V4L/DVB (9044): Add support for Pinnacle PCTV HD Pro 801e (ATSC only)

Add digital support for the Pinnacle PCTV HD Pro 801e (usb id 2304:023a)

Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new
firmware fixing the issue with the i2c that prevented the xc5000 from working.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-usb/dib0700.h

@@ -42,6 +42,7 @@ struct dib0700_state {
 	u8 rc_counter;
 	u8 is_dib7000pc;
 	u8 fw_use_new_i2c_api;
+	u8 disable_streaming_master_mode;
 };
 
 extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);

drivers/media/dvb/dvb-usb/dib0700_core.c

@@ -350,7 +350,12 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 
 	b[0] = REQUEST_ENABLE_VIDEO;
 	b[1] = (onoff << 4) | 0x00; /* this bit gives a kind of command, rather than enabling something or not */
-	b[2] = (0x01 << 4); /* Master mode */
+
+	if (st->disable_streaming_master_mode == 1)
+		b[2] = 0x00;
+	else
+		b[2] = (0x01 << 4); /* Master mode */
+
 	b[3] = 0x00;
 
 	deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id);

drivers/media/dvb/dvb-usb/dib0700_devices.c

@@ -14,6 +14,8 @@
 #include "mt2060.h"
 #include "mt2266.h"
 #include "tuner-xc2028.h"
+#include "xc5000.h"
+#include "s5h1411.h"
 #include "dib0070.h"
 
 static int force_lna_activation;
@@ -1078,6 +1080,89 @@ static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
 	return adap->fe == NULL ? -ENODEV : 0;
 }
 
+/* S5H1411 */
+static struct s5h1411_config pinnacle_801e_config = {
+	.output_mode   = S5H1411_PARALLEL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.mpeg_timing   = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
+	.qam_if        = S5H1411_IF_44000,
+	.vsb_if        = S5H1411_IF_44000,
+	.inversion     = S5H1411_INVERSION_OFF,
+	.status_mode   = S5H1411_DEMODLOCKING
+};
+
+/* Pinnacle PCTV HD Pro 801e GPIOs map:
+   GPIO0  - currently unknown
+   GPIO1  - xc5000 tuner reset
+   GPIO2  - CX25843 sleep
+   GPIO3  - currently unknown
+   GPIO4  - currently unknown
+   GPIO6  - currently unknown
+   GPIO7  - currently unknown
+   GPIO9  - currently unknown
+   GPIO10 - CX25843 reset
+ */
+static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* Make use of the new i2c functions from FW 1.20 */
+	st->fw_use_new_i2c_api = 1;
+
+	/* The s5h1411 requires the dib0700 to not be in master mode */
+	st->disable_streaming_master_mode = 1;
+
+	/* All msleep values taken from Windows USB trace */
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
+	dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(400);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	msleep(60);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
+	msleep(30);
+
+	/* Put the CX25843 to sleep for now since we're in digital mode */
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+	/* GPIOs are initialized, do the attach */
+	adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
+			      &adap->dev->i2c_adap);
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+int dib0700_xc5000_tuner_callback(void *priv, int command, int arg)
+{
+	struct dvb_usb_adapter *adap = priv;
+
+	/* Reset the tuner */
+	dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
+	msleep(330); /* from Windows USB trace */
+	dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
+	msleep(330); /* from Windows USB trace */
+
+	return 0;
+}
+
+static struct xc5000_config s5h1411_xc5000_tunerconfig = {
+	.i2c_address      = 0x64,
+	.if_khz           = 5380,
+	.tuner_callback   = dib0700_xc5000_tuner_callback
+};
+
+static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap,
+			  &s5h1411_xc5000_tunerconfig, adap)
+		== NULL ? -ENODEV : 0;
+}
+
 /* DVB-USB and USB stuff follows */
 struct usb_device_id dib0700_usb_id_table[] = {
 /* 0 */	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7700P) },
@@ -1122,6 +1207,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_GIGABYTE,  USB_PID_GIGABYTE_U8000) },
 	{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_STK7700PH) },
 	{ USB_DEVICE(USB_VID_ASUS,	USB_PID_ASUS_U3000H) },
+/* 40 */{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV801E) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1442,6 +1528,31 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 		.rc_key_map       = dib0700_rc_keys,
 		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
 		.rc_query         = dib0700_rc_query
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = s5h1411_frontend_attach,
+				.tuner_attach     = xc5000_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "Pinnacle PCTV HD Pro USB Stick",
+				{ &dib0700_usb_id_table[40], NULL },
+				{ NULL },
+			},
+		},
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
 	},
 };
 

drivers/media/dvb/dvb-usb/dvb-usb-ids.h

@@ -171,6 +171,7 @@
 #define USB_PID_PINNACLE_PCTV71E			0x022b
 #define USB_PID_PINNACLE_PCTV72E			0x0236
 #define USB_PID_PINNACLE_PCTV73E			0x0237
+#define USB_PID_PINNACLE_PCTV801E			0x023a
 #define USB_PID_PCTV_200E				0x020e
 #define USB_PID_PCTV_400E				0x020f
 #define USB_PID_PCTV_450E				0x0222