Commit ca078bae authored by Pavel Machek's avatar Pavel Machek Committed by Linus Torvalds

[PATCH] swsusp: switch pm_message_t to struct

This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]
Signed-off-by: default avatarPavel Machek <pavel@suse.cz>
Signed-off-by: default avatarAlexander Nyberg <alexn@telia.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 829ca9a3
......@@ -105,7 +105,7 @@ static int of_device_remove(struct device *dev)
return 0;
}
static int of_device_suspend(struct device *dev, u32 state)
static int of_device_suspend(struct device *dev, pm_message_t state)
{
struct of_device * of_dev = to_of_device(dev);
struct of_platform_driver * drv = to_of_platform_driver(dev->driver);
......
......@@ -26,11 +26,11 @@ int resume_device(struct device * dev)
down(&dev->sem);
if (dev->power.pm_parent
&& dev->power.pm_parent->power.power_state) {
&& dev->power.pm_parent->power.power_state.event) {
dev_err(dev, "PM: resume from %d, parent %s still %d\n",
dev->power.power_state,
dev->power.power_state.event,
dev->power.pm_parent->bus_id,
dev->power.pm_parent->power.power_state);
dev->power.pm_parent->power.power_state.event);
}
if (dev->bus && dev->bus->resume) {
dev_dbg(dev,"resuming\n");
......@@ -54,7 +54,7 @@ void dpm_resume(void)
list_add_tail(entry, &dpm_active);
up(&dpm_list_sem);
if (!dev->power.prev_state)
if (!dev->power.prev_state.event)
resume_device(dev);
down(&dpm_list_sem);
put_device(dev);
......
......@@ -13,10 +13,10 @@
static void runtime_resume(struct device * dev)
{
dev_dbg(dev, "resuming\n");
if (!dev->power.power_state)
if (!dev->power.power_state.event)
return;
if (!resume_device(dev))
dev->power.power_state = 0;
dev->power.power_state = PMSG_ON;
}
......@@ -49,10 +49,10 @@ int dpm_runtime_suspend(struct device * dev, pm_message_t state)
int error = 0;
down(&dpm_sem);
if (dev->power.power_state == state)
if (dev->power.power_state.event == state.event)
goto Done;
if (dev->power.power_state)
if (dev->power.power_state.event)
runtime_resume(dev);
if (!(error = suspend_device(dev, state)))
......
......@@ -40,22 +40,22 @@ int suspend_device(struct device * dev, pm_message_t state)
int error = 0;
down(&dev->sem);
if (dev->power.power_state) {
if (dev->power.power_state.event) {
dev_dbg(dev, "PM: suspend %d-->%d\n",
dev->power.power_state, state);
dev->power.power_state.event, state.event);
}
if (dev->power.pm_parent
&& dev->power.pm_parent->power.power_state) {
&& dev->power.pm_parent->power.power_state.event) {
dev_err(dev,
"PM: suspend %d->%d, parent %s already %d\n",
dev->power.power_state, state,
dev->power.power_state.event, state.event,
dev->power.pm_parent->bus_id,
dev->power.pm_parent->power.power_state);
dev->power.pm_parent->power.power_state.event);
}
dev->power.prev_state = dev->power.power_state;
if (dev->bus && dev->bus->suspend && !dev->power.power_state) {
if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
dev_dbg(dev, "suspending\n");
error = dev->bus->suspend(dev, state);
}
......
......@@ -26,19 +26,19 @@
static ssize_t state_show(struct device * dev, struct device_attribute *attr, char * buf)
{
return sprintf(buf, "%u\n", dev->power.power_state);
return sprintf(buf, "%u\n", dev->power.power_state.event);
}
static ssize_t state_store(struct device * dev, struct device_attribute *attr, const char * buf, size_t n)
{
u32 state;
pm_message_t state;
char * rest;
int error = 0;
state = simple_strtoul(buf, &rest, 10);
state.event = simple_strtoul(buf, &rest, 10);
if (*rest)
return -EINVAL;
if (state)
if (state.event)
error = dpm_runtime_suspend(dev, state);
else
dpm_runtime_resume(dev);
......
......@@ -1229,7 +1229,7 @@ static int generic_ide_suspend(struct device *dev, pm_message_t state)
rq.special = &args;
rq.pm = &rqpm;
rqpm.pm_step = ide_pm_state_start_suspend;
rqpm.pm_state = state;
rqpm.pm_state = state.event;
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
......@@ -1248,7 +1248,7 @@ static int generic_ide_resume(struct device *dev)
rq.special = &args;
rq.pm = &rqpm;
rqpm.pm_step = ide_pm_state_start_resume;
rqpm.pm_state = 0;
rqpm.pm_state = PM_EVENT_ON;
return ide_do_drive_cmd(drive, &rq, ide_head_wait);
}
......
......@@ -350,9 +350,9 @@ static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
{
ide_hwif_t *hwif = NULL;
printk("SC1200: suspend(%u)\n", state);
printk("SC1200: suspend(%u)\n", state.event);
if (state == 0) {
if (state.event == PM_EVENT_ON) {
// we only save state when going from full power to less
//
......@@ -386,8 +386,8 @@ static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
/* You don't need to iterate over disks -- sysfs should have done that for you already */
pci_disable_device(dev);
pci_set_power_state(dev,state);
dev->current_state = state;
pci_set_power_state(dev, pci_choose_state(dev, state));
dev->current_state = state.event;
return 0;
}
......@@ -396,8 +396,8 @@ static int sc1200_resume (struct pci_dev *dev)
ide_hwif_t *hwif = NULL;
printk("SC1200: resume\n");
pci_set_power_state(dev,0); // bring chip back from sleep state
dev->current_state = 0;
pci_set_power_state(dev, PCI_D0); // bring chip back from sleep state
dev->current_state = PM_EVENT_ON;
pci_enable_device(dev);
//
// loop over all interfaces that are part of this pci device:
......
......@@ -1509,7 +1509,7 @@ pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t state)
ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
int rc = 0;
if (state != mdev->ofdev.dev.power.power_state && state >= 2) {
if (state.event != mdev->ofdev.dev.power.power_state.event && state.event >= PM_EVENT_SUSPEND) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
mdev->ofdev.dev.power.power_state = state;
......@@ -1524,7 +1524,7 @@ pmac_ide_macio_resume(struct macio_dev *mdev)
ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
int rc = 0;
if (mdev->ofdev.dev.power.power_state != 0) {
if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) {
rc = pmac_ide_do_resume(hwif);
if (rc == 0)
mdev->ofdev.dev.power.power_state = PMSG_ON;
......@@ -1613,7 +1613,7 @@ pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t state)
ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
int rc = 0;
if (state != pdev->dev.power.power_state && state >= 2) {
if (state.event != pdev->dev.power.power_state.event && state.event >= 2) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
pdev->dev.power.power_state = state;
......@@ -1628,7 +1628,7 @@ pmac_ide_pci_resume(struct pci_dev *pdev)
ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
int rc = 0;
if (pdev->dev.power.power_state != 0) {
if (pdev->dev.power.power_state.event != PM_EVENT_ON) {
rc = pmac_ide_do_resume(hwif);
if (rc == 0)
pdev->dev.power.power_state = PMSG_ON;
......
......@@ -708,7 +708,7 @@ static int __pmac media_bay_suspend(struct macio_dev *mdev, pm_message_t state)
{
struct media_bay_info *bay = macio_get_drvdata(mdev);
if (state != mdev->ofdev.dev.power.power_state && state == PM_SUSPEND_MEM) {
if (state.event != mdev->ofdev.dev.power.power_state.event && state.event == PM_EVENT_SUSPEND) {
down(&bay->lock);
bay->sleeping = 1;
set_mb_power(bay, 0);
......@@ -723,7 +723,7 @@ static int __pmac media_bay_resume(struct macio_dev *mdev)
{
struct media_bay_info *bay = macio_get_drvdata(mdev);
if (mdev->ofdev.dev.power.power_state != 0) {
if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) {
mdev->ofdev.dev.power.power_state = PMSG_ON;
/* We re-enable the bay using it's previous content
......
