Commit cc6773b5 authored by Andrew Lunn's avatar Andrew Lunn Committed by Greg Kroah-Hartman

net: phy: marvell: Limit errata to 88m1101


[ Upstream commit f2899788 ]

The 88m1101 has an errata when configuring autoneg. However, it was
being applied to many other Marvell PHYs as well. Limit its scope to
just the 88m1101.

Fixes: 76884679 ("phylib: Add support for Marvell 88e1111S and 88e1145")
Reported-by: default avatarDaniel Walker <danielwa@cisco.com>
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Acked-by: default avatarHarini Katakam <harinik@xilinx.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 4fb5fd27
......@@ -240,34 +240,6 @@ static int marvell_config_aneg(struct phy_device *phydev)
{
int err;
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x1f);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x200c);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x5);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x100);
if (err < 0)
return err;
err = marvell_set_polarity(phydev, phydev->mdix);
if (err < 0)
return err;
......@@ -301,6 +273,42 @@ static int marvell_config_aneg(struct phy_device *phydev)
return 0;
}
static int m88e1101_config_aneg(struct phy_device *phydev)
{
int err;
/* This Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation
*/
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x1f);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x200c);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x5);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x100);
if (err < 0)
return err;
return marvell_config_aneg(phydev);
}
static int m88e1111_config_aneg(struct phy_device *phydev)
{
int err;
......@@ -1491,7 +1499,7 @@ static struct phy_driver marvell_drivers[] = {
.probe = marvell_probe,
.flags = PHY_HAS_INTERRUPT,
.config_init = &marvell_config_init,
.config_aneg = &marvell_config_aneg,
.config_aneg = &m88e1101_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment