44		/* and prefetch */
-	or	r0,r0,r11
+	li	r3,0x1200		/* enable i-fetch cacheability */
+	sldi	r3,r3,44		/* and prefetch */
+	or	r0,r0,r3
 	mtspr	SPRN_HID1,r0
 	mtspr	SPRN_HID1,r0
 	isync
+
+	/* Clear HIOR */
 	li	r0,0
 	sync
 	mtspr	SPRN_HIOR,0		/* Clear interrupt prefix */

arch/ppc64/kernel/head.S

@@ -1469,7 +1469,7 @@ _GLOBAL(__start_initialization_pSeries)
 	mr	r23,r3			/* Save phys address we are running at */
 
 	/* Setup some critical 970 SPRs before switching MMU off */
-	bl	.__power4_cpu_preinit
+	bl	.__970_cpu_preinit
 
 	li	r24,0			/* cpu # */
 

arch/ppc64/mm/hugetlbpage.c

@@ -155,9 +155,20 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len)
 	return 0;
 }
 
-static void do_slbia(void *unused)
+static void flush_segments(void *parm)
 {
-	asm volatile ("isync; slbia; isync":::"memory");
+	u16 segs = (unsigned long) parm;
+	unsigned long i;
+
+	asm volatile("isync" : : : "memory");
+
+	for (i = 0; i < 16; i++) {
+		if (! (segs & (1U << i)))
+			continue;
+		asm volatile("slbie %0" : : "r" (i << SID_SHIFT));
+	}
+
+	asm volatile("isync" : : : "memory");
 }
 
 static int prepare_low_seg_for_htlb(struct mm_struct *mm, unsigned long seg)
@@ -226,10 +237,10 @@ static int open_low_hpage_segs(struct mm_struct *mm, u16 newsegs)
 				return -EBUSY;
 
 	mm->context.htlb_segs |= newsegs;
-	/* the context change must make it to memory before the slbia,
+	/* the context change must make it to memory before the flush,
 	 * so that further SLB misses do the right thing. */
 	mb();
-	on_each_cpu(do_slbia, NULL, 0, 1);
+	on_each_cpu(flush_segments, (void *)(unsigned long)newsegs, 0, 1);
 
 	return 0;
 }

arch/sparc/lib/bitext.c

@@ -42,7 +42,10 @@ int bit_map_string_get(struct bit_map *t, int len, int align)
 		BUG();
 
 	spin_lock(&t->lock);
-	offset = t->last_off & ~align1;
+	if (len < t->last_size)
+		offset = t->first_free;
+	else
+		offset = t->last_off & ~align1;
 	count = 0;
 	for (;;) {
 		off_new = find_next_zero_bit(t->map, t->size, offset);
@@ -71,9 +74,14 @@ int bit_map_string_get(struct bit_map *t, int len, int align)
 			if (i == len) {
 				for (i = 0; i < len; i++)
 					__set_bit(offset + i, t->map);
+				if (offset == t->first_free)
+					t->first_free = find_next_zero_bit
+							(t->map, t->size,
+							 t->first_free + len);
 				if ((t->last_off = offset + len) >= t->size)
 					t->last_off = 0;
 				t->used += len;
+				t->last_size = len;
 				spin_unlock(&t->lock);
 				return offset;
 			}
@@ -96,6 +104,8 @@ void bit_map_clear(struct bit_map *t, int offset, int len)
 			BUG();
 		__clear_bit(offset + i, t->map);
 	}
+	if (offset < t->first_free)
+		t->first_free = offset;
 	t->used -= len;
 	spin_unlock(&t->lock);
 }
@@ -111,4 +121,6 @@ void bit_map_init(struct bit_map *t, unsigned long *map, int size)
 	spin_lock_init(&t->lock);
 	t->map = map;
 	t->size = size;
+	t->last_size = 0;
+	t->first_free = 0;
 }

arch/sparc/mm/init.c

@@ -369,9 +369,8 @@ static void __init taint_real_pages(void)
 		end = start + sp_banks[i].num_bytes;
 
 		while (start < end) {
-			set_bit (start >> 20,
-				sparc_valid_addr_bitmap);
-				start += PAGE_SIZE;
+			set_bit(start >> 20, sparc_valid_addr_bitmap);
+			start += PAGE_SIZE;
 		}
 	}
 }
@@ -400,6 +399,7 @@ void __init mem_init(void)
 	int codepages = 0;
 	int datapages = 0;
 	int initpages = 0; 
+	int reservedpages = 0;
 	int i;
 
 	highmem_start_page = pfn_to_page(highstart_pfn);
@@ -434,12 +434,14 @@ void __init mem_init(void)
 	max_mapnr = last_valid_pfn - pfn_base;
 	high_memory = __va(max_low_pfn << PAGE_SHIFT);
 
-	num_physpages = totalram_pages = free_all_bootmem();
+	totalram_pages = free_all_bootmem();
 
 	for (i = 0; sp_banks[i].num_bytes != 0; i++) {
 		unsigned long start_pfn = sp_banks[i].base_addr >> PAGE_SHIFT;
 		unsigned long end_pfn = (sp_banks[i].base_addr + sp_banks[i].num_bytes) >> PAGE_SHIFT;
 
+		num_physpages += sp_banks[i].num_bytes >> PAGE_SHIFT;
+
 		if (end_pfn <= highstart_pfn)
 			continue;
 
@@ -458,13 +460,20 @@ void __init mem_init(void)
 	initpages = (((unsigned long) &__init_end) - ((unsigned long) &__init_begin));
 	initpages = PAGE_ALIGN(initpages) >> PAGE_SHIFT;
 
-	printk(KERN_INFO "Memory: %dk available (%dk kernel code, %dk data, %dk init, %ldk highmem) [%08lx,%08lx]\n",
-	       nr_free_pages() << (PAGE_SHIFT-10),
+	/* Ignore memory holes for the purpose of counting reserved pages */
+	for (i=0; i < max_low_pfn; i++)
+		if (test_bit(i >> (20 - PAGE_SHIFT), sparc_valid_addr_bitmap)
+		    && PageReserved(pfn_to_page(i)))
+			reservedpages++;
+
+	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init, %ldk highmem)\n",
+	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+	       num_physpages << (PAGE_SHIFT - 10),
 	       codepages << (PAGE_SHIFT-10),
+	       reservedpages << (PAGE_SHIFT - 10),
 	       datapages << (PAGE_SHIFT-10), 
 	       initpages << (PAGE_SHIFT-10),
-	       totalhigh_pages << (PAGE_SHIFT-10),
-	       (unsigned long)PAGE_OFFSET, (last_valid_pfn << PAGE_SHIFT));
+	       totalhigh_pages << (PAGE_SHIFT-10));
 }
 
 void free_initmem (void)

arch/sparc/mm/srmmu.c

@@ -276,6 +276,23 @@ static inline pte_t *srmmu_pte_offset(pmd_t * dir, unsigned long address)
 	    ((address >> PAGE_SHIFT) & (SRMMU_PTRS_PER_PTE_SOFT - 1));
 }
 
+static unsigned long srmmu_swp_type(swp_entry_t entry)
+{
+	return (entry.val >> SRMMU_SWP_TYPE_SHIFT) & SRMMU_SWP_TYPE_MASK;
+}
+
+static unsigned long srmmu_swp_offset(swp_entry_t entry)
+{
+	return (entry.val >> SRMMU_SWP_OFF_SHIFT) & SRMMU_SWP_OFF_MASK;
+}
+
+static swp_entry_t srmmu_swp_entry(unsigned long type, unsigned long offset)
+{
+	return (swp_entry_t) {
+		  (type & SRMMU_SWP_TYPE_MASK) << SRMMU_SWP_TYPE_SHIFT
+		| (offset & SRMMU_SWP_OFF_MASK) << SRMMU_SWP_OFF_SHIFT };
+}
+
 /*
  * size: bytes to allocate in the nocache area.
  * align: bytes, number to align at.
@@ -2205,6 +2222,10 @@ void __init ld_mmu_srmmu(void)
 	BTFIXUPSET_CALL(sparc_mapiorange, srmmu_mapiorange, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(sparc_unmapiorange, srmmu_unmapiorange, BTFIXUPCALL_NORM);
 
+	BTFIXUPSET_CALL(__swp_type, srmmu_swp_type, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(__swp_offset, srmmu_swp_offset, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(__swp_entry, srmmu_swp_entry, BTFIXUPCALL_NORM);
+
 	BTFIXUPSET_CALL(mmu_info, srmmu_mmu_info, BTFIXUPCALL_NORM);
 
 	BTFIXUPSET_CALL(alloc_thread_info, srmmu_alloc_thread_info, BTFIXUPCALL_NORM);

arch/sparc/mm/sun4c.c

@@ -1863,6 +1863,23 @@ pte_t *sun4c_pte_offset_kernel(pmd_t * dir, unsigned long address)
 			((address >> PAGE_SHIFT) & (SUN4C_PTRS_PER_PTE - 1));
 }
 
+static unsigned long sun4c_swp_type(swp_entry_t entry)
+{
+	return (entry.val & SUN4C_SWP_TYPE_MASK);
+}
+
+static unsigned long sun4c_swp_offset(swp_entry_t entry)
+{
+	return (entry.val >> SUN4C_SWP_OFF_SHIFT) & SUN4C_SWP_OFF_MASK;
+}
+
+static swp_entry_t sun4c_swp_entry(unsigned long type, unsigned long offset)
+{
+	return (swp_entry_t) {
+		  (offset & SUN4C_SWP_OFF_MASK) << SUN4C_SWP_OFF_SHIFT
+		| (type & SUN4C_SWP_TYPE_MASK) };
+}
+
 static void sun4c_free_pte_slow(pte_t *pte)
 {
 	free_page((unsigned long)pte);
@@ -2242,6 +2259,10 @@ void __init ld_mmu_sun4c(void)
 	BTFIXUPSET_CALL(sparc_mapiorange, sun4c_mapiorange, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(sparc_unmapiorange, sun4c_unmapiorange, BTFIXUPCALL_NORM);
 
+	BTFIXUPSET_CALL(__swp_type, sun4c_swp_type, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(__swp_offset, sun4c_swp_offset, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(__swp_entry, sun4c_swp_entry, BTFIXUPCALL_NORM);
+
 	BTFIXUPSET_CALL(alloc_thread_info, sun4c_alloc_thread_info, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(free_thread_info, sun4c_free_thread_info, BTFIXUPCALL_NORM);
 

arch/sparc64/kernel/sys_sparc.c

@@ -57,7 +57,8 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 		/* We do not accept a shared mapping if it would violate
 		 * cache aliasing constraints.
 		 */
-		if ((flags & MAP_SHARED) && (addr & (SHMLBA - 1)))
+		if ((flags & MAP_SHARED) &&
+		    ((addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)))
 			return -EINVAL;
 		return addr;
 	}

arch/x86_64/kernel/nmi.c

@@ -33,6 +33,20 @@
 #include <asm/proto.h>
 #include <asm/kdebug.h>
 
+/*
+ * lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
+ * - it may be reserved by some other driver, or not
+ * - when not reserved by some other driver, it may be used for
+ *   the NMI watchdog, or not
+ *
+ * This is maintained separately from nmi_active because the NMI
+ * watchdog may also be driven from the I/O APIC timer.
+ */
+static spinlock_t lapic_nmi_owner_lock = SPIN_LOCK_UNLOCKED;
+static unsigned int lapic_nmi_owner;
+#define LAPIC_NMI_WATCHDOG	(1<<0)
+#define LAPIC_NMI_RESERVED	(1<<1)
+
 /* nmi_active:
  * +1: the lapic NMI watchdog is active, but can be disabled
  *  0: the lapic NMI watchdog has not been set up, and cannot
@@ -122,6 +136,7 @@ int __init check_nmi_watchdog (void)
 			       cpu,
 			       cpu_pda[cpu].__nmi_count);
 			nmi_active = 0;
+			lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
 			return -1;
 		}
 	}
@@ -157,7 +172,7 @@ int __init setup_nmi_watchdog(char *str)
 
 __setup("nmi_watchdog=", setup_nmi_watchdog);
 
-void disable_lapic_nmi_watchdog(void)
+static void disable_lapic_nmi_watchdog(void)
 {
 	if (nmi_active <= 0)
 		return;
@@ -174,7 +189,7 @@ void disable_lapic_nmi_watchdog(void)
 	nmi_watchdog = 0;
 }
 
-void enable_lapic_nmi_watchdog(void)
+static void enable_lapic_nmi_watchdog(void)
 {
 	if (nmi_active < 0) {
 		nmi_watchdog = NMI_LOCAL_APIC;
@@ -182,6 +197,33 @@ void enable_lapic_nmi_watchdog(void)
 	}
 }
 
+int reserve_lapic_nmi(void)
+{
+	unsigned int old_owner;
+
+	spin_lock(&lapic_nmi_owner_lock);
+	old_owner = lapic_nmi_owner;
+	lapic_nmi_owner |= LAPIC_NMI_RESERVED;
+	spin_unlock(&lapic_nmi_owner_lock);
+	if (old_owner & LAPIC_NMI_RESERVED)
+		return -EBUSY;
+	if (old_owner & LAPIC_NMI_WATCHDOG)
+		disable_lapic_nmi_watchdog();
+	return 0;
+}
+
+void release_lapic_nmi(void)
+{
+	unsigned int new_owner;
+
+	spin_lock(&lapic_nmi_owner_lock);
+	new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED;
+	lapic_nmi_owner = new_owner;
+	spin_unlock(&lapic_nmi_owner_lock);
+	if (new_owner & LAPIC_NMI_WATCHDOG)
+		enable_lapic_nmi_watchdog();
+}
+
 void disable_timer_nmi_watchdog(void)
 {
 	if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0))
@@ -236,7 +278,7 @@ static int __init init_lapic_nmi_sysfs(void)
 {
 	int error;
 
-	if (nmi_active == 0)
+	if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC)
 		return 0;
 
 	error = sysdev_class_register(&nmi_sysclass);
@@ -298,6 +340,7 @@ void setup_apic_nmi_watchdog(void)
 	default:
 		return;
 	}
+	lapic_nmi_owner = LAPIC_NMI_WATCHDOG;
 	nmi_active = 1;
 }
 
@@ -405,8 +448,8 @@ void unset_nmi_callback(void)
 
 EXPORT_SYMBOL(nmi_active);
 EXPORT_SYMBOL(nmi_watchdog);
-EXPORT_SYMBOL(disable_lapic_nmi_watchdog);
-EXPORT_SYMBOL(enable_lapic_nmi_watchdog);
+EXPORT_SYMBOL(reserve_lapic_nmi);
+EXPORT_SYMBOL(release_lapic_nmi);
 EXPORT_SYMBOL(disable_timer_nmi_watchdog);
 EXPORT_SYMBOL(enable_timer_nmi_watchdog);
 EXPORT_SYMBOL(touch_nmi_watchdog);

drivers/ieee1394/ieee1394_core.c

@@ -994,7 +994,7 @@ void abort_timedouts(unsigned long __opaque)
  * packets that have a "complete" function are sent here. This way, the
  * completion is run out of kernel context, and doesn't block the rest of
  * the stack. */
-static int khpsbpkt_pid = -1;
+static int khpsbpkt_pid = -1, khpsbpkt_kill;
 static DECLARE_COMPLETION(khpsbpkt_complete);
 struct sk_buff_head hpsbpkt_queue;
 static DECLARE_MUTEX_LOCKED(khpsbpkt_sig);
@@ -1021,6 +1021,9 @@ static int hpsbpkt_thread(void *__hi)
 	daemonize("khpsbpkt");
 
 	while (!down_interruptible(&khpsbpkt_sig)) {
+		if (khpsbpkt_kill)
+			break;
+
 		while ((skb = skb_dequeue(&hpsbpkt_queue)) != NULL) {
 			packet = (struct hpsb_packet *)skb->data;
 
@@ -1094,7 +1097,9 @@ static void __exit ieee1394_cleanup(void)
 	bus_unregister(&ieee1394_bus_type);
 
 	if (khpsbpkt_pid >= 0) {
-		kill_proc(khpsbpkt_pid, SIGTERM, 1);
+		khpsbpkt_kill = 1;
+		mb();
+		up(&khpsbpkt_sig);
 		wait_for_completion(&khpsbpkt_complete);
 	}
 

drivers/ieee1394/nodemgr.c

@@ -117,6 +117,7 @@ struct host_info {
 	struct semaphore reset_sem;
 	int pid;
 	char daemon_name[15];
+	int kill_me;
 };
 
 static int nodemgr_bus_match(struct device * dev, struct device_driver * drv);
@@ -1478,6 +1479,9 @@ static int nodemgr_host_thread(void *__hi)
 		unsigned int generation = 0;
 		int i;
 
+		if (hi->kill_me)
+			break;
+
 		/* Pause for 1/4 second in 1/16 second intervals,
 		 * to make sure things settle down. */
 		for (i = 0; i < 4 ; i++) {
@@ -1678,7 +1682,9 @@ static void nodemgr_remove_host(struct hpsb_host *host)
 
 	if (hi) {
 		if (hi->pid >= 0) {
-			kill_proc(hi->pid, SIGTERM, 1);
+			hi->kill_me = 1;
+			mb();
+			up(&hi->reset_sem);
 			wait_for_completion(&hi->exited);
 			nodemgr_remove_host_dev(&host->device);
 		}

drivers/media/video/videodev.c

@@ -316,7 +316,14 @@ int video_register_device(struct video_device *vfd, int type, int nr)
 
 	/* pick a minor number */
 	down(&videodev_lock);
-	if (-1 == nr) {
+	if (nr >= 0  &&  nr < end-base) {
+		/* use the one the driver asked for */
+		i = base+nr;
+		if (NULL != video_device[i]) {
+			up(&videodev_lock);
+			return -ENFILE;
+		}
+	} else {
 		/* use first free */
 		for(i=base;i<end;i++)
 			if (NULL == video_device[i])
@@ -325,13 +332,6 @@ int video_register_device(struct video_device *vfd, int type, int nr)
 			up(&videodev_lock);
 			return -ENFILE;
 		}
-	} else {
-		/* use the one the driver asked for */
-		i = base+nr;
-		if (NULL != video_device[i]) {
-			up(&videodev_lock);
-			return -ENFILE;
-		}
 	}
 	video_device[i]=vfd;
 	vfd->minor=i;

drivers/net/dummy.c

@@ -104,7 +104,7 @@ static struct net_device **dummies;
 
 /* Number of dummy devices to be set up by this module. */
 module_param(numdummies, int, 0);
-MODULE_PARM_DESC(numdimmies, "Number of dummy psuedo devices");
+MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
 
 static int __init dummy_init_one(int index)
 {

drivers/pcmcia/ti113x.h

@@ -150,6 +150,10 @@
 /* ExCA IO offset registers */
 #define TI113X_IO_OFFSET(map)		(0x36+((map)<<1))
 
+/* EnE test register */
+#define ENE_TEST_C9			0xc9	/* 8bit */
+#define ENE_TEST_C9_TLTENABLE		0x02
+
 #ifdef CONFIG_CARDBUS
 
 /*
@@ -160,6 +164,7 @@
 #define ti_devctl(socket)	((socket)->private[2])
 #define ti_diag(socket)		((socket)->private[3])
 #define ti_mfunc(socket)	((socket)->private[4])
+#define ene_test_c9(socket)	((socket)->private[5])
 
 /*
  * These are the TI specific power management handlers.
@@ -171,6 +176,9 @@ static void ti_save_state(struct yenta_socket *socket)
 	ti_cardctl(socket) = config_readb(socket, TI113X_CARD_CONTROL);
 	ti_devctl(socket) = config_readb(socket, TI113X_DEVICE_CONTROL);
 	ti_diag(socket) = config_readb(socket, TI1250_DIAGNOSTIC);
+
+	if (socket->dev->vendor == PCI_VENDOR_ID_ENE)
+		ene_test_c9(socket) = config_readb(socket, ENE_TEST_C9);
 }
 
 static void ti_restore_state(struct yenta_socket *socket)
@@ -180,6 +188,9 @@ static void ti_restore_state(struct yenta_socket *socket)
 	config_writeb(socket, TI113X_CARD_CONTROL, ti_cardctl(socket));
 	config_writeb(socket, TI113X_DEVICE_CONTROL, ti_devctl(socket));
 	config_writeb(socket, TI1250_DIAGNOSTIC, ti_diag(socket));
+
+	if (socket->dev->vendor == PCI_VENDOR_ID_ENE)
+		config_writeb(socket, ENE_TEST_C9, ene_test_c9(socket));
 }
 
 /*
@@ -591,6 +602,16 @@ static int ti12xx_override(struct yenta_socket *socket)
 		config_writel(socket, TI113X_SYSTEM_CONTROL, val);
 	}
 
+	/*
+	 * for EnE bridges only: clear testbit TLTEnable. this makes the
+	 * RME Hammerfall DSP sound card working.
+	 */
+	if (socket->dev->vendor == PCI_VENDOR_ID_ENE) {
+		u8 test_c9 = config_readb(socket, ENE_TEST_C9);
+		test_c9 &= ~ENE_TEST_C9_TLTENABLE;
+		config_writeb(socket, ENE_TEST_C9, test_c9);
+	}
+
 	/*
 	 * Yenta expects controllers to use CSCINT to route
 	 * CSC interrupts to PCI rather than INTVAL.

drivers/serial/8250_hcdp.c

@@ -11,6 +11,7 @@
  */
 
 #include <linux/config.h>
+#include <linux/console.h>
 #include <linux/kernel.h>
 #include <linux/efi.h>
 #include <linux/init.h>
@@ -44,6 +45,7 @@ setup_serial_hcdp(void *tablep)
 	unsigned long iobase;
 	hcdp_t hcdp;
 	int gsi, nr;
+	static char options[16];
 #if 0
 	static int shift_once = 1;
 #endif
@@ -147,7 +149,7 @@ setup_serial_hcdp(void *tablep)
 		printk("  gsi = %d, baud rate = %lu, bits = %d, clock = %d\n",
 		       gsi, (unsigned long) hcdp_dev->baud, hcdp_dev->bits,
 		       hcdp_dev->clock_rate);
-		if (hcdp_dev->base_addr.space_id == ACPI_PCICONF_SPACE)
+		if (HCDP_PCI_UART(hcdp_dev))
 			printk(" PCI id: %02x:%02x:%02x, vendor ID=0x%x, "
 				"dev ID=0x%x\n", hcdp_dev->pci_seg,
 				hcdp_dev->pci_bus, hcdp_dev->pci_dev,
@@ -179,16 +181,26 @@ setup_serial_hcdp(void *tablep)
 			printk(KERN_WARNING"warning: No support for PCI serial console\n");
 			return;
 		}
+
+		if (HCDP_IRQ_SUPPORTED(hcdp_dev)) {
 #ifdef CONFIG_IA64
-		port.irq = acpi_register_irq(gsi, ACPI_ACTIVE_HIGH,
-				ACPI_EDGE_SENSITIVE);
+			if (HCDP_PCI_UART(hcdp_dev))
+				port.irq = acpi_register_irq(gsi,
+					ACPI_ACTIVE_LOW, ACPI_LEVEL_SENSITIVE);
+			else
+				port.irq = acpi_register_irq(gsi,
+					ACPI_ACTIVE_HIGH, ACPI_EDGE_SENSITIVE);
 #else
-		port.irq = gsi;
+			port.irq = gsi;
 #endif
-		port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_RESOURCES;
-		if (gsi)
 			port.flags |= UPF_AUTO_IRQ;
 
+			if (HCDP_PCI_UART(hcdp_dev))
+				port.flags |= UPF_SHARE_IRQ;
+		}
+
+		port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_RESOURCES;
+
 		/*
 		 * Note: the above memset() initializes port.line to 0,
 		 * so we register this port as ttyS0.
@@ -197,8 +209,15 @@ setup_serial_hcdp(void *tablep)
 			printk("setup_serial_hcdp(): early_serial_setup() "
 				"for HCDP serial console port failed. "
 				"Will try any additional consoles in HCDP.\n");
+			memset(&port, 0, sizeof(port));
 			continue;
 		}
+
+		if (efi_uart_console_only()) {
+			snprintf(options, sizeof(options), "%lun%d",
+				hcdp_dev->baud, hcdp_dev->bits);
+			add_preferred_console("ttyS", port.line, options);
+		}
 		break;
 	}
 

drivers/serial/8250_hcdp.h

@@ -77,3 +77,6 @@ typedef struct {
 	u32	num_entries;
 	hcdp_dev_t	hcdp_dev[MAX_HCDP_DEVICES];
 } hcdp_t;
+
+#define HCDP_PCI_UART(x) (x->pci_func & 1UL<<7)
+#define HCDP_IRQ_SUPPORTED(x) (x->pci_func & 1UL<<6)

drivers/serial/8250_pci.c

@@ -20,6 +20,7 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
@@ -305,6 +306,72 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev)
 	}
 }
 
+/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
+static int
+sbs_setup(struct pci_dev *dev, struct pci_board *board,
+		struct serial_struct *req, int idx)
+{
+	unsigned int bar, offset = board->first_offset;
+
+	bar = 0;
+
+	if (idx < 4) {
+		/* first four channels map to 0, 0x100, 0x200, 0x300 */
+		offset += idx * board->uart_offset;
+	} else if (idx < 8) {
+		/* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
+		offset += idx * board->uart_offset + 0xC00;
+	} else /* we have only 8 ports on PMC-OCTALPRO */
+		return 1;
+
+	return setup_port(dev, req, bar, offset, board->reg_shift);
+}
+
+/*
+* This does initialization for PMC OCTALPRO cards:
+* maps the device memory, resets the UARTs (needed, bc
+* if the module is removed and inserted again, the card
+* is in the sleep mode) and enables global interrupt.
+*/
+
+/* global control register offset for SBS PMC-OctalPro */
+#define OCT_REG_CR_OFF		0x500
+
+static int __devinit sbs_init(struct pci_dev *dev)
+{
+	u8 * p;
+
+	p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
+
+	if (p == NULL)
+		return -ENOMEM;
+	/* Set bit-4 Control Register (UART RESET) in to reset the uarts */
+	writeb(0x10,p + OCT_REG_CR_OFF);
+	udelay(50);
+	writeb(0x0,p + OCT_REG_CR_OFF);
+
+	/* Set bit-2 (INTENABLE) of Control Register */
+	writeb(0x4, p + OCT_REG_CR_OFF);
+	iounmap(p);
+
+	return 0;
+}
+
+/*
+ * Disables the global interrupt of PMC-OctalPro
+ */
+
+static void __devexit sbs_exit(struct pci_dev *dev)
+{
+	u8 * p;
+
+	p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
+	if (p != NULL) {
+		writeb(0, p + OCT_REG_CR_OFF);
+	}
+	iounmap(p);
+}
+
 /*
  * SIIG serial cards have an PCI interface chip which also controls
  * the UART clocking frequency. Each UART can be clocked independently
@@ -534,6 +601,15 @@ pci_default_setup(struct pci_dev *dev, struct pci_board *board,
 	return setup_port(dev, req, bar, offset, board->reg_shift);
 }
 
+/* This should be in linux/pci_ids.h */
+#define PCI_VENDOR_ID_SBSMODULARIO	0x124B
+#define PCI_SUBVENDOR_ID_SBSMODULARIO	0x124B
+#define PCI_DEVICE_ID_OCTPRO		0x0001
+#define PCI_SUBDEVICE_ID_OCTPRO232	0x0108
+#define PCI_SUBDEVICE_ID_OCTPRO422	0x0208
+#define PCI_SUBDEVICE_ID_POCTAL232	0x0308
+#define PCI_SUBDEVICE_ID_POCTAL422	0x0408
+
 /*
  * Master list of serial port init/setup/exit quirks.
  * This does not describe the general nature of the port.
@@ -618,6 +694,55 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.setup		= pci_default_setup,
 		.exit		= __devexit_p(pci_plx9050_exit),
 	},
+	/*
+	 * SBS Technologies, Inc., PMC-OCTALPRO 232
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SBSMODULARIO,
+		.device		= PCI_DEVICE_ID_OCTPRO,
+		.subvendor	= PCI_SUBVENDOR_ID_SBSMODULARIO,
+		.subdevice	= PCI_SUBDEVICE_ID_OCTPRO232,
+		.init		= sbs_init,
+		.setup		= sbs_setup,
+		.exit		= sbs_exit
+	},
+	/*
+	 * SBS Technologies, Inc., PMC-OCTALPRO 422
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SBSMODULARIO,
+		.device		= PCI_DEVICE_ID_OCTPRO,
+		.subvendor	= PCI_SUBVENDOR_ID_SBSMODULARIO,
+		.subdevice	= PCI_SUBDEVICE_ID_OCTPRO422,
+		.init		= sbs_init,
+		.setup		= sbs_setup,
+		.exit		= sbs_exit
+	},
+	/*
+	 * SBS Technologies, Inc., P-Octal 232
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SBSMODULARIO,
+		.device		= PCI_DEVICE_ID_OCTPRO,
+		.subvendor	= PCI_SUBVENDOR_ID_SBSMODULARIO,
+		.subdevice	= PCI_SUBDEVICE_ID_POCTAL232,
+		.init		= sbs_init,
+		.setup		= sbs_setup,
+		.exit		= sbs_exit
+	},
+	/*
+	 * SBS Technologies, Inc., P-Octal 422
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SBSMODULARIO,
+		.device		= PCI_DEVICE_ID_OCTPRO,
+		.subvendor	= PCI_SUBVENDOR_ID_SBSMODULARIO,
+		.subdevice	= PCI_SUBDEVICE_ID_POCTAL422,
+		.init		= sbs_init,
+		.setup		= sbs_setup,
+		.exit		= sbs_exit
+	},
+
 	/*
 	 * SIIG cards.
 	 *  It is not clear whether these could be collapsed.
@@ -944,8 +1069,19 @@ enum pci_board_num_t {
 	pbn_computone_4,
 	pbn_computone_6,
 	pbn_computone_8,
+	pbn_sbsxrsio,
 };
 
+/*
+ * uart_offset - the space between channels
+ * reg_shift   - describes how the UART registers are mapped
+ *               to PCI memory by the card.
+ * For example IER register on SBS, Inc. PMC-OctPro is located at
+ * offset 0x10 from the UART base, while UART_IER is defined as 1
+ * in include/linux/serial_reg.h,
+ * see first lines of serial_in() and serial_out() in 8250.c
+*/
+
 static struct pci_board pci_boards[] __devinitdata = {
 	[pbn_default] = {
 		.flags		= FL_BASE0,
@@ -1348,6 +1484,13 @@ static struct pci_board pci_boards[] __devinitdata = {
 		.reg_shift	= 2,
 		.first_offset	= 0x200,
 	},
+	[pbn_sbsxrsio] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 460800,
+		.uart_offset	= 256,
+		.reg_shift	= 4,
+	}
 };
 
 /*
@@ -1755,27 +1898,44 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0x10b5, 0x106a, 0, 0,
 		pbn_plx_romulus },
 	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b1_4_115200 },
 	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b1_2_115200 },
 	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b1_8_115200 },
 	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b1_8_115200 },
 	{	PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
-		PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0, 
+		PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
 		pbn_b0_4_921600 },
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_4_115200 },
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_2_921600 },
 
+	/*
+	 * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
+	 * from skokodyn@yahoo.com
+	 */
+	{	PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+		PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
+		pbn_sbsxrsio },
+	{	PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+		PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
+		pbn_sbsxrsio },
+	{	PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+		PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
+		pbn_sbsxrsio },
+	{	PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+		PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
+		pbn_sbsxrsio },
+
 	/*
 	 * Digitan DS560-558, from jimd@esoft.com
 	 */

fs/jfs/jfs_dtree.c

@@ -982,7 +982,9 @@ static int dtSplitUp(tid_t tid,
 		split->pxdlist = &pxdlist;
 		rc = dtSplitRoot(tid, ip, split, &rmp);
 
-		DT_PUTPAGE(rmp);
+		if (!rc)
+			DT_PUTPAGE(rmp);
+
 		DT_PUTPAGE(smp);
 
 		goto freeKeyName;
@@ -1876,6 +1878,9 @@ static int dtSplitRoot(tid_t tid,
 	xlen = lengthPXD(pxd);
 	xsize = xlen << JFS_SBI(sb)->l2bsize;
 	rmp = get_metapage(ip, rbn, xsize, 1);
+	if (!rmp)
+		return -EIO;
+
 	rp = rmp->data;
 
 	BT_MARK_DIRTY(rmp, ip);

fs/jfs/jfs_txnmgr.c

@@ -176,7 +176,6 @@ static void dtLog(struct jfs_log * log, struct tblock * tblk, struct lrd * lrd,
 		struct tlock * tlck);
 static void mapLog(struct jfs_log * log, struct tblock * tblk, struct lrd * lrd,
 		struct tlock * tlck);
-static void txAbortCommit(struct commit * cd);
 static void txAllocPMap(struct inode *ip, struct maplock * maplock,
 		struct tblock * tblk);
 static void txForce(struct tblock * tblk);
@@ -1315,7 +1314,7 @@ int txCommit(tid_t tid,		/* transaction identifier */
 
       out:
 	if (rc != 0)
-		txAbortCommit(&cd);
+		txAbort(tid, 1);
 
       TheEnd:
 	jfs_info("txCommit: tid = %d, returning %d", tid, rc);
@@ -2647,64 +2646,6 @@ void txAbort(tid_t tid, int dirty)
 	return;
 }
 
-
-/*
- *      txAbortCommit()
- *
- * function: abort commit.
- *
- * frees tlocks of transaction; line-locks and segment locks for all
- * segments in comdata structure. frees malloc storage
- * sets state of file-system to FM_MDIRTY in super-block.
- * log age of page-frames in memory for which caller has
- * are reset to 0 (to avoid logwarap).
- */
-static void txAbortCommit(struct commit * cd)
-{
-	struct tblock *tblk;
-	tid_t tid;
-	lid_t lid, next;
-	struct metapage *mp;
-
-	jfs_warn("txAbortCommit: cd:0x%p", cd);
-
-	/*
-	 * free tlocks of the transaction
-	 */
-	tid = cd->tid;
-	tblk = tid_to_tblock(tid);
-	for (lid = tblk->next; lid; lid = next) {
-		next = lid_to_tlock(lid)->next;
-
-		mp = lid_to_tlock(lid)->mp;
-		if (mp) {
-			mp->lid = 0;
-
-			/*
-			 * reset lsn of page to avoid logwarap;
-			 */
-			if (mp->xflag & COMMIT_PAGE)
-				LogSyncRelease(mp);
-		}
-
-		/* insert tlock at head of freelist */
-		TXN_LOCK();
-		txLockFree(lid);
-		TXN_UNLOCK();
-	}
-
-	tblk->next = tblk->last = 0;
-
-	/* free the transaction block */
-	txEnd(tid);
-
-	/*
-	 * mark filesystem dirty
-	 */
-	jfs_error(cd->sb, "txAbortCommit");
-}
-
-
 /*
  *      txLazyCommit(void)
  *

fs/jfs/namei.c

@@ -792,14 +792,14 @@ static int jfs_link(struct dentry *old_dentry,
 		goto out;
 
 	if ((rc = dtSearch(dir, &dname, &ino, &btstack, JFS_CREATE)))
-		goto out;
+		goto free_dname;
 