......@@ -3065,7 +3065,7 @@ static int pmu_sys_suspended = 0;
static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
{
if (state != PM_SUSPEND_DISK || pmu_sys_suspended)
if (state.event != PM_EVENT_SUSPEND || pmu_sys_suspended)
return 0;
/* Suspend PMU event interrupts */
......
......@@ -888,7 +888,7 @@ static int cinergyt2_suspend (struct usb_interface *intf, pm_message_t state)
if (down_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
if (state > 0) { /* state 0 seems to mean DEVICE_PM_ON */
if (state.event > PM_EVENT_ON) {
struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf);
#ifdef ENABLE_RC
cancel_delayed_work(&cinergyt2->rc_query_work);
......
......@@ -1757,12 +1757,12 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
idev = ndev->priv;
down(&idev->sem);
if (pdev->current_state != 0) { /* already suspended */
if (state > pdev->current_state) { /* simply go deeper */
pci_set_power_state(pdev,state);
pdev->current_state = state;
if (state.event > pdev->current_state) { /* simply go deeper */
pci_set_power_state(pdev, pci_choose_state(pdev, state));
pdev->current_state = state.event;
}
else
IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state);
IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state.event);
up(&idev->sem);
return 0;
}
......@@ -1777,7 +1777,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
}
pci_set_power_state(pdev, pci_choose_state(pdev, state));
pdev->current_state = state;
pdev->current_state = state.event;
idev->resume_ok = 1;
up(&idev->sem);
return 0;
......
......@@ -2239,7 +2239,7 @@ static void airo_read_stats(struct airo_info *ai) {
u32 *vals = stats_rid.vals;
clear_bit(JOB_STATS, &ai->flags);
if (ai->power) {
if (ai->power.event) {
up(&ai->sem);
return;
}
......@@ -2969,7 +2969,7 @@ static int airo_thread(void *data) {
break;
}
if (ai->power || test_bit(FLAG_FLASHING, &ai->flags)) {
if (ai->power.event || test_bit(FLAG_FLASHING, &ai->flags)) {
up(&ai->sem);
continue;
}
......@@ -5521,7 +5521,7 @@ static int airo_pci_resume(struct pci_dev *pdev)
pci_restore_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, ai->power), 0);
if (ai->power > 1) {
if (ai->power.event > 1) {
reset_card(dev, 0);
mpi_init_descriptors(ai);
setup_card(ai, dev->dev_addr, 0);
......@@ -7123,7 +7123,7 @@ static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
int rc = 0;
struct airo_info *ai = (struct airo_info *)dev->priv;
if (ai->power)
if (ai->power.event)
return 0;
switch (cmd) {
......@@ -7202,7 +7202,7 @@ static void airo_read_wireless_stats(struct airo_info *local)
/* Get stats out of the card */
clear_bit(JOB_WSTATS, &local->flags);
if (local->power) {
if (local->power.event) {
up(&local->sem);
return;
}
......
......@@ -333,13 +333,17 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
if (platform_pci_choose_state) {
ret = platform_pci_choose_state(dev, state);
if (ret >= 0)
state = ret;
state.event = ret;
}
switch (state) {
case 0: return PCI_D0;
case 3: return PCI_D3hot;
switch (state.event) {
case PM_EVENT_ON:
return PCI_D0;
case PM_EVENT_FREEZE:
case PM_EVENT_SUSPEND:
return PCI_D3hot;
default:
printk("They asked me for state %d\n", state);
printk("They asked me for state %d\n", state.event);
BUG();
}
return PCI_D0;
......
