Merge branch 'fbdev/udlfb'

drivers/staging/Kconfig

@@ -111,8 +111,6 @@ source "drivers/staging/vt6655/Kconfig"
 
 source "drivers/staging/vt6656/Kconfig"
 
-source "drivers/staging/udlfb/Kconfig"
-
 source "drivers/staging/hv/Kconfig"
 
 source "drivers/staging/vme/Kconfig"

drivers/staging/Makefile

@@ -38,7 +38,6 @@ obj-$(CONFIG_USB_SERIAL_QUATECH_USB2)	+= quatech_usb2/
 obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
 obj-$(CONFIG_VT6655)		+= vt6655/
 obj-$(CONFIG_VT6656)		+= vt6656/
-obj-$(CONFIG_FB_UDL)		+= udlfb/
 obj-$(CONFIG_HYPERV)		+= hv/
 obj-$(CONFIG_VME_BUS)		+= vme/
 obj-$(CONFIG_MRST_RAR_HANDLER)	+= memrar/

drivers/staging/udlfb/Kconfig

-config FB_UDL
-	tristate "Displaylink USB Framebuffer support"
-	depends on FB && USB
-	select FB_MODE_HELPERS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	---help---
-	  This is a kernel framebuffer driver for DisplayLink USB devices.
-	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
-	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
-	  To compile as a module, choose M here: the module name is udlfb.

drivers/staging/udlfb/Makefile

-obj-$(CONFIG_FB_UDL)		+= udlfb.o

drivers/video/Kconfig

@@ -2116,6 +2116,20 @@ config FB_SM501
 
 	  If unsure, say N.
 
+config FB_UDL
+	tristate "Displaylink USB Framebuffer support"
+	depends on FB && USB
+	select FB_MODE_HELPERS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	---help---
+	  This is a kernel framebuffer driver for DisplayLink USB devices.
+	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
+	  To compile as a module, choose M here: the module name is udlfb.
 
 config FB_PNX4008_DUM
 	tristate "Display Update Module support on Philips PNX4008 board"

drivers/video/Makefile

@@ -125,6 +125,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
 obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
 obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
+obj-$(CONFIG_FB_UDL)		  += udlfb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
 obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o

drivers/staging/udlfb/udlfb.h → include/video/udlfb.h

@@ -65,9 +65,6 @@ struct dlfb_data {
 #define MAX_TRANSFER (PAGE_SIZE*16 - BULK_SIZE)
 #define WRITES_IN_FLIGHT (4)
 
-#define MIN_EDID_SIZE 128
-#define MAX_EDID_SIZE 128
-
 #define MAX_VENDOR_DESCRIPTOR_SIZE 256
 
 #define GET_URB_TIMEOUT	HZ
@@ -95,23 +92,4 @@ struct dlfb_data {
 #define DL_ALIGN_UP(x, a) ALIGN(x, a)
 #define DL_ALIGN_DOWN(x, a) ALIGN(x-(a-1), a)
 
-/* remove once this gets added to sysfs.h */
-#define __ATTR_RW(attr) __ATTR(attr, 0644, attr##_show, attr##_store)
-
-/*
- * udlfb is both a usb device, and a framebuffer device.
- * They may exist at the same time, but during various stages
- * inactivity, teardown, or "virtual" operation, only one or the
- * other will exist (one will outlive the other).  So we can't
- * call the dev_*() macros, because we don't have a stable dev object.
- */
-#define dl_err(format, arg...) \
-	pr_err("udlfb: " format, ## arg)
-#define dl_warn(format, arg...) \
-	pr_warning("udlfb: " format, ## arg)
-#define dl_notice(format, arg...) \
-	pr_notice("udlfb: " format, ## arg)
-#define dl_info(format, arg...) \
-	pr_info("udlfb: " format, ## arg)
-
 #endif