 	/*
 	 * create entry for new link in parent directory
 	 */
 	ino = ip->i_ino;
 	if ((rc = dtInsert(tid, dir, &dname, &ino, &btstack)))
-		goto out;
+		goto free_dname;
 
 	/* update object inode */
 	ip->i_nlink++;		/* for new link */
@@ -812,6 +812,9 @@ static int jfs_link(struct dentry *old_dentry,
 	iplist[1] = dir;
 	rc = txCommit(tid, 2, &iplist[0], 0);
 
+      free_dname:
+	free_UCSname(&dname);
+
       out:
 	txEnd(tid);
 

include/asm-i386/apic.h

@@ -81,8 +81,8 @@ extern void smp_local_timer_interrupt (struct pt_regs * regs);
 extern void setup_boot_APIC_clock (void);
 extern void setup_secondary_APIC_clock (void);
 extern void setup_apic_nmi_watchdog (void);
-extern void disable_lapic_nmi_watchdog(void);
-extern void enable_lapic_nmi_watchdog(void);
+extern int reserve_lapic_nmi(void);
+extern void release_lapic_nmi(void);
 extern void disable_timer_nmi_watchdog(void);
 extern void enable_timer_nmi_watchdog(void);
 extern void nmi_watchdog_tick (struct pt_regs * regs);

include/asm-ppc/dma-mapping.h

@@ -184,4 +184,10 @@ static inline void dma_cache_sync(void *vaddr, size_t size,
 {
 	consistent_sync(vaddr, size, (int)direction);
 }
+
+static inline int dma_mapping_error(dma_addr_t dma_addr)
+{
+	return 0;
+}
+
 #endif				/* __ASM_PPC_DMA_MAPPING_H */

include/asm-ppc/pci.h

@@ -290,6 +290,11 @@ pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr,
 	/* Nothing to do. */
 }
 
+static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
+{
+	return 0;
+}
+
 /* Return the index of the PCI controller for device PDEV. */
 #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
 

include/asm-sparc/bitext.h

@@ -15,6 +15,8 @@ struct bit_map {
 	int size;
 	int used;
 	int last_off;
+	int last_size;
+	int first_free;
 };
 
 extern int bit_map_string_get(struct bit_map *t, int len, int align);

include/asm-sparc/pgtable.h

@@ -11,6 +11,7 @@
 
 #include <linux/config.h>
 #include <linux/spinlock.h>
+#include <linux/swap.h>
 #include <asm/types.h>
 #ifdef CONFIG_SUN4
 #include <asm/pgtsun4.h>
@@ -401,9 +402,14 @@ BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
 extern int invalid_segment;
 
 /* Encode and de-code a swap entry */
-#define __swp_type(x)			(((x).val >> 2) & 0x7f)
-#define __swp_offset(x)			(((x).val >> 9) & 0x3ffff)
-#define __swp_entry(type,offset)	((swp_entry_t) { (((type) & 0x7f) << 2) | (((offset) & 0x3ffff) << 9) })
+BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
+BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
+BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
+
+#define __swp_type(__x)			BTFIXUP_CALL(__swp_type)(__x)
+#define __swp_offset(__x)		BTFIXUP_CALL(__swp_offset)(__x)
+#define __swp_entry(__type,__off)	BTFIXUP_CALL(__swp_entry)(__type,__off)
+
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val })
 

include/asm-sparc/pgtsrmmu.h

@@ -90,6 +90,22 @@
 
 #define SRMMU_CHG_MASK    (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
 
+/* SRMMU swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * oooooooooooooooooootttttRRRRRRRR
+ * fedcba9876543210fedcba9876543210
+ *
+ * The bottom 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SRMMU_SWP_TYPE_MASK	0x1f
+#define SRMMU_SWP_TYPE_SHIFT	SRMMU_PTE_FILE_SHIFT
+#define SRMMU_SWP_OFF_MASK	0x7ffff
+#define SRMMU_SWP_OFF_SHIFT	(SRMMU_PTE_FILE_SHIFT + 5)
+
 /* Some day I will implement true fine grained access bits for
  * user pages because the SRMMU gives us the capabilities to
  * enforce all the protection levels that vma's can have.

include/asm-sparc/pgtsun4c.h

@@ -74,6 +74,21 @@
 #define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
 					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
 
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK	0x1f
+#define SUN4C_SWP_OFF_MASK	0x7ffff
+#define SUN4C_SWP_OFF_SHIFT	5
+
 #ifndef __ASSEMBLY__
 
 static inline unsigned long sun4c_get_synchronous_error(void)

include/asm-x86_64/apic.h

@@ -75,8 +75,8 @@ extern void smp_local_timer_interrupt (struct pt_regs * regs);
 extern void setup_boot_APIC_clock (void);
 extern void setup_secondary_APIC_clock (void);
 extern void setup_apic_nmi_watchdog (void);
-extern void disable_lapic_nmi_watchdog(void);
-extern void enable_lapic_nmi_watchdog(void);
+extern int reserve_lapic_nmi(void);
+extern void release_lapic_nmi(void);
 extern void disable_timer_nmi_watchdog(void);
 extern void enable_timer_nmi_watchdog(void);
 extern void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason);

include/linux/efi.h

@@ -212,6 +212,9 @@ typedef efi_status_t efi_set_virtual_address_map_t (unsigned long memory_map_siz
 #define UGA_IO_PROTOCOL_GUID \
     EFI_GUID(  0x61a4d49e, 0x6f68, 0x4f1b, 0xb9, 0x22, 0xa8, 0x6e, 0xed, 0xb, 0x7, 0xa2 )
 
+#define EFI_GLOBAL_VARIABLE_GUID \
+    EFI_GUID(  0x8be4df61, 0x93ca, 0x11d2, 0xaa, 0x0d, 0x00, 0xe0, 0x98, 0x03, 0x2b, 0x8c )
+
 typedef struct {
 	efi_guid_t guid;
 	unsigned long table;
@@ -294,6 +297,7 @@ extern void efi_enter_virtual_mode (void);	/* switch EFI to virtual mode, if pos
 extern u64 efi_get_iobase (void);
 extern u32 efi_mem_type (unsigned long phys_addr);
 extern u64 efi_mem_attributes (unsigned long phys_addr);
+extern int __init efi_uart_console_only (void);
 extern void efi_initialize_iomem_resources(struct resource *code_resource,
 					struct resource *data_resource);
 extern efi_status_t phys_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc);
@@ -322,6 +326,49 @@ extern struct efi_memory_map memmap;
 #define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x0000000000000002
 #define EFI_VARIABLE_RUNTIME_ACCESS     0x0000000000000004
 