......@@ -1766,7 +1766,7 @@ static int mesh_suspend(struct macio_dev *mdev, pm_message_t state)
struct mesh_state *ms = (struct mesh_state *)macio_get_drvdata(mdev);
unsigned long flags;
if (state == mdev->ofdev.dev.power.power_state || state < 2)
if (state.event == mdev->ofdev.dev.power.power_state.event || state.event < 2)
return 0;
scsi_block_requests(ms->host);
......@@ -1791,7 +1791,7 @@ static int mesh_resume(struct macio_dev *mdev)
struct mesh_state *ms = (struct mesh_state *)macio_get_drvdata(mdev);
unsigned long flags;
if (mdev->ofdev.dev.power.power_state == 0)
if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON)
return 0;
set_mesh_power(ms, 1);
......@@ -1802,7 +1802,7 @@ static int mesh_resume(struct macio_dev *mdev)
enable_irq(ms->meshintr);
scsi_unblock_requests(ms->host);
mdev->ofdev.dev.power.power_state = 0;
mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON;
return 0;
}
......
......@@ -1600,7 +1600,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
return 0;
}
if (pm_state == mdev->ofdev.dev.power.power_state || pm_state < 2)
if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
return 0;
pmz_debug("suspend, switching to state %d\n", pm_state);
......@@ -1660,7 +1660,7 @@ static int pmz_resume(struct macio_dev *mdev)
if (uap == NULL)
return 0;
if (mdev->ofdev.dev.power.power_state == 0)
if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON)
return 0;
pmz_debug("resume, switching to state 0\n");
......@@ -1713,7 +1713,7 @@ static int pmz_resume(struct macio_dev *mdev)
pmz_debug("resume, switching complete\n");
mdev->ofdev.dev.power.power_state = 0;
mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON;
return 0;
}
......
......@@ -1570,7 +1570,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
struct usb_driver *driver;
intf = udev->actconfig->interface[i];
if (state <= intf->dev.power.power_state)
if (state.event <= intf->dev.power.power_state.event)
continue;
if (!intf->dev.driver)
continue;
......@@ -1578,11 +1578,11 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
if (driver->suspend) {
status = driver->suspend(intf, state);
if (intf->dev.power.power_state != state
if (intf->dev.power.power_state.event != state.event
|| status)
dev_err(&intf->dev,
"suspend %d fail, code %d\n",
state, status);
state.event, status);
}
/* only drivers with suspend() can ever resume();
......@@ -1595,7 +1595,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
* since we know every driver's probe/disconnect works
* even for drivers that can't suspend.
*/
if (!driver->suspend || state > PM_SUSPEND_MEM) {
if (!driver->suspend || state.event > PM_EVENT_FREEZE) {
#if 1
dev_warn(&intf->dev, "resume is unsafe!\n");
#else
......@@ -1616,7 +1616,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
* policies (when HNP doesn't apply) once we have mechanisms to
* turn power back on! (Likely not before 2.7...)
*/
if (state > PM_SUSPEND_MEM) {
if (state.event > PM_EVENT_FREEZE) {
dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
}
......@@ -1733,7 +1733,7 @@ static int finish_port_resume(struct usb_device *udev)
struct usb_driver *driver;
intf = udev->actconfig->interface[i];
if (intf->dev.power.power_state == PMSG_ON)
if (intf->dev.power.power_state.event == PM_EVENT_ON)
continue;
if (!intf->dev.driver) {
/* FIXME maybe force to alt 0 */
......@@ -1747,11 +1747,11 @@ static int finish_port_resume(struct usb_device *udev)
/* can we do better than just logging errors? */
status = driver->resume(intf);
if (intf->dev.power.power_state != PMSG_ON
if (intf->dev.power.power_state.event != PM_EVENT_ON
|| status)
dev_dbg(&intf->dev,
"resume fail, state %d code %d\n",
intf->dev.power.power_state, status);
intf->dev.power.power_state.event, status);
}
status = 0;
......@@ -1934,7 +1934,7 @@ static int hub_resume(struct usb_interface *intf)
unsigned port1;
int status;
if (intf->dev.power.power_state == PM_SUSPEND_ON)
if (intf->dev.power.power_state.event == PM_EVENT_ON)
return 0;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
......