+/*
+ * EFI Device Path information
+ */
+#define EFI_DEV_HW			0x01
+#define  EFI_DEV_PCI				 1
+#define  EFI_DEV_PCCARD				 2
+#define  EFI_DEV_MEM_MAPPED			 3
+#define  EFI_DEV_VENDOR				 4
+#define  EFI_DEV_CONTROLLER			 5
+#define EFI_DEV_ACPI			0x02
+#define   EFI_DEV_BASIC_ACPI			 1
+#define   EFI_DEV_EXPANDED_ACPI			 2
+#define EFI_DEV_MSG			0x03
+#define   EFI_DEV_MSG_ATAPI			 1
+#define   EFI_DEV_MSG_SCSI			 2
+#define   EFI_DEV_MSG_FC			 3
+#define   EFI_DEV_MSG_1394			 4
+#define   EFI_DEV_MSG_USB			 5
+#define   EFI_DEV_MSG_USB_CLASS			15
+#define   EFI_DEV_MSG_I20			 6
+#define   EFI_DEV_MSG_MAC			11
+#define   EFI_DEV_MSG_IPV4			12
+#define   EFI_DEV_MSG_IPV6			13
+#define   EFI_DEV_MSG_INFINIBAND		 9
+#define   EFI_DEV_MSG_UART			14
+#define   EFI_DEV_MSG_VENDOR			10
+#define EFI_DEV_MEDIA			0x04
+#define   EFI_DEV_MEDIA_HARD_DRIVE		 1
+#define   EFI_DEV_MEDIA_CDROM			 2
+#define   EFI_DEV_MEDIA_VENDOR			 3
+#define   EFI_DEV_MEDIA_FILE			 4
+#define   EFI_DEV_MEDIA_PROTOCOL		 5
+#define EFI_DEV_BIOS_BOOT		0x05
+#define EFI_DEV_END_PATH		0x7F
+#define EFI_DEV_END_PATH2		0xFF
+#define   EFI_DEV_END_INSTANCE			0x01
+#define   EFI_DEV_END_ENTIRE			0xFF
+
+struct efi_generic_dev_path {
+	u8 type;
+	u8 sub_type;
+	u16 length;
+} __attribute ((packed));
 
 /*
  * efi_dir is allocated in arch/ia64/kernel/efi.c.

include/linux/workqueue.h

@@ -7,6 +7,7 @@
 
 #include <linux/timer.h>
 #include <linux/linkage.h>
+#include <linux/bitops.h>
 
 struct workqueue_struct;
 
@@ -75,8 +76,12 @@ extern void init_workqueues(void);
  */
 static inline int cancel_delayed_work(struct work_struct *work)
 {
-	return del_timer_sync(&work->timer);
+	int ret;
+
+	ret = del_timer_sync(&work->timer);
+	if (ret)
+		clear_bit(0, &work->pending);
+	return ret;
 }
 
 #endif
-

include/net/sctp/constants.h

@@ -231,11 +231,6 @@ const char *sctp_pname(const sctp_subtype_t);	/* primitives */
 /* This is a table of printable names of sctp_state_t's.  */
 extern const char *sctp_state_tbl[], *sctp_evttype_tbl[], *sctp_status_tbl[];
 
-/* SCTP reachability state for each address */
-#define SCTP_ADDR_NOHB			4
-#define SCTP_ADDR_REACHABLE		2
-#define SCTP_ADDR_NOT_REACHABLE		1
-
 /* Maximum chunk length considering padding requirements. */
 enum { SCTP_MAX_CHUNK_LEN = ((1<<16) - sizeof(__u32)) };
 

include/net/sctp/user.h

 /* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
  * Copyright (c) 1999-2000 Cisco, Inc.
  * Copyright (c) 1999-2001 Motorola, Inc.
- * Copyright (c) 2001-2003 International Business Machines, Corp.
  * Copyright (c) 2002 Intel Corp.
  *
  * This file is part of the SCTP kernel reference Implementation
@@ -246,7 +246,7 @@ struct sctp_paddr_change {
  *   event that happened to the address.  They include:
  */
 enum sctp_spc_state {
-	SCTP_ADDR_REACHABLE,
+	SCTP_ADDR_AVAILABLE,
 	SCTP_ADDR_UNREACHABLE,
 	SCTP_ADDR_REMOVED,
 	SCTP_ADDR_ADDED,

ipc/mqueue.c

@@ -215,9 +215,11 @@ static void mqueue_delete_inode(struct inode *inode)
 
 	clear_inode(inode);
 
-	spin_lock(&mq_lock);
-	queues_count--;
-	spin_unlock(&mq_lock);
+	if (info->messages) {
+		spin_lock(&mq_lock);
+		queues_count--;
+		spin_unlock(&mq_lock);
+	}
 }
 
 static int mqueue_create(struct inode *dir, struct dentry *dentry,
@@ -811,9 +813,9 @@ asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *u_msg_ptr,
 			wait.msg = (void *) msg_ptr;
 			wait.state = STATE_NONE;
 			ret = wq_sleep(info, SEND, timeout, &wait);
-			if (ret < 0)
-				free_msg(msg_ptr);
 		}
+		if (ret < 0)
+			free_msg(msg_ptr);
 	} else {
 		receiver = wq_get_first_waiter(info, RECV);
 		if (receiver) {

kernel/printk.c

@@ -240,6 +240,7 @@ __setup("log_buf_len=", log_buf_len_setup);
  * 	7 -- Enable printk's to console
  *	8 -- Set level of messages printed to console
  *	9 -- Return number of unread characters in the log buffer
+ *     10 -- Return size of the log buffer
  */
 int do_syslog(int type, char __user * buf, int len)
 {
@@ -359,6 +360,9 @@ int do_syslog(int type, char __user * buf, int len)
 	case 9:		/* Number of chars in the log buffer */
 		error = log_end - log_start;
 		break;
+	case 10:	/* Size of the log buffer */
+		error = log_buf_len;
+		break;
 	default:
 		error = -EINVAL;
 		break;

lib/rwsem-spinlock.c

@@ -71,10 +71,11 @@ static inline struct rw_semaphore *__rwsem_do_wake(struct rw_semaphore *sem, int
 	if (waiter->flags & RWSEM_WAITING_FOR_WRITE) {
 		sem->activity = -1;
 		list_del(&waiter->list);
-		mb();
 		tsk = waiter->task;
+		mb();
 		waiter->task = NULL;
 		wake_up_process(tsk);
+		put_task_struct(tsk);
 		goto out;
 	}
 
@@ -85,10 +86,11 @@ static inline struct rw_semaphore *__rwsem_do_wake(struct rw_semaphore *sem, int
 		struct list_head *next = waiter->list.next;
 
 		list_del(&waiter->list);
-		mb();
 		tsk = waiter->task;
+		mb();
 		waiter->task = NULL;
 		wake_up_process(tsk);
+		put_task_struct(tsk);
 		woken++;
 		if (list_empty(&sem->wait_list))
 			break;
@@ -115,10 +117,11 @@ static inline struct rw_semaphore *__rwsem_wake_one_writer(struct rw_semaphore *
 	waiter = list_entry(sem->wait_list.next,struct rwsem_waiter,list);
 	list_del(&waiter->list);
 
-	mb();
 	tsk = waiter->task;
+	mb();
 	waiter->task = NULL;
 	wake_up_process(tsk);
+	put_task_struct(tsk);
 	return sem;
 }
 
@@ -147,6 +150,7 @@ void fastcall __down_read(struct rw_semaphore *sem)
 	/* set up my own style of waitqueue */
 	waiter.task = tsk;
 	waiter.flags = RWSEM_WAITING_FOR_READ;
+	get_task_struct(tsk);
 
 	list_add_tail(&waiter.list,&sem->wait_list);
 
@@ -215,6 +219,7 @@ void fastcall __down_write(struct rw_semaphore *sem)
 	/* set up my own style of waitqueue */
 	waiter.task = tsk;
 	waiter.flags = RWSEM_WAITING_FOR_WRITE;
+	get_task_struct(tsk);
 
 	list_add_tail(&waiter.list,&sem->wait_list);
 

lib/rwsem.c

@@ -65,10 +65,11 @@ static inline struct rw_semaphore *__rwsem_do_wake(struct rw_semaphore *sem, int
 		goto readers_only;
 
 	list_del(&waiter->list);
-	mb();
 	tsk = waiter->task;
+	mb();
 	waiter->task = NULL;
 	wake_up_process(tsk);
+	put_task_struct(tsk);
 	goto out;
 
 	/* don't want to wake any writers */
@@ -102,10 +103,11 @@ static inline struct rw_semaphore *__rwsem_do_wake(struct rw_semaphore *sem, int
 	for (; loop>0; loop--) {
 		waiter = list_entry(next,struct rwsem_waiter,list);
 		next = waiter->list.next;
-		mb();
 		tsk = waiter->task;
+		mb();
 		waiter->task = NULL;
 		wake_up_process(tsk);
+		put_task_struct(tsk);
 	}
 
 	sem->wait_list.next = next;
@@ -137,6 +139,7 @@ static inline struct rw_semaphore *rwsem_down_failed_common(struct rw_semaphore
 	/* set up my own style of waitqueue */
 	spin_lock(&sem->wait_lock);
 	waiter->task = tsk;
+	get_task_struct(tsk);
 
 	list_add_tail(&waiter->list,&sem->wait_list);
 

mm/filemap.c

@@ -240,12 +240,6 @@ int filemap_write_and_wait(struct address_space *mapping)
 }
 
 /*
- * This adds a page to the page cache, starting out as locked, unreferenced,
- * not uptodate and with no errors.
- *
- * This function is used for two things: adding newly allocated pagecache
- * pages and for moving existing anon pages into swapcache.
- *
  * This function is used to add newly allocated pagecache pages:
  * the page is new, so we can just run SetPageLocked() against it.
  * The other page state flags were set by rmqueue().

mm/mremap.c

@@ -137,7 +137,8 @@ move_one_page(struct vm_area_struct *vma, unsigned long old_addr,
 				error = -ENOMEM;
 			pte_unmap_nested(src);
 		}
-		pte_unmap(dst);
+		if (dst)
+			pte_unmap(dst);
 	}
 	spin_unlock(&mm->page_table_lock);
 	pte_chain_free(pte_chain);

mm/rmap.c

@@ -39,7 +39,7 @@
  * Something oopsable to put for now in the page->mapping
  * of an anonymous page, to test that it is ignored.
  */
-#define ANON_MAPPING_DEBUG	((struct address_space *) 0xADB)
+#define ANON_MAPPING_DEBUG	((struct address_space *) 0)
 
 static inline void clear_page_anon(struct page *page)
 {

net/core/netpoll.c

@@ -2,6 +2,11 @@
  * Common framework for low-level network console, dump, and debugger code
  *
  * Sep 8 2003  Matt Mackall <mpm@selenic.com>
+ *
+ * based on the netconsole code from:
+ *
+ * Copyright (C) 2001  Ingo Molnar <mingo@redhat.com>
+ * Copyright (C) 2002  Red Hat, Inc.
  */
 
 #include <linux/smp_lock.h>

net/sctp/associola.c

@@ -608,7 +608,7 @@ void sctp_assoc_control_transport(struct sctp_association *asoc,
 	switch (command) {
 	case SCTP_TRANSPORT_UP:
 		transport->active = SCTP_ACTIVE;
-		spc_state = SCTP_ADDR_REACHABLE;
+		spc_state = SCTP_ADDR_AVAILABLE;
 		break;
 
 	case SCTP_TRANSPORT_DOWN:
@@ -936,6 +936,9 @@ void sctp_assoc_migrate(struct sctp_association *assoc, struct sock *newsk)
 void sctp_assoc_update(struct sctp_association *asoc,
 		       struct sctp_association *new)
 {
+	struct sctp_transport *trans;
+	struct list_head *pos, *temp;
+
 	/* Copy in new parameters of peer. */
 	asoc->c = new->c;
 	asoc->peer.rwnd = new->peer.rwnd;
@@ -944,20 +947,19 @@ void sctp_assoc_update(struct sctp_association *asoc,
 	sctp_tsnmap_init(&asoc->peer.tsn_map, SCTP_TSN_MAP_SIZE,
 			 asoc->peer.i.initial_tsn);
 
-	/* FIXME:
-	 *    Do we need to copy primary_path etc?
-	 *
-	 *    More explicitly, addresses may have been removed and
-	 *    this needs accounting for.
-	 */
+	/* Remove any peer addresses not present in the new association. */
+	list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) {
+		trans = list_entry(pos, struct sctp_transport, transports);
+		if (!sctp_assoc_lookup_paddr(new, &trans->ipaddr))
+			sctp_assoc_del_peer(asoc, &trans->ipaddr);
+	}
 
 	/* If the case is A (association restart), use
 	 * initial_tsn as next_tsn. If the case is B, use
 	 * current next_tsn in case data sent to peer
 	 * has been discarded and needs retransmission.
 	 */
-	if (sctp_state(asoc, ESTABLISHED)) {
-
+	if (asoc->state >= SCTP_STATE_ESTABLISHED) {
 		asoc->next_tsn = new->next_tsn;
 		asoc->ctsn_ack_point = new->ctsn_ack_point;
 		asoc->adv_peer_ack_point = new->adv_peer_ack_point;
@@ -968,6 +970,15 @@ void sctp_assoc_update(struct sctp_association *asoc,
 		sctp_ssnmap_clear(asoc->ssnmap);
 
 	} else {
+		/* Add any peer addresses from the new association. */
+		list_for_each(pos, &new->peer.transport_addr_list) {
+			trans = list_entry(pos, struct sctp_transport,
+					   transports);
+			if (!sctp_assoc_lookup_paddr(asoc, &trans->ipaddr))
+				sctp_assoc_add_peer(asoc, &trans->ipaddr,
+						    GFP_ATOMIC);
+		}
+
 		asoc->ctsn_ack_point = asoc->next_tsn - 1;
 		asoc->adv_peer_ack_point = asoc->ctsn_ack_point;
 		if (!asoc->ssnmap) {
@@ -976,7 +987,6 @@ void sctp_assoc_update(struct sctp_association *asoc,
 			new->ssnmap = NULL;
 		}
 	}
-
 }
 
 /* Update the retran path for sending a retransmitted packet.

net/sctp/crc32c.c

@@ -69,7 +69,7 @@
 /* with 24 and 32 Parity Bits",                                  */
 /* IEEE Transactions on Communications, Vol.41, No.6, June 1993  */
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
-__u32 crc_c[256] = {
+static const __u32 crc_c[256] = {
 	0x00000000, 0xF26B8303, 0xE13B70F7, 0x1350F3F4,
 	0xC79A971F, 0x35F1141C, 0x26A1E7E8, 0xD4CA64EB,
 	0x8AD958CF, 0x78B2DBCC, 0x6BE22838, 0x9989AB3B,