......@@ -1400,7 +1400,7 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message)
driver = to_usb_driver(dev->driver);
/* there's only one USB suspend state */
if (intf->dev.power.power_state)
if (intf->dev.power.power_state.event)
return 0;
if (driver->suspend)
......
......@@ -641,7 +641,7 @@ show_registers (struct class_device *class_dev, char *buf)
spin_lock_irqsave (&ehci->lock, flags);
if (bus->controller->power.power_state) {
if (bus->controller->power.power_state.event) {
size = scnprintf (next, size,
"bus %s, device %s (driver " DRIVER_VERSION ")\n"
"%s\n"
......
......@@ -631,7 +631,7 @@ show_registers (struct class_device *class_dev, char *buf)
hcd->product_desc,
hcd_name);
if (bus->controller->power.power_state) {
if (bus->controller->power.power_state.event) {
size -= scnprintf (next, size,
"SUSPENDED (no register access)\n");
goto done;
......
......@@ -1781,9 +1781,9 @@ sl811h_suspend(struct device *dev, pm_message_t state, u32 phase)
if (phase != SUSPEND_POWER_DOWN)
return retval;
if (state <= PM_SUSPEND_MEM)
if (state.event == PM_EVENT_FREEZE)
retval = sl811h_hub_suspend(hcd);
else
else if (state.event == PM_EVENT_SUSPEND)
port_power(sl811, 0);
if (retval == 0)
dev->power.power_state = state;
......@@ -1802,7 +1802,7 @@ sl811h_resume(struct device *dev, u32 phase)
/* with no "check to see if VBUS is still powered" board hook,
* let's assume it'd only be powered to enable remote wakeup.
*/
if (dev->power.power_state > PM_SUSPEND_MEM
if (dev->power.power_state.event == PM_EVENT_SUSPEND
|| !hcd->can_wakeup) {
sl811->port1 = 0;
port_power(sl811, 1);
......
......@@ -1533,7 +1533,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
if (down_interruptible (&dev->sem))
return -ERESTARTSYS;
if (intf->dev.power.power_state != PMSG_ON) {
if (intf->dev.power.power_state.event != PM_EVENT_ON) {
up (&dev->sem);
return -EHOSTUNREACH;
}
......
......@@ -2323,17 +2323,16 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
* can properly take care of D3 ? Also, with swsusp, we
* know we'll be rebooted, ...
*/
#ifdef CONFIG_PPC_PMAC
#ifndef CONFIG_PPC_PMAC
/* HACK ALERT ! Once I find a proper way to say to each driver
* individually what will happen with it's PCI slot, I'll change
* that. On laptops, the AGP slot is just unclocked, so D2 is
* expected, while on desktops, the card is powered off
*/
if (state >= 3)
state = 2;
return 0;
#endif /* CONFIG_PPC_PMAC */
if (state != 2 || state == pdev->dev.power.power_state)
if (state.event == pdev->dev.power.power_state.event)
return 0;
printk(KERN_DEBUG "aty128fb: suspending...\n");
......@@ -2367,7 +2366,7 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
* used dummy fb ops, 2.5 need proper support for this at the
* fbdev level
*/
if (state == 2)
if (state.event != PM_EVENT_ON)
aty128_set_suspend(par, 1);
release_console_sem();
......@@ -2382,12 +2381,11 @@ static int aty128_do_resume(struct pci_dev *pdev)
struct fb_info *info = pci_get_drvdata(pdev);
struct aty128fb_par *par = info->par;
if (pdev->dev.power.power_state == 0)
if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
/* Wakeup chip */
if (pdev->dev.power.power_state == 2)
aty128_set_suspend(par, 0);
aty128_set_suspend(par, 0);
par->asleep = 0;
/* Restore display & engine */
......
......@@ -2022,17 +2022,16 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
#ifdef CONFIG_PPC_PMAC
#ifndef CONFIG_PPC_PMAC
/* HACK ALERT ! Once I find a proper way to say to each driver
* individually what will happen with it's PCI slot, I'll change
* that. On laptops, the AGP slot is just unclocked, so D2 is
* expected, while on desktops, the card is powered off
*/
if (state >= 3)
state = 2;
return 0;
#endif /* CONFIG_PPC_PMAC */
if (state != 2 || state == pdev->dev.power.power_state)
if (state.event == pdev->dev.power.power_state.event)
return 0;
acquire_console_sem();
......@@ -2071,12 +2070,12 @@ static int atyfb_pci_resume(struct pci_dev *pdev)
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
if (pdev->dev.power.power_state == 0)
if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
acquire_console_sem();
if (pdev->dev.power.power_state == 2)
if (pdev->dev.power.power_state.event == 2)
aty_power_mgmt(0, par);
par->asleep = 0;
......
......@@ -2526,18 +2526,18 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
struct radeonfb_info *rinfo = info->par;
int i;
if (state == pdev->dev.power.power_state)
if (state.event == pdev->dev.power.power_state.event)
return 0;
printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n",
pci_name(pdev), state);
pci_name(pdev), state.event);
/* For suspend-to-disk, we cheat here. We don't suspend anything and
* let fbcon continue drawing until we are all set. That shouldn't
* really cause any problem at this point, provided that the wakeup
* code knows that any state in memory may not match the HW
*/
if (state != PM_SUSPEND_MEM)
if (state.event == PM_EVENT_FREEZE)
goto done;
acquire_console_sem();
......@@ -2616,7 +2616,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
struct radeonfb_info *rinfo = info->par;
int rc = 0;
if (pdev->dev.power.power_state == 0)
if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
if (rinfo->no_schedule) {
......@@ -2626,7 +2626,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
acquire_console_sem();
printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
pci_name(pdev), pdev->dev.power.power_state);
pci_name(pdev), pdev->dev.power.power_state.event);
if (pci_enable_device(pdev)) {
......@@ -2637,7 +2637,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
}
pci_set_master(pdev);
if (pdev->dev.power.power_state == PM_SUSPEND_MEM) {
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
/* Wakeup chip. Check from config space if we were powered off
* (todo: additionally, check CLK_PIN_CNTL too)
*/
......
......@@ -462,9 +462,9 @@ static int chipsfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct fb_info *p = pci_get_drvdata(pdev);
if (state == pdev->dev.power.power_state)
if (state.event == pdev->dev.power.power_state.event)
return 0;
if (state != PM_SUSPEND_MEM)
if (state.event != PM_SUSPEND_MEM)
goto done;
acquire_console_sem();
......
......@@ -1506,12 +1506,12 @@ static int i810fb_suspend(struct pci_dev *dev, pm_message_t state)
struct i810fb_par *par = (struct i810fb_par *) info->par;
int blank = 0, prev_state = par->cur_state;
if (state == prev_state)
if (state.event == prev_state)
return 0;
par->cur_state = state;
par->cur_state = state.event;
switch (state) {
switch (state.event) {
case 1:
blank = VESA_VSYNC_SUSPEND;
break;
......
......@@ -186,7 +186,9 @@ extern int pm_suspend(suspend_state_t state);
struct device;
typedef u32 __bitwise pm_message_t;
typedef struct pm_message {
int event;
} pm_message_t;
/*
* There are 4 important states driver can be in:
......@@ -207,9 +209,13 @@ typedef u32 __bitwise pm_message_t;
* or something similar soon.
*/
#define PMSG_FREEZE ((__force pm_message_t) 3)
#define PMSG_SUSPEND ((__force pm_message_t) 3)
#define PMSG_ON ((__force pm_message_t) 0)
#define PM_EVENT_ON 0
#define PM_EVENT_FREEZE 1
#define PM_EVENT_SUSPEND 2
#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
struct dev_pm_info {
pm_message_t power_state;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment